pet333r

Check if any additional software is't blocking Android > PC data transfer. Communication of this data is done via UDP, the default port 25070

If you receive data from DCS World but when you click in the application nothing happens, in most cases it is due to the wrong IP address of the computer given in the settings in DCS UFC. Send the screen from the settings in the application and the computer's IP (preferably from cmd> ipconfig) Also check that there are no typos in the given IP address in the DCS UFC (e.g. a comma instead of a dot or an unnecessary space, etc.)

Update the script, you must have a T-45.lua file in the "Modules" folder for everything to work

At the moment, version: 2 --------------------------------------------------------------------------- New version 1.0.2021.0508 avaible - T-45C: added UFC panel support - MFD: added support for T-45C Goshawk - M2000C INS: the module LCD data display has been updated to the latest version 2.7 - Ka-50: added fullscreen support - changed home screen graphic updated INS panel to work with the latest version of the M2000C module released in version 2.7, update the M2000C.lua file in the "Modules" folder in the script

Yes it will. Although a bit later because recently the priority was to update the INS panel so that it works with the modified version of M2000C in DCS 2.7 (it will require updating the M2000C.lua file in the Modules folder in the script, it is already available on Github)

I used to have a similar situation, I changed a bit in the graphics settings in DCS and additionally installed Reshade, before all that I had an average of 50-70 fps on three monitors, after that it was only 24-27fps. At first I didn't know what it was about because changing the settings in DCS to default and turning off Reshade did not help. Finally, I deleted the "fxo" folder from the DCS folder in Saved Games. DCS created new shader files for the new settings and it is back to normal.

No, leave the rest of these groups (devices 2, 3, 4) by default. Got your script updated? The latest version has changed quite a lot and also requires updating the Config.lua file (here I can see that you have an "older" version of this file, in the newer version there are some additional options in it). If you use automatic script update, all files are updated (except for the Config.lua file, so as not to overwrite user settings and IP addresses in this file) Do you have DCS on a regular HDD or SSD? When I changed from HDD to SSD, I eliminated stuttering completely

Do you use any additional scripts? There is a Config.lua file in the script folder, how do you have IP addresses set in it? In addition, the script sends the data it receives from the DCS and is sent only when it is necessary and nothing is read from the disk, which often reading from disk causes stuttering. I do not know which version of DCS you have, but the current version 2.7 is still heavily bugged, I have already seen the "crash" window several dozen times (all within just a few days)

The application does not have such an impact on DCS, it is mainly responsible for data reception. Stuttering must be caused by something else

What exactly? I'll check it

This problem currently only occurs in the OpenBeta version 2.7. I checked the files in the M2000C and it turns out that Razbam changed a lot of code in the module, so it is not displayed on this panel. Of course it will be changed and updated in the application but it will need to wait until the stable version goes to 2.7 (then everything will be ok on both versions)

New version 1.0.2021.0425 avaible - fixed a bug when opening panels on some few hardware devices - M2000C: fixed bug on warning panel when 5mn O2 warning occurred This update mainly fixes an issue that has occurred on several devices and prevents the panels from starting

This is because you probably already have the script installed. Check the main file Export.lua in the Scripts folder, you may have the same entry several times to run the script. If you want to update the script, the update_pw-dev_script.bat file is in the folder with it

If you use automatic update, it downloads all files (except Config.lua) so as not to change it and not accidentally delete user configuration with IP addresses Therefore, this update requires additional "manual" updating and replacement of the Config.lua file

Have you also updated your Config.lua file? This is necessary because it contains several additional options responsible for displaying the position on the map

You can display the position on the map with each supported module in the application (you can even use it with other modules that are not supported in the app, ex. Mig-21), it does not matter whether there is a map in Tomcat or not. Only for the time being the position for machines with FC3 is not displayed (but with time I will probably add it as well) and... You're right, I'm trying to get closer to better radar and position handling

New version 1.0.2021.0416 available - added a panel for displaying the position on the map - AJS37: added warnings panels - M2000C INS: added M91/M92/M93/PRET/ALN/MIP/N.DEG/SEC/UNI lights indicators - changed graphics of "old" knobs to newer ones - A-10C: fixed knobs on the UHF panel to prevent setting individual values above 9 - fixed saving of default settings for MFCD panel in JF-17 - F/A-18C: ALR67 fixed showing text on some devices - F16C: increased Data Control Switch click location - M2000C: added fullscreen support IMPORTANT! update the entire script, including the Config.lua file, which contains the IP addresses of your devices, this file contains additional options required for the correct display of positions on Google maps (you can also disable the transmission of navigation data to individual devices by changing the settings (Config.lua file): ExportScript.Config.Export1Nav ExportScript.Config.Export2Nav ExportScript.Config.Export3Nav ExportScript.Config.Export4Nav example: if you are displaying the map on only one device it is enough to set one of these values to "true", the others may be "false" (navigation data will not be sent to this device, less data transferred -> better performance). By default, all these 4 settings are set to "true"

Try reinstalling the script, maybe there was some error in the files while it was running

As for changing panels with buttons, check how it will work, I tried to make it sensibly not to cover other buttons/switches and not to be too large/small, but with such a huge number of different devices (screen proportions, resolutions, etc.), all combinations are not can be checked I try to improve performance wherever possible, in the application I improve the mechanisms of "drawing" panels on the screen so that everything loads faster and uses only as much memory as is needed. Older hardware will always be slower no matter if it is this application or another. I do not know if you have a PC connected to the router with an Ethernet cable, but if not, it is worth doing because at the moment only the new Wifi 6 AX standard can be comparable in speed to 1Gb/s Ethernet. And the faster the connection PC > router, the lower the delay between next devices in the network (PC <> router <> Android) In addition, I plan to make minor changes to the script itself, this should also help a bit (of course, it will be more noticeable on older equipment)

New version 1.0.2021.0319 available - A-10C CDU: increased panel performance - added F-5E Warnings panel - JF-17: added AAP (Avionics Activation Panel) - JF-17 UFCP: changed panel graphics - app: added the option to swipe panels with buttons (choice between gestures / buttons in settings) - app: changed some others graphics The update may additionally inform about permission to access the location, I'm working on something new, some more information will be soon ...

There will be even more of them, heh[emoji1]

New version 1.0.2021.0305 avaible - F/A-18C: added right console (ELEC / ECS / INTR LT) - F/A-18C: changed UFC graphics - M2000C INS: increased panel performance - M2000C INS: fixed displaying data on LCD's - M2000C PCA: fixed displaying data on 2nd top LCD

Check if the IP address of the device (tablet) matches the one given for it in the Config.lua file (it is possible that the router assigned a different address to it or it may be a typo in the given address)

Sure you can, any configuration

New version 1.0.2021.0219 avaible - A-10C: added UHF radio panel - A-10C: UFC panel performance increased - F-16C: added UHF radio panel - AV8BNA: fixed COMM 1 & 2 knobs - AV8BNA / F/A-18C: fixed displaying data on LCD's - F/A-18C: fixed COMM 1 & 2 knobs