Jump to content

stelios2000

Members
  • Posts

    216
  • Joined

  • Last visited

Everything posted by stelios2000

  1. using this idea...... the author did this.... Has to be CRT..only this works only with CRT ....
  2. thanks..... you mean of course 18cm for the 3rd right ?
  3. [/url] can you please tell me the dimensions on 1,2 and 3 (in cm) ??? thank you very much indeed stelios
  4. somewhere else i saw that if you can send the data to an old CRT 14" monitor, then you place it upside down and using lens you "project" the data to a piece of glass(HUD). If i find this i will post it....looked good, pretty easy and cheap. The author was saying that the only problem was if the B.S. would have HUD data export..........
  5. thank you very much indeed
  6. awesome.......... can you please tell me the length of the collective stick (the visible side) not the whole length thanks
  7. can you please write me the Sioc code??? thanks stelios
  8. hi guys........... i finally manage to get a monochrome 9" old tv with AV option and RCA. Unfortunately my graphic card has only 2 HDMI (Asus 8600GTS)outputs and 1 S-Video. I've got a cable S-video to RCA but nothing happened. I have ordered a cable HDMI to RCA. If this isnt going to work do you think that a i have to buy a second graphic card (with RCA output) and placed it with my Asus card ??? thanks in advance stelios From Greece
  9. if you find any distributor that sells them please tell us cause i didnt find any
  10. http://forums.eagle.ru/showpost.php?p=680209&postcount=77
  11. will this be ok ? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=150346788555 but my Graphic card has only 2 HDMI (only) outputs how am i suppose to connect this ? thanks stelios Ps your cockpit turned to be awesome....
  12. http://yhst-27389313707334.stores.yahoo.net/thumbjoystick.html
  13. http://gr.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0516114
  14. i read somewhere that the program iocstepper.exe might have problem.... so i run opencockpitsSIOC and after the iocstepper.exe and the motor started to turn.... from .ini file i decrease/increase its speed but i couldn't use the optocoupler.... it was like it wasnt functioning.... also the data from the iocstepper.exe program from the right side that shows data from the motors are all zero... dont know what to do. anyway...... have to learn now how to use the opencockpitsSIOC program to make an easy instrument(compass ???) for the beggining.
  15. if you press on the image i sent you will zoom in and you will see all the setting of the .ini file i made. no i havent got the motors you sent me yet i will p.m. you when i get them. hope this week can you please tell me how can i determine which cable i will have to put in every pin of the card? i have found somewhere that i will have to use the multimeter in Ohms to compare the cables from the motor....so a 4wire motor with the 2 cables that have resistance are pin 1&2 and the other 2 are pin 3&4 am i correct ? stelios
  16. well.........things didnt go the way they should. i found opto-couplers and test the way you told me.... the Ohms does change when i pass through a needle between. So i connect it to the card and use a 4-wire stepper motor. I power the card with +5V.....i change the IOCStepper.ini and please take a look what i get with motor....still....not moving at all
  17. thank you all for your help.... I powered the card with +5V and changed the sioc.ini file but i didnt know that the card wanted the sensor(optical/magnetic) i will have to try it then..... i will post my experience from the card using the sensor thanks again my friend
  18. Hi all, i have bought Stepper Motor Cards from http://www.opencockpits.com/catalog/stepper-motors-card-p-49.html?cPath=21_33 and http://www.hobbycnc.com/ i read the manual and followed the instructions but..... i didnt manage to make them even ....turn. I took the motors from old good working printers, FAX and TELEX. I powered the cards from an old ATX PC power supply that gives +5V with 15A and +12V with 10A. i just connect the stepper motors to the card and run the software but........nothing happens anyone has any experience ? thanks in advance stelios from GREECE
  19. what is the size of these buttons ??? thanks in advance
  20. My Wife bought this Samsung 10,2" photo frame and it has usb connection to PC and works as a second monitor (tested). But i dont know the procedure to make it show only the view of the SHKVAL or the ABRIS http://www.samsung.com/hk_en/consumer/detail/spec.do?group=computersperipherals&type=photoframe&subtype=photoframe&model_cd=LP10CBMSB/XK
  21. thanks for the info.......... about the SHKVAL display....is it 9" TFT ??? and the right monitor will be 10" ??? how much did you pay for the 9" and i am thinking for a 9" & 10" digital frames. will these be good for this purpose? thanks again stelios
  22. can you please tell us where you bought these indicators(these 9 indicators are located on top left upper the round instrument place) ??? i am looking for them some time now...... your pit is great... hope mine lookes like yours....... thanks stelios
  23. i placed my pre-order too....
×
×
  • Create New...