Inrideo

If they could project the cost of having a dev work on building it natively for Linux and run a Kickstarter I'd contribute to that. That way they wouldn't have to put any money toward it unless it already paid for itself.

Since Betaflight recently added the ability to turn your flight controller into a USB HID device to relay control information from the transmitter to sims like Liftoff and Velocidrone, are there any quad pilots here who are using their transmitter in DCS? I just gave it a quick test with mine and found the cyclic to be fine but the collective to scale poorly, making the Mi8 pretty much impossible to fly, but it's still a good start and I can possibly tweak it to be usable. I'll have to look into mapping the switches too :) If anyone has tried, how's your experience so far?

I'm downloading the NTTR update over a very slow rural connection, and it sucks up the whole thing. Don't want to make the family unhappy for several days, so is there a config option to throttle the download speed? I could go the QoS route on the router, but I find it just slows down everything too.

Cool :) I still have the rubber dust cover from the T.Flight here somewhere to use. I think I may end up abandoning my other project, using the EDTracker as the joystick motion sensor. It works great up on the desk, but I think it's losing location accuracy when mounted on the floor. Maybe some neodymium magnets at floor level would give me a bigger field for the magnetometer to read.

I'll post the STL files online soon and you can just download them for free. If you know someone with a 3D printer you'll be good to go :) I didn't put a detente on it. I just wanted a nice, loose feeling stick. I'd add resistance (if needed) using shocks from an RC car. Maybe I'll add a coupler that slides up on to the conduit above the gimbal that can be locked into place and the shocks can attach to it.

Closeup of the gimbal. It can be floor mounted. or put in a box and the main chassis inverted to bolt to the top of the box. There is a pass-through for the shaft to allow mounting both ways.

I was looking for a printed gimbal on various sites, and didn't find anything I really liked. Found something close on YouTube, and used it for inspiration. The result is a gimbal made for M3 bolts with circular heads, skate bearings, and eventually bolt caps that will house neodymium magnets for use with hall sensors.

Been a long while since I worked on this due to printer issues and other stuff. Anyway, last night I finished up the box for the EDTracker to mount on the PVC Conduit cyclic shaft. I'll still need to make a harness for the wiring, but the movement should be good :) EDTracker in box pictured :)

I'm going to make better pedals now that I know it works. Was pretty sure it would considering the cyclic test went well before. A bit of PVC conduit and some doweling reinforce it and I should have a good set of pedals for a total cost of under 40 dollars, including the EDTracker.

Just took it for a flight on the harbour tour :) Worked great!

Wow. That's some awesome work :D

So there haven't been updates on the cyclic because the 3D printer was out of commission. I'm going to pick up one of those inexpensive Monoprice models next month though, so the cyclic project will continue. In the meantime I threw together a quick and dirty rudder using an EDTracker as the input. You still have to detach it and do the EDtracker Shuffle to get the magnetometer readings calibrated, but after that the rudder should work nicely. I turned pitch scaling down to zero on the EDTracker since there's no need for pitch at all, only Yaw. [ame] [/ame]

I've seen some older threads on here and around the net about using tablets but the verdicts seemed to be lag and other issues. Has it improved any, or are there better solutions now? I'm using an Asus T100TA running Windows 10. Would something like Helios run on the tablet and interface with the cockpit controls? Cheers

Oooh, those keyboard maps are nice :D

Yeah. I had done alt-6 and was getting strange results, and since it does the route follow I used the plain 'A' as a test to see if going as-the-crow-flies would make a difference. And yup, I use alt-9 so my trim resets :)