RightStuff
-
Posts
1498 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by RightStuff
-
-
On 1/9/2024 at 5:38 AM, Harley said:
I'm going to dig up this thread to attempt to fish for relevant measurements. There is very little available, and it's vague what does come up. Some inferences can be made, but cutting up an e pensive sheet of anything with unsure measurements really is troublesome. I've printed the NATOPS pages at 400%, and it looks close, but I can't be certain. The winwing panels don't spec like this, either. We really are in some uncharted territory.
Any news on some reliable info for this? I was watching this thread:
https://simhq.com/forum/ubbthreads.php/topics/3351156/1
But it is not for measurements. The hornetpits.org website has yet to respond to my requests to join their forums, also. There has to be a way to assure some of this before wasting material.
Have you taken a look at http://openhornet.com ?
-
2
-
-
As Windows rearranges the Winwing MFDs after each reboot by its own sorting, this tools helps to restore the personal layout faster:
https://www.nirsoft.net/utils/multi_monitor_tool.html
-
2
-
-
On 6/4/2023 at 3:04 PM, Sprool said:
As a work-round I can program the location of the targets then switch to FLIR and use TOO mode but then I lose the ability to ripple off up to 4 JDAM's on 4 close targets.
You can ripple 4 JDAMs in TOO.
As every TOO can store a position for each weapon station, you can preprogram 8 positions (4 for TOO1 and 4 for TOO2):
(Default) WPN station 8, switch it to TOO1, select your WP, TXDSG,
step WPN to station 2, switch it to TOO1, select your WP, TXDSG,
step WPN to station 7, .... (rinse and repeat)After finishing this this, change quantity: box all 4 stations.
Make your run.
Attention:
QTY has to be deselected (unboxed) for all stations before assigning them WPs as TOO!
Otherwise you will overwrite the waypiont on the previous station and all stations have the same coordinates. -
-
Similar to Arduino, but other chip: You might want to take a look at FreeJoy
https://github.com/FreeJoy-Team/FreeJoy
-
What about these ones:
https://www.aliexpress.com/item/32819715560.htmlCan they be used with MMJoy oder FreeJoy?
-
necro-bump…
Since a few days this behavior is back again.
How can I get rid of the advert on the bottom?
It looks like it is not controlled by a cookie.
-
Picture is wrong with default to WP09 while being in ATK. Should be TG and TGxx.
-
On 3/23/2022 at 10:41 PM, Devrim said:
Apache is another love for all of us. We've waited for it for years, and almost 13 years. Finally we get it.
Just 13?
LB2 up to now is roughly 25 years, I assume.
Those were the days…
-
Hi Red Dog,
you might wanna try this solution? It‘s just a LUA-Edit.
-
1
-
-
Try this one…
-
1
-
-
May I post a headsup to my solution just using some LUA-Editing?
Sure, if anyone really wants to built it with hardware, this won‘t help.
-
Yes, contact is closed, when pushed and you can pull it to OFF (open the contact) - like we do it in the Hornet.
-
I used these ones:
https://aliexpress.com/item/32917612962.html
Sure, they will not pop out, but they can be used as a 'pull switch'.
-
Maybe you can use this as the basic design and expand it to your needs:
-
1
-
-
Import STL in F360.
Then right click on the body on the tree to the left.
Function: Mesh to Brep -> New Component.
Volià: Editable 3D object.
Depending on the unit of the source model and your currently active units you may have to scale the imported or new created body.
-
ok. Sounds good!
Thank you for your fast answer.
-
On 3/12/2021 at 9:48 PM, SkyJunky said:
Good catch!
But it looks like that stepper does not have a 'reset pin'.
How did you manage it to rset the needles before a new startup sequence?
Just by coding?
-
DED/PFL has 5 lines...
You may want so consider another approach using an OLED?
Example: https://scoptronics.com/products/oled-displays/3-2-inch-oled-display/
-
Oh? Ok... I'll give it a try.
Up 'til now I thought F18 can only manage 2 targets in TWS.
Thx!
-
Simultaneous guidance of 6 missiles to 6 targets was a procurement requirement for F-14, F-15, F-16, and F-18. Don't say "no" it's both missiles and targets.
How would you achieve that in our F18 as we only have L&S and DT2?
Seems that with the TWS of a F16 it could be done, but 'we' in F18? No idea...
-
If any display has HSI, SA or EWR visible and is SOI:
SCS towards that display should cycle through HSI, SA, EWS.
Currently SCS cycles only through HSI and SA.
-
Go with the AMPCD (F18].
What is missing can (mostly) be put into the display frame.
And by using Helios you can program a kind of menu for this display:
Depending on the pressed OSB you can bring up different gauges or other things which won't fit anywhere else.
Or mimic the CPD of the F16 Blk 60.
That way you'll have a suitable display for Ka50 ABRIS - if that is of interest for you:
https://www.ainonline.com/sites/default/files/uploads/2014/08/webelbit-f-16-upgrades.jpg
-
I tried these from multiple sources, but could not get them working at all, which is a shame as from what I read they are set up better for the X27 steppers
Les
oof.. sounds not promising... :cry:
Another chip a buddy suggested is the VID66-06.
https://guy.carpenter.id.au/gaugette/resources/vid/2009111391612_VID6606%20manual%20060927.pdf
May the same like the AX1201728SG, just with another label.
But maybe worth a try.
F/A-18 Hornet panels
in Home Cockpits
Posted
Indeed, many angles to master. lol…
It absolutely depends on which level you want to build your pit. Sure, OpenHornet is ‚HiFi‘ , but generally it gives you a good idea of parts and relations. The instrument panels are great templates! Just print them 3D and put them on a board. Easy way.
The Electronics are hard to master and - to be honest - I have some headache with their solution. So I‘m going not this way and will chose either FreeJoy or LeoBodnar for buttons and switches. Because of VR, Output (LED, Screens) is currently not of interest for me. That might change in the future. At least just for eyecandiness and though I focus first on structure and inputs.
Good luck, buddy!