BravoYankee4 Posted January 14, 2016 Share Posted January 14, 2016 I am very much enjoying the HawgTouch (v1.6) application but there are some issues with the MIG-21 profile. Perhaps this is WIP and will be fixed eventually, perhaps it is a bug? KPP None of the RSBN or PRMG needles are operational. Neither of the K & T flags are showing. NPP Erratic movement of the direction needle. Localizer and glide slope needles arent moving either. Break pressure gauge No reaction what so ever. So, is this just me, or something broken/not imlemented yet? Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 15, 2016 Author Share Posted January 15, 2016 Is there anyone else besides me that actually are using Hawgtouch and the MIG-21 profile? Link to comment Share on other sites More sharing options...
sobe Posted January 16, 2016 Share Posted January 16, 2016 I am not but the developer of HT is looking into this issue as I sent him a copy of your post. See below: MiG21Bis HSI ID DCS-ExportID --------------------------------------- 1 heading 111 2 requiredHeading 68 3 bearingNeedle 590 4 warningFlagG 588 5 warningFlagK 587 6 glide 0 7 side 0 Data packages from DCS: ID: 1 2 3 4 5 6 7 ------------------- 17:37:25.510 Update gauge - Ikarus.MIG21_HSI - Package: 0; 0;0;0;0;0;0 17:37:25.539 Update gauge - Ikarus.MIG21_HSI - Package: 0.3; 0;0;0;0;0;0 17:37:25.702 Update gauge - Ikarus.MIG21_HSI - Package: 0.3; 1;0;0;0;0;0 17:37:28.995 Update gauge - Ikarus.MIG21_HSI - Package: 0.3;0.9;0;0;0;0;0 17:37:29.701 Update gauge - Ikarus.MIG21_HSI - Package: 0.2;0.9;0;0;0;0;0 17:37:30.996 Update gauge - Ikarus.MIG21_HSI - Package: 0.2;0.8;0;0;0;0;0 In the moment, we are not getting datas for the IDs 3 to 5 and we have not found the DCS-ExportIDs for the IDs 6 and 7. Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 16, 2016 Author Share Posted January 16, 2016 Ok, thanks for helping me with this. I really appreciate that :) Link to comment Share on other sites More sharing options...
McMicha Posted January 17, 2016 Share Posted January 17, 2016 Hello BravoYankee4, can you help me with a bug report? What needles and display incorrectly or not work? Please list the numbers and describe the problem! Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" DCS ExportScript D.A.C. DCS to Arcaze Communicator Ikarus a new Virtual Cockpit Software Deutscher Forums Thread English Forums Thread Hard/Software: AMD Ryzen 7 1800X, 32 GiB RAM, extra SSD for Windows 10 and DCS World, AMD Vega Frontier Edition with 16 GiB VRAM Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 17, 2016 Author Share Posted January 17, 2016 Thanks for replying McMicha. This behavior is when flying the standard Navigation training mission. Haven't experimentet with my own missions yet. KKP 2 : PRMG localizer needles (yellow in sim and white in HT) - Not moving 4 : "K" flag - Not showing 5 : "T" flag - Not showing 6 : RSBN/PRMG directional neddles (yellow cross in the middle) - Not moving NPP 4, 7 : Glide slope, localizer needles (white cross in the middle) - Not moving 9 : NDB/RSBN direction needle (Yellow in HT, white in sim) - Not synchronized with 3D cockpit The screenshot is showing both sim and HT instruments at the exact same time. Link to comment Share on other sites More sharing options...
McMicha Posted January 18, 2016 Share Posted January 18, 2016 Hello BravoYankee4, can you help me to find the correct argument numbers for the missing signals? The corresponding file is "..\Eagle Dynamics\DCS World\Mods\aircraft\MIG-21BIS\Cockpit\mainpanel_init.lua" I search the XXXX.arg_number = YYY.... Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" DCS ExportScript D.A.C. DCS to Arcaze Communicator Ikarus a new Virtual Cockpit Software Deutscher Forums Thread English Forums Thread Hard/Software: AMD Ryzen 7 1800X, 32 GiB RAM, extra SSD for Windows 10 and DCS World, AMD Vega Frontier Edition with 16 GiB VRAM Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 21, 2016 Author Share Posted January 21, 2016 Here are extracts from hat file that I believe is relevant. --ALCOHOL, COMPRESSED_AIR other similar stuff == == == == == == == == == == == == == == == == == == == == == == == == COMPRESSED_AIR_main = CreateGauge("parameter") COMPRESSED_AIR_main.parameter_name = "COMPRESSED_AIR_main" COMPRESSED_AIR_main.arg_number = 413 COMPRESSED_AIR_main.input = { 0.0, 130 } COMPRESSED_AIR_main.output = { 0.0, 1.0 } COMPRESSED_AIR_aux = CreateGauge("parameter") COMPRESSED_AIR_aux.parameter_name = "COMPRESSED_AIR_aux" COMPRESSED_AIR_aux.arg_number = 414 COMPRESSED_AIR_aux.input = { 0.0, 130 } COMPRESSED_AIR_aux.output = { 0.0, 1.0 } --/N/ KSI subgroup (NPP) ------------------------------------------------------------------------------------------------------------------------- KSI_course_indicator = CreateGauge("parameter") KSI_course_indicator.parameter_name = "KSI_course_indicator" KSI_course_indicator.arg_number = 111 KSI_course_indicator.input = { 0.0, math.pi * 2.0 } KSI_course_indicator.output = { 0.0, 1.0} KSI_course_set_needle = CreateGauge("parameter") KSI_course_set_needle.parameter_name = "KSI_course_set_needle" KSI_course_set_needle.arg_number = 68 KSI_course_set_needle.input = { 0.0, math.pi * 2.0 } KSI_course_set_needle.output = { 0.0, 1.0 } -- RSBN subgroup ------------------------------------------------------------------------------------------------------------------------- RSBN_NPP_kurs_blinker = CreateGauge("parameter") RSBN_NPP_kurs_blinker.parameter_name = "RSBN_NPP_kurs_blinker" RSBN_NPP_kurs_blinker.arg_number = 587 RSBN_NPP_kurs_blinker.input = { 0.0, 1.0 } RSBN_NPP_kurs_blinker.output = { 0.0, 1.0 } RSBN_NPP_glisada_blinker = CreateGauge("parameter") RSBN_NPP_glisada_blinker.parameter_name = "RSBN_NPP_glisada_blinker" RSBN_NPP_glisada_blinker.arg_number = 588 RSBN_NPP_glisada_blinker.input = { 0.0, 1.0 } RSBN_NPP_glisada_blinker.output = { 0.0, 1.0 } RSBN_NPP_kurs_needle = CreateGauge("parameter") RSBN_NPP_kurs_needle.parameter_name = "RSBN_NPP_kurs_needle" RSBN_NPP_kurs_needle.arg_number = 590 RSBN_NPP_kurs_needle.input = { -1.0, 1.0 } RSBN_NPP_kurs_needle.output = { -1.0, 1.0 } RSBN_NPP_glisada_needle = CreateGauge("parameter") RSBN_NPP_glisada_needle.parameter_name = "RSBN_NPP_glisada_needle" RSBN_NPP_glisada_needle.arg_number = 589 RSBN_NPP_glisada_needle.input = { -1.0, 1.0 } RSBN_NPP_glisada_needle.output = { -1.0, 1.0 } RSBN_KPP_kren_blinker = CreateGauge("parameter") RSBN_KPP_kren_blinker.parameter_name = "RSBN_KPP_kren_blinker" RSBN_KPP_kren_blinker.arg_number = 567 RSBN_KPP_kren_blinker.input = { 0.0, 1.0 } RSBN_KPP_kren_blinker.output = { 0.0, 1.0 } RSBN_KPP_tangaz_blinker = CreateGauge("parameter") RSBN_KPP_tangaz_blinker.parameter_name = "RSBN_KPP_tangaz_blinker" RSBN_KPP_tangaz_blinker.arg_number = 568 RSBN_KPP_tangaz_blinker.input = { 0.0, 1.0 } RSBN_KPP_tangaz_blinker.output = { 0.0, 1.0 } RSBN_KPP_kurs_director = CreateGauge("parameter") RSBN_KPP_kurs_director.parameter_name = "RSBN_KPP_kurs_director" RSBN_KPP_kurs_director.arg_number = 565 RSBN_KPP_kurs_director.input = { -1.0, 1.0 } RSBN_KPP_kurs_director.output = { -1.0, 1.0 } RSBN_KPP_glisada_director = CreateGauge("parameter") RSBN_KPP_glisada_director.parameter_name = "RSBN_KPP_glisada_director" RSBN_KPP_glisada_director.arg_number = 566 RSBN_KPP_glisada_director.input = { -1.0, 1.0 } RSBN_KPP_glisada_director.output = { -1.0, 1.0 } --/N/ ARK subgroup ------------------------------------------------------------------------------------------------------------------------- ARK_RSBN_needle = CreateGauge("parameter") ARK_RSBN_needle.parameter_name = "ARK_RSBN_needle" ARK_RSBN_needle.arg_number = 36 ARK_RSBN_needle.input = { 0.0, math.pi * 2.0 } ARK_RSBN_needle.output = { 0.0, 1.0 } Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 21, 2016 Author Share Posted January 21, 2016 Another thing missing in the HT MIG-21 profile is the "1000" indicator in the IAS instrument. However I can't find anything in the lua file, but that should be easy to implement anyway perhaps (if IAS > 1000 then 1kflag = true). -- INSTRUMENTS == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == == IAS_indicator = CreateGauge("parameter") IAS_indicator.parameter_name = "IAS_indicator" IAS_indicator.arg_number = 100 -- 0 300 600 900 1199 1500 2000 IAS_indicator.input = { 0.0, 83.33, 166.67, 250.0, 333.34, 416.67, 555.55 } IAS_indicator.output = { 0.0, 0.15, 0.30, 0.45, 0.60, 0.75, 1.0 } TAS_indicator = CreateGauge("parameter") TAS_indicator.parameter_name = "TAS_indicator" TAS_indicator.arg_number = 101 --TAS_indicator.input = { 0.0, 167.0, 278.0, 417.0, 555.0, 833.0 } TAS_indicator.input = { 0.0, 166.0, 273.0, 413.0, 551.0, 829.0 } TAS_indicator.output = { 0.0, 0.20, 0.309, 0.49, 0.67, 1.00 } M_indicator = CreateGauge("parameter") M_indicator.parameter_name = "M_indicator" M_indicator.arg_number = 102 M_indicator.input = { 0.0, 0.6, 1.0, 1.8, 2.0, 3.0 } M_indicator.output = { 0.0, 0.202, 0.312, 0.6, 0.66, 1.00 } Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 24, 2016 Author Share Posted January 24, 2016 Just tried the new version (http://forums.eagle.ru/showpost.php?p=2655078&postcount=16) but now there are no gauges at all (just a blank black screen). I am running it as an administrator as before. I copied the files to a separate folder (renamed the old one), and if I run the old exe it fires up just fine with all gauges. Anyone else with this problem? Link to comment Share on other sites More sharing options...
McMicha Posted January 25, 2016 Share Posted January 25, 2016 Hello BravoYankee4, Check the tab “general” in the properties from HawgTouch.exe and HawgTouch.GaugePack.dll. If there is the option “activate on this computer” in the field “attributes” you have to activate this! CU Micha Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" DCS ExportScript D.A.C. DCS to Arcaze Communicator Ikarus a new Virtual Cockpit Software Deutscher Forums Thread English Forums Thread Hard/Software: AMD Ryzen 7 1800X, 32 GiB RAM, extra SSD for Windows 10 and DCS World, AMD Vega Frontier Edition with 16 GiB VRAM Link to comment Share on other sites More sharing options...
HJPuhlmann Posted January 25, 2016 Share Posted January 25, 2016 Please, check the position of the cockpit windows. Perhaps the position is wrong. Heinz Intel i7 3930k | 16 GB | GTX 980 | TrackIR 5 Pro | TM HOTAS Warthog | MFG Crosswind| Win 10 x64 | Simpit Software by SDA"SIMPIT DEVELOPER ASSOCIATION" D.A.C. DCS to Arcaze Communicator Ikarus A Cockpit Designer DCS ExportScript https://github.com/s-d-a/DAC https://github.com/s-d-a/Ikarus https://github.com/s-d-a/DCS-ExportScripts Ikarus forum thread Link to comment Share on other sites More sharing options...
sobe Posted January 25, 2016 Share Posted January 25, 2016 Shouldn't he be trying out Ikanus? Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
BravoYankee4 Posted January 25, 2016 Author Share Posted January 25, 2016 Ok, I have been messing around with this a couple of hours now. First, I forgot about activating the gauge dll, so that explained why I didn't have any gauges visible :blush: Then I had a lot of problems getting the export up and running, eventually I had HT partly working. Only a few instruments were active. EGT was, engine RPM not and so on. Then I tried Ikarus, and that is working fine now with the exports, but it still has the bugs with NPP, KPP and brake pressure as reported previously. However I do like the Ikarus gui with all the improvements and possibilities. Link to comment Share on other sites More sharing options...
Recommended Posts