Xthedarkknight99x

I can try the tray tool again. I just had not installed it since the reformat which broke all the normal stuff I use. The thing with my system is I see about a 50% use on the gpu and a 30 percent use on the cpu. The reason I find this to be important is because it feels as though asw is breaking. I press cntrl 3 to set asw on at 45 and I will seemly have some fps drops below 45 that is when the jutter and ghosting really hit hard. At this point I'm just laying my troubles out there because it might help someone. When I couldn't be helped.

My situation has improved by raising the trees and preload. I still get the ghosting but I just force asw on at the start of the flight. Seems to help. I have 2 500gig ssd's and I had installed dcs on both to determine if either of the drives needed to be replaced. During this event I also tried clearing the meta shaders and fxo.. So for me it didnt help unfortunately. Once I tried everything else.. the format was the last try. I'm glad this threat is helping those who need help.

With the settings bignewy posted I still to get the ghosting distorted blurred vision effect but its far more reduced. I Found myself turning everything down I think the major effects where the amount of trees and preload radius. Will do more testing but it seems like its a lot worse in the f14 than it is in the f16.

Not sure I can get a video of it as its happening within the headset. The best way I can explain it is that it looks like there is a left over imagine after the primary image. It also manifest a lot when looking at the tree's. And BIGNEWY thanks for stopping in and lending me some guidance.

You would think the issue is with my system.. but I have tried everything as I listed in the original post. Even to the effect that I dont experience the ghosting with beat saber. Yeah I realize that beat saber and dcs are two different things however a broken system should be broken throughout all the systems usage. This isnt a fluke. its a repeatable occurrence. I'm super glad that others are not having the issue but I certainly am. To add more trouble shooting information for those who want to help. I just flew around in the f14 for roughly 5 or 10 minutes. This is a stand alone mission with some reds and some blue and I start in the air. I start of by heading to ground level so that I can make passes over the trees. No ghosting to be seen. I continue to fly and it all look ok. Dcs stutters for a moment and all seems well.. Then the perma stutter/ghosting kicks in. Now everything I fly over makes me sick.

I'll try that however from what I understand over 1.7 really doesn't help at all

I will Def try a new install oculus and other planes. Because I was so desperate I reinstalled windows and formatted all my drives but my storage drive. So basically it's all fresh. But it's worth trying anything at this point. Damn Its sad I feel freaking helpless. But I just wanna fly and not get sick.

Starting a couple of days ago I began to have way worse ghosting than I noticed before. And as I posted on another post this begun giving me motion sickness. I noticed it a bit in the f16 first but when I reverted back to flying the f14 I noticed it was present there. I had this issue before but it seem to be tolerable and nothing anyone seem to suggest or report seem to help my situation. So here is where I stand at present. horrific ghosting occurs the moment I load the sim. If I press cntrl 1 to turn off asw.. It just makes it worse. if I press cntrl 2 it seems to have no effect that I can tell. Pressing cntrl 3 nets some results for a bit. The ghosting is minimized and I can look around without getting sick. Here is were it gets worse for me. After a few minutes of flight The ghosting will appear on the tree's. It almost looks like a slide show or like the trees are being dragged and popping for into the next location. And this is what makes flying hard. Trying to fly a low levels with this apparent jutter or ghosting whatever you wanna call it makes me sick to my stomach. Now on to the things that I've tried to do to fix it. original set pixel density to 1.0 and lower. selected the low option for dcs settings and I still get the ghosting/jutter I've tried new drivers and old drivers. Tried removing all monitoring programs such as msi afterburner or hwinfo. I've added and removed overclocks from both the gpu and cpu . I've used Process lasso of and on. I've checked my temps all which are within range of normal. I've tried every port on my motherboard including buying a inatek usb card. I've done a repair/reinstall of dcs and the Oculus software. I've checked ram for performance differences Removed my multi monitor setup. Turned on xmp profiles and turned it off. And last ditch as of writing this I have reinstalled windows version 1909 The hardware that I am working with is as follows. i7 8700k 4.6ghz 32 gigs of 3200 ram 500 Samsung evo ssdsx2 4tb hdd Msi gaming x trio 2080ti. Most of this parts are a year old or less. They also run fine when not using Vr. I'm pretty much at a loss for words and pretty bummed that I can't fly. I hope that someone might find some words of wisdom because I am running out of ideas. Helppppppp

System specs 8700k clocked at 4.6ghz 32gigs 3200 ram Dcs installed on SSD and 2080ti I get so much juttering and ghosting now that things have become literally unplayable. Ive never had moition sickness when Iracing or Dcs and now I can barely make it a few minutes before I feel sick as a dog. So till I can get this fixed. I can't fly. Ive literally tried almost everything last thing is a inatek pci usb card which will get here today. Currently trying to roll back to oculus 1.43 to see if that helps.

Hey guys, wanted to check in. Long day at work and unfortunately its harder for me to meet up during the week. More likely on a Friday through Sunday I am US Western time. So after reading the comments there are somethings I was able to identify. I have not been giving myself enough time when the wings are folder to trim out. The other thing I noticed is that I wasn't slowing down enough. ( noticed that about 200 knots i start to feel very uncomfortable with the pitch of the aircraft like I was going to fall out of the sky.) Things that I want to practice. Banking angles. Gear down flaps down around the break. Thanks for the help and the offers for assistance and live guideance

I've heard of using the AOA instead of the hud. Is there a reason why the hud would be different then the AoA indexer ? DLC does get used and unfortunately that is when I fall out of the sky. The other Issue I find is getting lined up with the run way. I've read that its a 45 to 60 degree bank. Is that right ? When doing a case one how far to the right of the run way or carrier should I be?

Any mentors or people willing to plan a time to hangout with me and possibly tell me how I can fix what I am doing wrong? So I'm having major issues getting the F14 on the ground properly. This is something I want to do. The idea here is that I will be able land properly on land and then on the carrier. I've watched so many videos good and bad and try to mimic in and I fail. I've basically watched every video I could find on the pilot seat. I've practiced getting aoa while not landing. I can get the aircraft on AOA while I am not trying to land but the minute I try for a case one. It goes to hell. Things that get me. Getting on speed with the E bracket. I adjust the trim add and remove power but it never seems to want to come down. I'm always chasing it away. fighting this effect causes me to gain altitude randomly or get what I know as the wobbles and fall out of the sky. I generally fly everyday.. and while not focused on landing I like bringing her back. I've learned more about this aircraft than I ever did with the F18. And I dont wanna give up. I am super grateful for the help because I love this as much as everyone else and dont want to give up.

Thank you Canadianbaken and lunatic fringe. unfortunately I don't have a back ground in aviation but I was able to look up the standby attitude indicator and locate the degree markers. Thanks for the guidance.

So I'm having a hard with my case 1 recovery. One of the major issues I'm having is determining bank angle. I flew the f18 for a bit and it has markers for bank angle. Is there something in the tomcat to which I can use to determine the bank angle I am looking for? In guides and manual I see 40 to 60 degrees. But other than guessing I have no idea how to make sure I am spot on Any help is always appreciated.

Resolved

Yeah, the ghosting is present for me when just looking at cockpit items. I haven't really done anything at night so this is mostly sunny clear sky's situations.

Recently I been experiencing what i feel is an insane amount of ghosting. At first I thought I was crazy and but when I move my head everything blurs so much its abnormal. I didn't experience this with the rift s in Iracing or dcs until very recently. Things I have done to trouble shoot the issue. Install dcs on my primary SSD. Vs being on my secondary SSD. Turn graphic settings way down. This seems like the only time It doesnt happen but the picture is so blurry its hard to tell. Reformatted and reinstalled windows. Full up to date. No anti virus installed yet. Tried it with and with out MSI after burner made no difference at all. I tried with the oulus debugging tool and without. Turning asw off made no difference either. Chrome, Firefox, Oculus and DCS are installed. making this a pretty bare setup. now for the specs. Intel I7 8700k Stock speeds right now. Usually overclocked to 4.8 under a Noctua NH-D15 cooler. 32gigs of DDR 4 3200 memory Rtx 2080ti gaming x trio. Overclocked and non overclocked. x2 500 gig samsung evo 840s Msi z370 motherboard. Ive tried it in 3.1 ports 3.0 ports and everything in between. I for the life of me can't figure out why its behaving this way. The oldest part in this computer is the powersupply. However it seems to muscle through everything just fine. Big screen looks fine. So really I am not sure whats going on. Usually when I put this much detail into a post I dont get much help. So I hope there is some guidance out there.