beczl

@Vekkinho: Some dirt and scratch add as requested. :-)

Hi, Ub-16's are available at the LockOnFiles and my site too. :-)

@ serj_3d Here you are. @Vekkinho Ok. I already work on it. :-) But it's quite difficult to me to make a good one. And the linked pics is amazing! Thanks.

Hi, B-8V20A 3D model is finished ( I hope so :-) ) Texture isn't the final! It's WIP. And UB-16-57UMP-73 too.

Ok I see. I'll fixed. :-)

Hi, @Coyote: Thanks your remark. I follow your remark and modified my B-8V20A. 1. not very precise general proportions of pod and its details Almost fixed. 2. handles from the rear are small Fixed. 3. walls of barrels are longer than needed Fixed. 4. walls of barrels are too thick Fixed. 5. not very correct geometry at the rear of pod, from the shorter side Almost fixed. 6. rather poor texture WIP. Thanks.

Hi, It's a Hungarian Airshow Mi-24D "Pickpecker". Now she's on the Aviation Museum on Szolnok (Hungary) http://www.repulomuzeum.hu/Leltar/Leltarfotok/Mi-24Dcs.htm http://www.albatros.iweb.hu/keret.cgi?/makettek/cikkek/csorike/csorike.htm And how was it made: http://www.jetfly.hu/rovatok/galeria/fotok/katonai/csorike/

Cool Mod. Thanks. REP inbound.

Thanks man! :pilotfly: B-8V20A available from my site now and it will be on the LockonFiles today. Other new model on the way. ATAL Dual Stinger launcher for OH-58D, AH-64D and UH-60A. Model & Texture finished. We figure out how to insert the game.

Thanks. Day by day I'll be better :smilewink:

Hi, You have to use 3DSMAx 7-8. Check the links below for the export plugin and the recommendation. http://forums.eagle.ru/showthread.php?t=18234 http://www.lockon-models.com http://lockon.co.uk/index.php?end_pos=545&scr=default〈=en All the best, beczl

Hi, Here you are.

Hi, Some new development.

I can't recognise any significant fps differencies when using this mod. Only +-1-2fps. I tested it when I fired FFAR salvo and three MLRS battery working together.

Hi, @Yuya6104 What do you mean "standard rocket pod"? B-20? The B-20 WIP. It'll be available mid of next week. @PythonOne Yes, but it's quite diffucult, because only one UB-32M1 rocket pod slot into both game, and we have at least four different UB-32 type pod. If I combined these pods only one package you won't choose between the four UB-32 type, the pack schould be contain only one type of this. But I working the soultion. :pilotfly:

Hi, All new model available from my site. http://beczl.tvn.hu Shoud be available on LockOnFiles tomorrow. Have fun!

It's amazing. I tested in the DCS: Black Shark. Works perfectly. Thank you.

Yes. the UB-32-57 heli version pod is finished too. The B-20 heli version pod, UB-16 pod, and GUV pod is WIP.

Hi, @Yuya6104 So I finished the optimization of all Rocket Pods and ODAB. It has a high detailed textures and LOD too. It'll be available today. @Migressor I'm already working the AIM-9X. The model finished the texturing in V1.0 phase. Test in progress by NRG-vampire. If the modell pass the test it'll be downloadable as soon as possible.

Thanks all. In the sim it'll be more detailed and awesome than you see in the WIP screens.

Hi, I optimized and set a LOD all of my model, but I've got a little problem. After set the LOD paarmeters in the LOMUtils then I try to export my model to LOM format, I have the following error: Export modul failure. I try to export my model on two different maschine and Max 7 and 8 too. I get same error message. So the error is probably my LOD settings. I set up the lomutils according the ED requirement: -Create LOD Dummy - Link all meshes to this dummy - set LOD dummy [LOD parameters] > [LOD Count] > 1 > [ranges (in meters] 25 - set LOD1 meshes > [LOD parameters] > [LOD Level] > 1 > http://beczl.tvn.hu/issue/01.jpg http://beczl.tvn.hu/issue/02.jpg http://beczl.tvn.hu/issue/03.jpg http://beczl.tvn.hu/issue/04.jpg If anybody could help me feel free to contact me. Thanks,

Hi, I optimized and set a LOD all of my model, but I've got a little problem. After set the LOD paarmeters in the LOMUtils then I try to export my model to LOM format, I have the following error: Export modul failure. I try to export my model on two different maschine and Max 7 and 8 too. I get same error message. So the error is probably my LOD settings. I set up the lomutils according the ED requirement: -Create LOD Dummy - Link all meshes to this dummy - set LOD dummy [LOD parameters] > [LOD Count] > 1 > [ranges (in meters] 25 - set LOD1 meshes > [LOD parameters] > [LOD Level] > 1 > http://beczl.tvn.hu/issue/01.jpg http://beczl.tvn.hu/issue/02.jpg http://beczl.tvn.hu/issue/03.jpg http://beczl.tvn.hu/issue/04.jpg If anybody could help me feel free to contact me. Thanks,

Hi, The GUV model almost finish. Now I working the model multi LOD and texturing the model too. I start to recreate and optimize (decrease poligon, and enhance texture detail) to my other rocket pods according Chizh remarks. I hope both of them will be finished till end of this week. :-) P.S.: Anybody know how to possible (which argument responsible for this) to assign a flash animation of the gunpod's muzzle in DCS:Black Shark? If it's possible, I'll try to animate the muzzle flash and the gun rotation too.

Hi, This GUV-8700 Gun Pod (9A624) and (9A669) had been developed for use on Mi-8/17, Mi-24/35, Ka-25/27/29 helicopters. The GUV-8700, has been listed as a weapons option for the Kamov Ka-50/Ka-52 attack helicopter family. (And used on the HuAF Mi-24D too) :-)

Hi, Thanks. Step by setp I hope I will better. 1.) The curent polygons of my modell is the following. UB-32A/57 33.492 UB-32M/57 33.226 UB-32A/73 28.720 B-8M1 18.731 B-13 7.902 ODAB-500 2.516 Now I already trying to reduce them, but these modells are very complex and I must have to lot of effort and time (and test) to this optimisation. 2.) LOD WIP :-) And finaly. My new WIP project. :-) GUV Gunpod for Helis. All the best, beczl