Capt Zeen

Here you got it ! You can download it from the web page: http://www.captzeen.com/helios Hope you like it ! ! main discusion: http://forums.eagle.ru/showthread.php?t=141291

Here you got it ! Using similar techniques i used before width the F-15C profile, i managed to send a lot of data from DCS to helios using just the FC2 interface. In the future i want to create a new interface for Helios that cover all the clickable data, but for now, i use the FC2 profile to export as many data as posible. For this profile i exported Radio Indicator Compass, Ias, clock, suction indicator, manifold pressure, altimeter, gyroheading, Flight Indicator ADI, Horizont caged, coolant temp, rpm, carburator temp, oil temp, oil press, fuelpress, Gmeter, Gmax and Gmin, VVI, sweep ball, turn needle, back radar light, landing safe light, landing unsafe light, high blower light, oxigen flow, oxigen press, hydraulic press, Anmeter, left tank fuel, fuselaje tank fuel, right tank fuel, rokets counter and all vhf radio lights and buttons I also included switches and buttons for the front Dash, right panel, weapons panel, fuel panel, radiator panel, K-14 gunsight selector-dimmer panel and the VHF radio. I included, aswell, a new keyboard configuration of several switches that don't have a key asigned in DCS, so to enjoy at 100% the profile, you need to configure those keyboard in DCS. Of course i added the navigation panel from others profiles, so you can check airport charts, tactical maps, ndbs, etc The profile works in 4 aspect resolutions: 16:9, 16:19, 5:4 and 4:3 and 5 diferents international keyboards You can download it from the web page: http://www.captzeen.com/helios Hope you like it ! !

Well after that time, i made the f15C profile, and right now i am finishing the P51D profile, Probably this weekend is going to be published. Really dont know what is going to be the next proyect. There are several proyects in mind, Su27/33, MI-8, or perhaps try to implement a new interface for Helios, and see how it works, so this can open the posibilities to create profiles width full capabilities.

Last update before release! I just finished all the works on the core profile, i just need to implement a version for 16/9 and probably 4/3. If everything works well, this weekend i am going to publish it. Here you got the list of the instruments and switches incorporated to the profile, Everything working : Profile Features - Front Dash Indicators: - Radio Indicator Compass - Course knob - Clock - Directional Gyro - Airspeed Indicator - Altimeter - Bank and Turn Indicator - Suction Gauge - Manifold Pressure Gauge - Flight Indicator ADI - Carburetor Air Temperature - Coolant Temperature - Tachometer - Rate of Climb Indicator - Oil Temperature, Fuel, and Oil Pressure Gauge - Accelerometer - Oxygen Pressure Gauge - Oxygen Flow Indicator - Landing gears safe light - Landing gears unsafe light - Parking Brake Handle - Rear warning radar light -K-14 gunsight selector-dimmer panel: - Gyro Selector Switch - Gyro Motor Switch - Dimmer Rheostat -Engine control panel: - SUPERCHARGER BLOWER SWITCH. - High Blower lamp - FUEL BOOSTER SWITCH - OIL DILUTE SWITCH - STARTER SWITCH - PRIMER SWITCH. -Weapons Panel: - IGNITION SELECTOR SWITCH - BOMB-ROCKET SELECTOR SWITCH - BOMB ARMING SWITCHES - COCKPIT LIGHT SWITCH - GUN SAFETY SWITCH - ROCKET RELEASE CONTROL SWITCH - ROCKET COUNTER - Rocket reset knob - ROCKET DELAY SWITCH - HORN SILENCE BUTTON -Fuel Shutoff and Selector Valves panel: - FUEL SHUTOFF VALVE - FUEL SELECTOR VALVE - Landing Gear Fairing Door Emergency Release Handle - Left Wing Main Tank indicator - Fuselage Tank indicator - Right Wing Main Tank indicator -Electric panel: - CIRCUIT BREAKER PANEL - RIGHT-HAND FLUORESCENT LIGHT RHEOSTAT - AMMETER - GENERATOR DISCONNECT SWITCH - BATTERY DISCONNECT SWITCH - GUN HEAT SWITCH - PITOT HEAT SWITCH - Wing POSITION LIGHTS - Tail POSITION LIGHTS - Keying switch reconition lights - Amber Recognition Light switch - Green Recognition Light switch - Red Recognition Light switch AN/APS-13 Rear Warning Radar: - Power switch - Test switch - warning light intensity rheostat switch - Volume knob for VHF set VHF Radio: - OFF button - Channel A Selector - Channel B Selector - Channel C Selector - Channel D Selector - Mode switch - Selected Channel lights - transmission light IFF RADIO and HOMING ADAPTER panels: - All switches included even they are not operative on game actualy, but just in case they come one day. - Navigation panel: -Airports visual operation charts v4.04 -Airports diagramss v4.04 -TC-1 Tactical Chart -Caucasus general area map, with airports and table width freq, locations, ids, etc. -Airport Circuit Example -List of the NDBs - Keyboard panel: - Panel to change internationals keyboards - About panel: - Info about the profile and version.

Once you start is dificult to stop! Some screenshots of the profile 16/10 version ...hope you like !

The proyect is advancing, rightnow, i included the fuel panel, width switches and fuel indicators, the weapons panel, and this weekend i am going to include the electrical panel, as you recomend. Widh all this i think is enought complete to publish it. Unless some one made any other interesant sugestion.

Sorry Abnaxus. I dont know you where making a p51 profile, so i starter one some weeks ago. Right now is very advanced, you can checkit at www.captzeen.com Sorry again, mate.

Hello OZTRIPWIRE lets see... You only need one export.lua The one i am using as a base for my modifications is the Loophole one (prepared to work width KA50, A10C and FC3) So you can run Cap Loz a10c profile, Capt Zeen ka50 and SU25t profiles width the same export.lua. You need a different monitor setup for each one, obvious, because each one uses diferent positions for the mfds. In my case i am using my profiles and the Cap Loz for the A10C with the same export.lua. You dont need to set up again your a10c profile, he knows where the export.lua is right now. If you want to add the ka50 one, make backup copy of you original export.lua first ( just in case you need to come back), and then just setup the profile ka50 in the helios editor. After that, copy ( overwrite) the Loophole export.lua over the one you got in scripts. Be care, if you use tackview, tars or other complement that uses export.lua, you need to copy the correspondents lines to the new loophole one!

Hello again. You are using a 4/3 aspect ratio resolution monitor. Normaly i made the profiles for 16:10 and 16:9 aspect ratio monitor. Thants the reason the profile dont fit your complete screen in vertical.

Load the profile on the editor and check the install path of the game in the profile explorer tab/interfaces/flamin cliffs 2 and then in the flaming cliffs 2.0 setup window. In my profile point to the dcs world openbeta and probably you use the release one. Dont forget to click on the setup flaming cliffs button. After this, check again the export.lua

Looking your image, the profile is not scaled for your monitor resolution, make sure you have the scale box cchecked when you reset your monitors. And start again from the original profile on the package. If the profile allready have a new ( and wrong) scale, probably you cant restore it.

You need to do a reset monitors in the helios profile editor to fix the scale. And you need to use the correct export.lua You can download from my previous post or from the profile package. Follow the instructions on the web or from the readme.txt

No. I am using the rpm instruments from the ka50 to do it, width a new scale on top, and Helios only let me rotate 90 degrees left or right, so this is the nearest posible rotation i can get. Anyway the scale, the numbers and the needle, indicate the correct values.

hello. use this export.lua found in http://forums.eagle.ru/showthread.php?t=97222 width that one you can run the a10c and ka50 and fc3 helios profiles

Hello Gadroc. For the P51 i am exporting all the data using the FC2 interface, sending more than one value in each senddata instruction Im planning to create an interface for the mi-8 when i finish the p51 profile. I was checking on your sources how to do it, probably ill need some help from you. I let you know. One of the interfaces i want to prepare aswell is a FC2 type, but width much more senddatas, not only 18. We can use a interface like this to export general profiles where we dont need send Keys to the game. I have some ideas, i want to comment about the instruments and his graphics. perhaps the posibility to have instruments for general pourposes, were we can change the background and a scale overlay. See you ! and thanks for your words.

New update ! All the gauges, indicators and lights working ! I wanna add the fuel gauges and the fuel rotator switch

Thanks a lot !

Hello all. I am finishing the profile, but need the mainpanel_ini.lua from the P51D. I am working width the TF51D one, becouse i dont got the p51 module. Can some one send to me the mainpanel_ini.lua from the p51 folder ? Thanks.

A little update about the P51 project.... All the instruments exported and working except the clock and the sweep ball. Still need to change the scale on the g-meter and improve the graphics Any sugestions ?

Le hechare un vistazo a ver que veo, pero creo recordar que lo estuve usando (el helios) con el aries y no me dio problema. Lo revisare con la ultima version de aries

I revised again the outputs of the keyboard selector, and there is a mistake in the position 2 (english). The first sentence says "Set hidden Automatic_pilot_esp to flase", and need to be "Set hidden Automatic_pilot_esp to false". Anyway in this profile you can use the spanish one, becouse is the same in all the keyboards except the French. I am going to correct the mistake as soon i arrive at home. Thanks for the bug notification.

Si, debería funcionar con Aries sin ningún problema. Solo hay que asegurarse de que las instrucciones que añade aries en el export.luua, esten al final de todo el codigo. Por cierto... que tal el aries? lo estuvimos probando en el escuadron hace unos meses, pero estaba aun un poco verde.

Los instrumentos funcionan! es el objetivo del profile. Si, este último export.lua es compatible con todos los aparatos.

In the web you got the instructions to configure the second monitor and export the radar.

Hello guys! I was playing this afternoon width Helios, export.lua and P51..... And IT WORKS ! I am right now extracting the gauges. But i really dont know if so many people flight width this bird. My self dont have any experience on it. let me know if there are still interest on it