GafferDCS

Where is the security pin?

Flap indicator reads "Auto". No master cautions or green lights on the panel. Is there a way to reset the ADC? Yes I have tried speeding up and changing angle of attack. They just stay partially extended throughout the entire flight profile. 500 knots, light aircraft, 0 or -1 G, they stay partially extended. 250 knots, pull into an accelerated stall, same thing, they don't move. I can get them to go full up or full down by putting the gear down, or setting the thumb switch to "up" etc... (and the flap indicator reacts normally while they move) But every time I put the switch back in "auto" they just move to the partially extended setting and stay there. It always seems to happen after an extended climb with an external fuel tank. I get to altitude, level off and speed up.. and the flaps don't retract.

I have encountered this on multiple occasions and I think this is a glitch/problem with the F-5 Take off with a centerline tank and set flaps to auto before takeoff. Retract gear and Verify auto flaps are working by changing AoA/Speed and watching them automatically go from full deployed to fully retracted. After an extended, low airspeed (250-275 knots or so) climb with flaps in Auto, I find that the flaps will stick in a partially extended setting. I can blow the tank off, speed up and dive and the flaps stay partially extended. Pull several G's and they stay in the same position. Moving flaps up/down manually works. But in "AUTO" they stick partially extended. The flaps switch on the throttle is set to "Auto" and the flap lever on the lower left of the throttle is set to "thumb sw" Thoughts?

Do they respawn?

http://355thvfs.enjin.com/home This one is pretty laid back

In the A-10 Stone Shield campaign I am stuck on the mission titled "Suppression" Where you take out a retreating enemy column. Somewhere in the middle of the mission I always get a random message accompanied by the mission tone usually reserved for a mission failure (getting my plane blown up or what not). Message reads "GGGGGGRRRRRRRRGGGG' something like this I take out the column and the two helicopters and get a mission message saying objective completed, RTB. Nothing about hitting F10 to skip and complete mission. So I RTB with my wingman and follow him to parking. Park and shut down. No message in the menus to select complete. Exiting the mission using escape results in the mission counting as unsuccessful. I have flown and completed this mission twice with the same results. Latest version of 1.5.6

Just updated to 1.5.6 F5, load 2 AIM-9P and 275 gal centerline tank In any multiplayer server (I tried several) I get kicked out with a "connection timed out" message when I jettison the tank. Works fine until I want to blow the tank off. Select "all pylons" and when I hit the button to jettison I get instantenously kicked off. Never had any issues until updating to 1.5.6 today. Not sure if this is the proper forum to report a bug, if not please let me know.