stelios2000

please take a look here... it has some 7" , 8" , 9" and 10" lcd monitor really nice and CHEAP http://www.chinavasion.com/index.php/cName/home-audio-video-lcd-monitors-tv/

So i added these code lines warningIndicators = { [v11] = {0,163} } gIndicatorTables = {warningIndicators} in the siocconfig.lua file... but how will be the wiring ? #2 and #11 for the led? and that is all? it will work when it will flash from the game ? thanks stelios

I tryed to make a Led(lamp_EnginesStartValve) functioning as it is in the game... from this post http://forums.eagle.ru/showpost.php?p=766849&postcount=17 (thanks my friend) I saw that lamp_EnginesStartValve = 163 So at the Sioc Config menu I added Var 0011, name L_EngStartValv, Link IOCARD_OUT, Output 1 First i wonder where to wire the Led(with resistance 470 Ohm) Accordinng to Master Card manual the J2 Connector's pins are the outputs from 11 to 48 with pin #1 the +5Vcc and the pin #2 GND. So how will be the wiring? The one of the Led pins will go to the #11 and the other to #2 ??? Do i have to connect the #1 to +5V ?? Also in the C:\Program Files\Eagle Dynamics\Ka-50\Config\Export\SIOCConfig\siocconfig.lua Second what code line do i have to add? thanks in advance stelios

it works ........... :-)))))))))))))))))) this is the procedure for the on/off switches right ??? does it need anything else ? how about rotary/push buttons/toggle swiches/Led etc etc ? is it the same ? and what is the purpose of the programming that many peoples do here ? thankssssssssssssssssssss again stelios

I wasnt running the Sioc. So now i have this when i run it (clients running = 1) http://img376.imageshack.us/img376/3619/16896737.jpg and this is the switch we are trying to move it right ? http://img395.imageshack.us/img395/5553/18470115.jpg as far as the C:\Program Files\Eagle Dynamics\Ka-50\Temp\error.log please download it from this link http://rapidshare.com/files/293338115/Error.log.html Now at the export folder i have what you told me(erase the others) but it is freezing at the first screen that tells me to press the Pause/Break button to start. I read the error.log and the game couldnt find the class.lua file so i put it back. So in the export folder i have the export lua weaponstypeindicator.lua config.lua exportsupport.lua class.lua Siocconfig folder with siocconfig.lua file in it thanks stelios

you mean the C:\Program Files\Eagle Dynamics\Ka-50\Config\Export\Export.lua ??? As i saw...it exists....I then run B.S. but nothing happened here is the link to donwload and see my export.lua file http://rapidshare.com/files/293321321/Export.lua.html To remind you that i have downloaded and unzip your Export Folder (Export 0.92 beta) that you gave us in another post.

I did what you told me and I added the variable first... then save it as dcs_001.ssi and then change the sioc.ini file to CONFIG_FILE=.\dcs_001.ssi so i am getting this http://img119.imageshack.us/img119/823/76640016.jpg which i believe is correct thanks stelios

ok i did what you told me and i got from this http://img129.imageshack.us/img129/5562/46009214.jpg this http://img129.imageshack.us/img129/4586/80974172.jpg what is this IAS that changes anyway ? I understood the meaning of these Name=Test and the InS/Outs/# = 1 but why we chose Var Num=10 ??? Can we have Variable Num = any number ? thanks stelios

Ok i run opencockpits Sioc and have this http://img381.imageshack.us/img381/8196/25994084.jpg I then edit the C:\Program Files\IOCards\SIOC\sioc.ini (I think that square brackets [] includes remarks) so i found the http://img381.imageshack.us/img381/4992/87129017.jpg and change it to http://img381.imageshack.us/img381/5081/50563902.jpg I hope this is the line that you mention...How can i check if i did it right ? I run again the opencockpits Sioc and have the same look as before the change thanks again stelios

ok i did all these (i have parallel cable and connect it to J1 from Master to J1 to Expansion Card) I updated/changed the file C:\Program Files\IOCards\controlador.ini USB = yes MUSB = no i chose to wire the 1st pin with the 10th(GND) pin and the result is this for ON/OFF switch http://img169.imageshack.us/img169/1531/54878124.jpg http://img261.imageshack.us/img261/5738/51424837.jpg i did the same to all inputs and they work fine thanks stelios

Dear friend Oakes, I have master card and an expansion card so i connect them to my PC with USB instead of LPT. Can you please tell me everything you do with the master card (how you connect it, what files do you change etc etc every step) and write me just the code lines for these 2 switces i mention and which file do i have to change (only Export.lua ???) so i will try to understand all the procedure (and make them work...just these 2 switches) Also a question to make....i have read somewhere that it has over 700 (buttons/different situations???) the B.S. How you intend to cover all them? By using only Master cards?How many? If so then i have to buy some more myself. Thanks again and please forgive me my ignorance but i am confused... I am reading too many different post in many forums and i am confused. Some peoples they change not only the Export.lua file but also the clikabledata.lua file the import/export file (where are these????) and they write code lines(where???) Much confused.....Stelios

My dear Gadroc, Many things became more clearer after your reply.... I have some questions though: Firtst where do you write these code lines. I mean in which file. Second where inside the file? At the begining/middle/end ? Can i just make a file for only this (1st) switch and test it ? I have saw the Oakes files and they are pretty nice.It was hard for me to understand till now (without your help) I am looking forward for your help again Ps All the other stuff i did it(in my previous post) is it right? I mean do i have to run these 2 programms ? And if i have 2 or more USB key cards connected to my PC how different would be then the script ? thanks again stelios

Ok guys... it is time for me to give a try what i have read.... I am little confused so forgive me in advance. Lets say that i want to make work these two switches 1 & 2. http://img25.imageshack.us/img25/4158/43040539.jpg http://img98.imageshack.us/img98/4007/98465960.jpg I deliberately chose them to be in different panels. I have connected the Opencockpit Usb Key card (88 keys) http://www.opencockpits.com/catalog/usbkeys-card-p-53.html?cPath=21_35 I run IOCKeys program and i saw the Devide Number (2276). I then change/update the IOCKey.ini file with the correct Device Number. I connected at the 35/1 card pins the first On/Off switch and at the 35/8 card pins the second On/Off switch. I run the Opencockpits Sioc program and i am getting these two windows http://img99.imageshack.us/img99/4578/32714847.jpg I then go to Config/Export/Config.lua file and set EnableExportScript = true From here....i am a little confused. Where do i have to place the code for these two switches.... at the Config/Export/Config.lua file ???? Where exactly? And Can someone please write me the code for these JUST two switches? and some help for every code line please? thanks in advance stelios Ps I have only one PC (for Localhost), I have ALL the opencockpit cards (in case you tell me to use the master card) and i have the latest patch released 1.0.1

very nice !!!

how about these ??? http://www.chinavasion.com/index.php/cName/home-audio-video-lcd-monitors-tv/sort/b/

please write us the link to update it also. thanks

i dont know anything for this but i think it is expensive considering that with 50euros you can get 2 of these http://www.opencockpits.com/catalog/usbkeys-card-p-53.html?cPath=21_35 that has 88 keys each....so you get 176keys total (x2) much more than 55...

can you please show me how you did it ? cause with ON/OFF switch it is easy but with toggle im having a hard time thanks in advance stelios

is it possible to send me the g-code files of these panels cause i made a CnC router myself and wanna made them? thanks in advance stelios

thanksssssss

sorry for disturbing you again....yesterday it was my FIRST day that i run the BS. Yes .....i had it in preorder(English DVD) it was delivered to me months now but only yesterday i run it just to see some of the training videos. I have almost complete the wooden skeleton of my pit and i was trying to place the pots when i saw the videos. I realised that some levers dont need pots. Or am i wrong ? please look the photo and tell me.... Does 1&2 want pots or just an ON/OFF switch(with a spring) ? I saw that the 3 want ON/OFF switch only. How about 4 ??? I saw that it goes for 3 different positions... the one that posses and other 3. So it wants a (3+1=) 4-way linear switch ? pity i thought pots would be better. thanks in advance Ps so pots take only the centrall Joystic and the rudders right ?

speechless.................. i dont know what to say.....just a big...HUGE thank you.....again and again stelios

can you please tell us the dimensions of this panel and the one beneath this ? thanks stelios

your pit is............just fantastic..... can you please tell me the dimensions of 1 and 2 cause i searched a lot but these panels are the only that i dont have seen any dimensions ??? thanks again stelios