blast

I should have to precise "during the flight". Because when adding TRIM during the flight, the FCS page doesnt reflect it. For example after bombing and you have to trim left, the FCS page doesnt display any information about the trim. Which is annoying because when all bombs are gone you need to reset trim as normal which is not possible obviously. The only way is to trim manually and check visually if the plane is balanced... Not cool.

Hi, Any idea on how to visualize the TRIM values and the possibility to reset it?

Hi guys, Is there a way to tune finely the autothrottle when it is activated, such as the one in the su33?

i guess the best is to not use snake eyes in CCIP since we don't have the cross reticle on the hud due to the very high speed required to drop them. Auto mode (aka CCRP) is the mode to use with snake eyes.

interesting.

Hi guys, I would like to know if you have issues with the CCIP and/or CCRP mode? From what i see, the CCRP with mk82 is not very accurate. And the rockets + canon reticle must be adjusted above the target to aim correctly. What is you experience with it?

Indeed, when releasing the parking breaks it is not possible to proceed with the INS alignment. The only way is to respawn in a new slot BUT, I noticed that INS alignment is not required in the current module version since it is not impacting the systems navigation. Can you confirm it?

All the commands are accessible with your keyboard. You need to bind it accordingly to your preferences. By the way, a hotas, even a cheap one, is highly recommended if you want to use DCS.

I agree but "TDC to HUD" makes me confused with the radar TDC. Thank you for your help.

Hi everyone, When using rockets, whatever the type of rocket: - In single mode, one press release half of them - In salve mode, one press release all of them Is there a way to set the number of rockets? What am i missing here?

Hi guys, I'm trying to use snake eyes in CCIP mode but it's nearly impossible or too dangerous to drop them. I dive on the target at 30° angle with a speed of ~450 knots but the launch authorization (= the small cross on the hud) appears too late. How do you manage MK82 snake eyes in CCIP?

yes it is, as said above : 1. To drop bombs/rockets we have to push the dedicated button on hotas and not the trigger (dedicated for air-air). So we need to bind it separately on our joystick. 2.To mark a target in CCRP (= auto mode), we have to push the TDC up on hotas (NOT the TDC to select air targets). Same, we have to bind it on our joystick. In my opinion these 2 points were not correctly explained both in manual or videos tutorials. On the other hand the others aspects are well explained.

I was indeed not using the correct TDC. It is bind now on hotas. Thank you for your help guys!

In the manual (page 92) it seems to be clear to mark a target but in the facts it is not: > Designating a waypoint location as the target as set on the HSI using the WPDSG option. -> This one i am able to do it > Flying to place the reticle pipper over the target and designate it with the Weapon Release Button -> not working. When pressing release button nothing happens. There is no marking > Setting the TDC to the HUD and slewing the TDC over the target and designating it by pressing the TDC switch -> Im not even sure to understand this one. I press TDC up (the TDC to select an air target) and nothing happens. My gosh, why is it such unclear to mark a target??

I was indeed pushing the trigger for air-air weapons and not the air-ground button. Then I'm able to drop in CCIP. But in auto mode (CCRP) bombs I don't understand how to mark targets then bombs are not dropped. Any idea?

Hi everyone, I read the manual + watched the video tutorial on how to use bombs in ccrp and ccip mode but i am still unable to drop them. I tried mk82 and mk82 snake eyes with different programs (auto, ccip) but nothing worked. Here is a screenshots of my storage: https://imgur.com/a/8ddL8P2 What am I missing?

hello everyone, I'm here to report an issue with the missile authorization and lock system with magic. For some reasons, i don't have the TIR authorization anymore on my hud when locking a target with the 530 but i can shoot them. Worse with the magics: i can't lock anymore with the magic slave or not. I'm not sure if i'm doing something wrong or if its a bug so i hope you can help me to figure out this. Thanks! PS: i know well the m2000 module (~2 years from now) but may be a new feature/behavior that i dont know yet has been added.

I finally solved the issue. Three days ago I performed two things: 1. I completely removed my antivirus Avira in order to let windows defender doing the job. 2. I removed a program called USB charger+ natively installed on my PC. I haven't tested DCS between these 2 steps then I'm not sure which one is involved into the issue, but i would bet it is the second one (the usb charger program). I have an Asus laptop (a good one), and natively Asus installed a couple of softwares on it. Some are useful and others are not and could cause tricky problems with DCS such as "inputs creations"... Finally, I suggest you check ALL the programs installed on your computer even the oldest one or the one that came natively with it. One of them should be the source of the problem. Also, I hope ED would make an option to disable the input creation during the game. It could be useful for many.

I finally solved the issue. Three days ago I performed two things: 1. I completely removed my antivirus Avira in order to let windows defender doing the job. 2. I removed a program called USB charger+ natively installed on my PC. I haven't tested DCS between these 2 steps then I'm not sure which one is involved into the issue, but i would bet it is the second one (the usb charger program). As I previously said I have an Asus laptop (a good one), and natively Asus installed a couple of softwares on it. Some are useful and others are not and could cause tricky problems with DCS such as "inputs creations"... I would like to mentioned again that when I had the issue, the tool 'USB log viewer' never detected USB disconnection. I also tried ALL the advises posted here but with no success. That's why this problem is very tricky. Finally, I suggest you check ALL the programs installed on your computer even the oldest one or the one that came natively with it. One of them should be the source of the problem. Also, I hope ED would make an option to disable the input creation during the game. It could be useful for many.

i dont know i just spam alt+enter like crazy because you know i like inputs creations :prop:

Yes you are right. But as i said previously: me and many others have no USB disconnection and has been confirmed monitoring with the usb log view tool. We can split this problem in at least 2 categories: those who experience usb disconnection and those who are not (like me and others). If the people without usb disruption experience the input creation issue as same as those who experience usb disconnection THEN we can conclude that the input creation issue is not related to an USB issue. If you switch between windows mode to full screen by pressing alt+enter it triggers all the input creation events. There is no reason to recreate inputs at that moment. I think the easiest for ED should be to give us the possibility to deactivate the automatic input creation. It could be something to modify in a config file such as boolean to false, and then everyone is happy.

When this thread was started, you answered that the issue was from a lose USB connection or a windows problem. Then many users have made all the possible test to manage the situation (read the entire thread if you didn't). And recently i also performed a test including the usb log viewer which confirmed that my usb devices NEVER get disconnected. I also did everything else possible but with no success. Also, why the input creation is triggered when pressing alt+enter? And why this problem is only happening with DCS and not with the others games i installed. Its not because you are not able to reproduce the bug that the problem doesn't exist. Have you ever experienced an issue with a software that the others users didn't have on their computer?? :doh: If there was only one guy experiencing this on earth, fine. But here we are not alone to experience that, and many others don't necessarily report the problem. May be they just say "ok fine, this game is not for my config i'm not going to spend my money in it". This is really happening.

Im running on windows 8.1 and im not concerned with usb sensitivity despite the input creation in DCS.

Again me and many others have no USB disconnexion and has been confirmed monitoring with the usb log view tool. As i said in a previous post here: We can split this problem in at least 2 categories: those who experience usb disconnection and those who are not (like me and others). If the people without usb disruption experience the input creation issue as same as those who experience usb disconnection THEN we can conclude that the input creation issue is not related to an USB issue. If you switch between windows mode to full screen by pressing alt+enter it triggers all the input creation events. There is no reason to recreate inputs at that moment.

Thank you very much for catching ED attention. Indeed, not everyone seems concerned about it. As someone said here, some players are not even aware about this problem thinking its a performance issue. But for those who are, we tried all the tricks we possibly could in windows, even buying usb ports for some users and so on, but nothing worked. And its really blocking us, its not a small lag but a complete freeze for very long seconds and every 10-20 min. Everything as already been well documented in the thread for more details. We hope ED will find a solution soon such as an option to deactivate the input creation during the game. TY