stgchamby

So I reset the keyword database. No luck. I found the keyword that was duplicate 'my target' in the list. Deleted it. Did the 'Finish' process again and it works. Since the 'My target' came with the database and was a multipart, did I lose anything? STGChamby

@Hollywood Bought the Realistic ATC licence. Followed the directions to finish the key words. After I ctrl-a, delete and ctrl+v, I get an error message "The profile already contains spoken phrase 'my target'. Please choose a different one." I did not add 'my target'. How should I proceed? Thanks, STGChamby

Enjoying the increased frames in VR MP. The SC WIP is just that a WIP. Initial impressions are positive. Found MSAA mask in the VR tab. Can we get some detail on what it does and how to optimize it? TGP FLIR Looks great in both white and black hot. Performance using MAVFs is excellent. Some comms menu bugs happening in MP with CASE I being called by controllers but menu options are CASE II/III. Hard to line that up. Chamby

Any time DCS updates or sometimes when repaired, you need to remap the DCS path in the Config tab. This will stop your menu from flashing like that. Make sure and use the DCS path not the saved games path. Chamby

Figured it out.

Looking for some help on moving a profile with both my default and custom commands from my old computer to my new one. I think I have tried the obvious of export and import but my custom commands never show up on the new computer. Thanks in advance STGChamby

Looks like you are trying to create a custom command and the 'When I say' is already allocated to 'Confirm'...Choose a different 'When I say' term for the command you are creating. STGChamby

@Hollywood After the latest update, I'm getting errors that I haven't seen before. I went through the manual and made all the changes in the TX lines. I think I have everything setup correctly. The error I'm getting is: 8:48:46.450 Command 'inbound' is currently disabled for this session and was not executed. 8:48:46.448 Recognized : 'inbound' The word is recognized but not executed in the current session. The next odd part is that the error is not consistent. For example, on approach I called inbound. Everything worked fine. I need to go around and someone had landed in before my next approach. I called inbound again and got the error listed above. Several other examples when doing AAR or when on the carrier and trying to execute default commands. All my custom commands appear to be working. Any thoughts or have you seen this before? Thanks. STGChamby I am using the F/A-18 when this happens.

Have been trying to get this going for a week now. I have installed as directed numerous times. Will not be recognized by servers. Any help?

Looks like RN-24s are enabled for the MIG-21. The carrier keeps getting nuked.

@Hollywood Thanks for the update and fix. Soooooo much better not having 25% of the cockpit covered/obscured. Good update. STGChamby.

@Hollywood Still having this problem with no resolution found. Any help is appreciated.

Is it normal for information messages on the right side of the screen to pushed down to the bottom right while voice attack is active? If not, how is this prevented? I have tried to disable the comms menu in the config with no luck. Having messages a overlay on the top right of my cockpit instruments is a no go. I need them consistently in the upper right where they belong. Any help?

@Hollywood Noticed I am getting a bunch of extra stuff happening at VA startup. Tried the finish process and this time it works. Lost 256 keywords in the process. I was up to 1082 keywords and now down to 826. Is this planned?

@Hollywood_315 Yup, I know the process. I do it after each update. This time I get the error mentioned in my original post. Need to know how to find the duplicates. Tried pasting into notepad, but that's no good.

Duplicate commands error Afetr the last update, I tried to finish the keyword database process. After ctrl+V and pressing 'Ok', I get an error about duplicate commands. "Invalid multipart command. Multipart commands cannot contain duplicate entries. Please remove any duplicate entries." I have looked and cannot find these duplicate entries. I have reset the keyword database with no change. I have 13 FA-18 specific commands which did not throw the duplicate error on the previous updates. Is there a sure fire way to find the duplicates or is there something else I can do to get past the error? Thanks, ANON6-4 | Chamby

I have been working on low level bombing and have come across a problem with getting the snake eyes on target. My Settings: Mode: CCIP MFUZE: Nose EFUZE: INST Drag: RET QTY: 10 MULT: 1 INT: 320 ft This should give me 1 bomb every 320' for 2880'. I am using the abandoned X airfield on the Caucasus map. I make my approach at 500' and 511kts. When the + of the BFL crosses the threshold of the runway, I pickle the bombs for 10 pulses. When I pull up and out to watch the bombs hit, five of the ten start to impact ~1440' before the threshold and the rest hit the remaining ~1440' after the threshold. Is anyone else having this problem or I am doing something wrong? ANON6-4 | Chamby CCIP HIDRAGS MISS.trk

Thanks for the response Svend but page 136 contradicts what you are saying. The bombs should impact where the pipper pulses not the center of all ten. This seems to be a new thing as the bombs did not drop this way a few months ago when I was dropping them in BUDDY SPIKE. Even when you look at the YT vids from a few months ago, the bombs ripple and impact where the pipper pulses. Just want to know if others are seeing this before I put it under bug report.

I have been working on low level bombing and have come across a problem with getting the snake eyes on target. My Settings: Mode: CCIP MFUZE: Nose EFUZE: INST Drag: RET QTY: 10 MULT: 1 INT: 320 ft This should give me 1 bomb every 320' for 3200'. I am using the abandoned X airfield on the Caucasus map. I make my approach at 500' and 500kts. When the + of the BFL crosses the threshold of the runway, I pickle the bombs for 10 pulses. When I pull up and out to watch the bombs hit, five of the ten start to impact 1600' before the threshold and the rest hit the remaining 1600' after the threshold. Is anyone else having this problem or I am doing something wrong? ANON6-4 | Chamby

Tried the other server. Landed at both airfields and everything worked just fine. 94.130.23.93:10309 is the server that works great. ANON6-4 |Chamby

Will try on RED side and on the other server. I also had a squad mate try it. He had the same indications. ANON6-4 |Chamby

OK, did some trouble shooting today. New symptom is jester not responding to commands. I landed at Batumi about 5 mins after telling jester what to do several times. While I was on the ground I got flooded with numerous jester responses. Seems there is tremendous lag. Was only able to get the comms menu up on the ground after repeatedly pressing the "" button. Again, I think massive lag. Once the menu came up, there were no options to do anything except F12 to exit. I used my rearm/refuel key that I use to bypass the comms menu. I was able to refuel and rearm from that menu with ground crews responding normally. So what I am seeing is a massive script lag. All other movement such as A/C flying and missile employment is normal. ANON6-4 | Chamby

Here a change today. VAICOM recognizes the air start Tomcat but when I land at Batumi, VA recognizes the commands but returns there are "no ground crew recipients" to execute the rearm/refuel. ANON6-4 | Chamby

Does anyone have trouble or have had trouble using Voice Attack/VAICOM on this server? I cannot get the ground crew to do anything with VA enabled. ANON6-4 |Chamby

In VAICOM using the Lctrl+LALT+C GUI, go to the EX tab and uncheck the Enable box under AIRIO. Restart VA and DCS. Jester wheel will be back but you will not be able to voice control Jester anymore. ANON6-4 | Chamby