uniform

I apologize if I should not have decided to open my own thread regarding the display of my gun sites for the SU-25. There is a camouflage patch Where the gun sight and Reticle should display in the HUD. It appears to be only impacting the SU-25. I did try un-installing Flaming Cliffs and reinstalling to DCS World with no avail. I am not using any modifications on any air craft. DCS 2.5 installed after deleting 1.5. I did completely remove 1.5 before installing 2.5. They were also in two different locations. I did have to use the Regedit command from the below location to activate Flaiming Cliffs, and need to do so for several other modules. https://www.digitalcombatsimulator.com/en/support/faq/564/#1780273 CPU: I-5 2nd gen / GPU: Radeon RX468 OC / RAM: 12 Gigabytes DCS 2.5 / Flaming Cliffs If anyone has any suggestions/ideas, I would be greatful. Thank-you.

Okay thanks anyways. Appreciate you replying. Maybe I will open my own thread, but since yours was not responded to, dont see why mine would be either. Have a good day. :)

So I have the same issue you were/are having. The only thing different is my gun sight camouflage for the SU - 25 is Brown not Green. You don't by any chance remember how it was fixed if it was fixed do you? BTW in VR do you mean like Oculus Rift head set? If so I am just using regular monitor. CPU: I-5 2nd gen / GPU: Radeon RX468 OC / RAM: 12 Gigabytes DCS 2.5 / Flaming Cliffs

So does anyone know if there are going to be Mig-29 A and G missions and campaigns for single player? I heard that there was going to be a while back and haven't seen anything yet.

Okay, I know there were many threads started on this, but it seems the answer is read the flight manual or watch you tube. In DCS 1.2 there were limited training videos at least for all aircraft within the package. Now they only exist for the Su-27. Is there any way to download the training missions and or videos for say the MiG 29 A, G, and S models along with the A-10A and Su 33 I believe the other aircraft is? I am tired of reviewing countless of unhelpful you tube vids and pooring over the Mig.29A flight manual trying to discern what information would be relevant. Thanks.

I remember that FC3 Did have training videos at least for all aircraft within the package. This was before the 1.5 Update?

Thanks for the follow up, I must have missed some or misinterpreted your notes.

I found my problem by the way, Trigger points in ME got skewampus. Reinstalled and just fine. Now, I am at the persistent bug of mission 6.

So with this fix, how do you adjust ME so you are not just flying in circles, waiting for SEAD and STRIKE to arrive at WP3? I haven't waited that long (got board.) then you would have to wait for SEAD to do their thing?

So how does one start the attack on Nalchek? The Briefing says to link up at WP4. Then move to WP5 and call the attack. The SEAD must go first. Well, I tried moving to WP5 first, that did not work as all other flights remained at WP4 so I assume you call the attack from 4. When I get to WP4, all other flights just circle including SEAD. I seen in another older post that the SEAD F-16's will automatically move in. They don't. I also do not have SEAD in the F10 menu. When I call the Strike from WP4, the SEAD moves in along with the Strike package. It always turns out with my flight and some of the Strike package being taken out by the SA10s. How do I get the SEAD to move by themselves? DCS 1.5

I am hoping I can get assistance my labels are not working in one specific mission. I don't know if this is a bug in version 1.5 or not and this should be placed somewhere else. It is Stray Eagle, I have tried the other two missions for Huey and multiple in A10C and MI8; with labels working correctly. Actions I have taken: Options All Labels Checked along with use these options for all missions. Mission Editor: Checked and unchecked Enforce box. Un-installed Huey module and Reinstalled. Modifications: logbook.lua only I have changed the time stamps from a 12hr clock to a 24hr clock and added my Huey flight times to get my campaigns back and create Huey flight hours. Also with MI8 and A10C (I seen a post where the question was asked how do you keep time for individual aircraft in Legacy. The response was pencil and paper). I dont think this is the problem as I done the same thing for A-10C -MI8. My campaigns were restored and I have tried missions in both these modules and have not found any that labels don't work. I know it is only one mission but still...

If anyone else knows how to get campaigns back I would appreciate assistance. EDIT: After hours of reviewing, it was right in front of my face. DCS 1.5 is a 24 hr clock. The Legacy version was a 12hr clock. in all files including the created time and mediately after the below location for the campaign you need to go through every time entry and convert it to a 24 hr. clock ["campaign"] = ".\\mods\\aircraft\\Uh-1H\\Missions\\en\\Campaigns/en_UN-Pilot.cmp",

Devrim, I have been suspecting that for a while, Been wanting to replace but haven't had the resources yet; eventually though I will. I appreciate the product names to review. Esonub & USSInchon I did have the dead zones set, at 15 on all AXIS points. My curve is beyond 30 even. I am grateful for your advise though. I use dead zones on all other Aircraft including Ka-50, but some reason in the Huey it just wasn't working for me. I am going to start playing with the curve and reduce it a bit. See if that give me any more control. At least in the Huey, removing Dead Zones has helped tremendously. I do appreciate everyones input. Thank-you all.

Thank-you so much! I was using the dead zones for fixed wing aircraft and it was working out good. Now that I have tried removing the dead zones for rotory wing, or at least the Huey I have much better control and am able to maintain a level flight. I still need to adjust other settings, but this I can tell was a huge issue. Thanks again! :pilotfly: BTW I will make my 3D a floor mount when I have a replacement

I do have deadzones. I will try removing them. Yeah, well I am not taking it apart anytime soon. Not until I can afford a replacement at least. I am going to attempt to floor mount the stick lol.

Thank you NeilWillis, I am not certain if you would be able to assist or if I should post in the thread that you provided to me but thought I would ask anyways. Don't know what I am doing , but I am still showing inactive in the Campaigns after making the changes. (for all aircraft only posted one string for reference) ["campaign"] = ".\\mods\\aircraft\\Uh-1H\\Missions\\en\\Campaigns/en_UN-Pilot.cmp", I didnt change anything in most recent File because there was no date or results. If I should, I dont know how I should make the edit. [15] = { ["stage"] = 15, ["mission"] = "en_UN-Pilot_15.miz", Did download and use Notepad++ If you can assist, I would appreciate it. If not I am thankful for the thread you provided.

Correction, my campaign files are not missing. I have them backed up and they are in my C:/User~saved games. When I click on Campaigns in DCS World though all my modules are showing inactive.

Help! Can anyone assist me in getting my campaigns back? I had updated to DCS World 1.5. Once I logged in I now have all of my module serial keys, joystick and keyboard layouts including my flight log. I am missing my Campaign files for Huey and A-10C and all modules. How do I get them back? I did back up my save files prior to updating.

Yes, I guess I should have been more descriptive. I have already changed my Axis Commands. I don't have the KA-50 in DCS World, that is still 1.0. But for the Huey I have adjusted my curve to 44 and my dead zone is 15. I too have used the 3D Pro for years, and on multiple air craft in DCS World. The Huey is the only one I am unable to 'dial in'. For a simple controller, It is pretty good. Just not finding good settings for the Huey. This is why I am willing to try someone else's axis /controller files or settings. Maybe someone else has had better luck.

I am having a bit of difficulty adjusting the sensitivity of my Joystick. Does anyone have a profile that will assist with the Huey? Mine is too sensitive. Try to creep and it jumps. {Pound sign was unnecessary Shift hold pressing 3D} If anyone has suggestions on how to set up the Axis Tune, this would be appreciated too. :joystick:

Thank-you, that is something in the area of what I am looking for. I think though if I find time, I am going to convert it to a spread sheet not a .jpeg The sad part is, I had come across this download and did not relize that is what I was looking for.

I have been looking high and low for the morse code's that accompany Airport ADF Frequencies and have not found one. I have found this PDF which I hopes to prove to be useful as it shows the radio frequencies but I am looking for the Morse Code's that is transmitted with the frequencies. Does anyone have a list? Thank-you. NavigationalAids.pdf

zSorry if this is in the wrong area, I didn't know if I should open a ticket from the digitalcombatsimulator.com or post a forum here and please inform/delete if inappropriate location. I am receiving "503 Service Temporarily Unavailable" with DCS_World_OpenBeta_1.5.0.4.5.208.37-11-1b.bin

I know you meant what you meant, and now know that you know I know that you know I know. :)

OH wow the Straits of Hormuz? That would be exciting. So can I expect Naval launched aircraft after DCS 2.0 of course? I would expect to see at least in the back ground the USS Dwight D Eisenhower and the French Charles de Gaulle? I could put WWII on hold for that.