Jump to content

CK-37 Datapanel Keybinding problem

Rlaxoxo

By Rlaxoxo
in Bugs and Problems

 Share

Recommended Posts

Rlaxoxo

Rlaxoxo

Posted
Posted (edited)

When clicking buttons with a mouse everything works fine.

 

If I use the following binds:

x0bmh06.jpg

 

This happens:

YZun2Fg.jpg

 

Pressed buttons stay pressed don't matter how many times I press them again have to click it with a mouse to make them usable again.

Also ... Input Output switch keybind isn't working

 

Please fix : )

 

________________________________________________________________________________________________________________________

EDIT: 11.06.2017

 

Updated the default.lua's with new working binds that fixes all these issues since devs kinda left it untouched for so long.

 

Not sure why but w/e it works with this if you want to use it

 

Added binds:

 

--(Changes BEGIN 11.06.2017)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--Navigation
--Replacing Existing Controls defined in the .lua for fixing
{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint L MÅL", category = "Navigation"},
{down = 3009, up = 3009, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint LS SKU", category = "Navigation"},
{down = 3010, up = 3010, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint Bx", category = "Navigation"},
{down = 3011, up = 3011, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B1", category = "Navigation"},
{down = 3012, up = 3012, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B2", category = "Navigation"},
{down = 3013, up = 3013, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B3", category = "Navigation"},
{down = 3014, up = 3014, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B4", category = "Navigation"},
{down = 3015, up = 3015, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B5", category = "Navigation"},
{down = 3016, up = 3016, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B6", category = "Navigation"},
{down = 3017, up = 3017, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B7", category = "Navigation"},
{down = 3018, up = 3018, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B8", category = "Navigation"},
{down = 3019, up = 3019, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B9", category = "Navigation"},
{down = 3020, up = 3020, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 0", category = "Navigation"},
{down = 3021, up = 3021, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 1", category = "Navigation"},
{down = 3022, up = 3022, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 2", category = "Navigation"},
{down = 3023, up = 3023, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 3", category = "Navigation"},
{down = 3024, up = 3024, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 4", category = "Navigation"},
{down = 3025, up = 3025, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 5", category = "Navigation"},
{down = 3026, up = 3026, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 6", category = "Navigation"},
{down = 3027, up = 3027, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 7", category = "Navigation"},
{down = 3028, up = 3028, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 8", category = "Navigation"},
{down = 3029, up = 3029, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 9", category = "Navigation"},
{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel IN/UT Input / Output  Switch OUT (UT)", category = "Navigation"},
{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel IN/UT Input / Output switch IN", category = "Navigation"},
{down = 3001, up = 3001, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, value_up = 0.0, name = "Datapanel RENSA (Clear)", category = "Navigation"},


--RENSA Cover ----------
--Added Bind CLOSE ... i "think" ... anyways - replaced one of them added the other
{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel RENSA cover OPEN", category = "Navigation"},
{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel RENSA cover CLOSE", category = "Navigation"},
--Default combo was: "combos = {{key = "C", reformers = {"LAlt", "LShift"}}}" but now colide since there are 2 of them
--RENSA Cover ----------


--Datapanel Selector Mods --------
--Added Binds did not exist before
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.6, name = "Datapanel Rotary Mode 7 - AKT POS", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.5, name = "Datapanel Rotary Mode 6 - REF LOLA", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.4, name = "Datapanel Rotary Mode 5 - BANA GRÄNS", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.3, name = "Datapanel Rotary Mode 4 - VINDRUTA MÅL", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.2, name = "Datapanel Rotary Mode 3 - TID", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.1, name = "Datapanel Rotary Mode 2 - TAKT", category = "Navigation"},
{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel Rotary Mode 1 - ID-NR", category = "Navigation"},
--Datapanel Selector Mods --------

--Weapon Selector --------
--Added Binds did not exist before
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.5, name = "Weapon Selector Knob Mode 6 - IR-RB", category = "Weapons"},
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.4, name = "Weapon Selector Knob Mode 5 - ATTACK", category = "Weapons"},
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.3, name = "Weapon Selector Knob Mode 4 - AKAN JAKT", category = "Weapons"},
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.2, name = "Weapon Selector Knob Mode 3 - LUFT | RR", category = "Weapons"},
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.1, name = "Weapon Selector Knob Mode 2 - RB75 | MARK | DYK", category = "Weapons"},
{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.0, name = "Weapon Selector Knob Mode 1 - SJÖ | PLAN", category = "Weapons"},
--Weapon Selector --------

--Lights--------
--Replacing Existing Controls defined in the .lua & added new ones
{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Anti collision lights switch - ON', category = 'Lights panel'},
{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Anti collision lights switch - OFF' , category = 'Lights panel'},
{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Navigation lights switch - HEL', category = 'Lights panel'},
{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Navigation lights switch - OFF', category = 'Lights panel'},
{down = 3002, cockpit_device_id = devices.LIGHTS, value_down =-1.0, name = 'Navigation lights switch - HALV', category = 'Lights panel'},
{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Formation lights switch - ON', category = 'Lights panel'},
{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Formation lights switch - OFF', category = 'Lights panel'},
{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Position lights switch - ON', category = 'Lights panel'},
{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Position lights switch - OFF', category = 'Lights panel'},
{down = 3009, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Taxi/landing lights switch - ON', category = 'Lights panel'},
{down = 3009, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Taxi/landing lights switch - OFF', category = 'Lights panel'},
{down = 3010, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Emergency lights switch - ON', category = 'Lights panel'},
{down = 3010, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Emergency lights switch - OFF', category = 'Lights panel'},
--Lights--------

--Start Up------
{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Start System - ON', category = 'Motor'},
{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Start System - OFF', category = 'Motor'},
{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Ignition System - ON', category = 'Motor'},
{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Ignition System - OFF', category = 'Motor'},
{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = "Low Pressure Fuel Valve- ON", category = 'Motor'},
{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = "Low Pressure Fuel Valve- OFF", category = 'Motor'},
{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Main Electric Power - ON', category = 'Motor'},
{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Main Electric Power - OFF' , category = 'Motor'},
{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Generator - ON', category = 'Motor'},
{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Generator - OFF', category = 'Motor'},
{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Backup Generator - ON', category = 'Motor'},
{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Backup Generator - OFF', category = 'Motor'},
--Start Up------

--Canopy Fix----
{down = 3405, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = 'Ejection seat Safe', category = 'Flight Control'},
--Canopy Fix----

--Useful Misc --------
--Requested by a few friends, would be nice to have
{pressed = 3307, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 4.0, name = "Altimeter setting Slow - Up", category = "Flight Data"},
{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 0.05, name = "Altimeter setting Medium - Up", category = "Flight Data"},
{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed =-0.05, name = "Altimeter setting Medium - Down", category = "Flight Data"},
{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 0.33, name = "Altimeter setting Fast - Up", category = "Flight Data"},
{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed =-0.33, name = "Altimeter setting Fast - Down", category = "Flight Data"},
{down = 3925, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.5, name = _('Insert Data Cartridge'), category = _('Navigation')},
{down = 3925, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = _('Remove Data Cartridge'), category = _('Navigation')},
{down = 3104, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Autothrottle TOGGLE', category = 'Autopilot'}, --I'll be honest I don't know why this toggles but it does : /
{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = _('Landing Gear Up'), category = _('Flight Control')},
{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 1.0, name = _('Landing Gear Down'), category = _('Flight Control')},
{down = 3001, up = 3001, cockpit_device_id = 7, value_down = 1.0, value_up = 0.0, name = 'Reversal on (HOLD)', category = 'Flight Control'},
--Useful Misc --------

--Added binds from keyboard default.lua
{cdown = 3303, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 1.0, name = _("Weapon jettison Button"), category = _("Weapons")},
{down = 3969, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = -1.0, name = _("Weapon selector turn clockwise"), category = _("Weapons")},
{down = 3408, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down =1.0, name = _('Parking brake'), category = _('Flight Control')},
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--(Changes END 11.06.2017)

 

Attachment added on the post

Keybinds ~~ Viggen ~ Extra Binds (11.07.2017).rar


Edited by Rlaxoxo

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
funkyfranky

funkyfranky

Posted
Posted

And add waypoint BX to that list.

A warrior's mission is to foster the success of others.

i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2

RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss

Link to comment
Share on other sites
Rlaxoxo

Rlaxoxo

Posted
  • Author
Posted

Worked on some new binds here is the code:

 

--(Changes BEGIN 01.02.2017)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

--Navigation

--Replacing Existing Controls defined in the .lua for fixing

{combos = {{key = "9"}}, down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint L MÅL", category = "Navigation"},

{combos = {{key = "9"}}, down = 3009, up = 3009, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint LS SKU", category = "Navigation"},

{combos = {{key = "9"}}, down = 3010, up = 3010, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint Bx", category = "Navigation"},

{combos = {{key = "1"}}, down = 3011, up = 3011, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B1", category = "Navigation"},

{combos = {{key = "2"}}, down = 3012, up = 3012, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B2", category = "Navigation"},

{combos = {{key = "3"}}, down = 3013, up = 3013, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B3", category = "Navigation"},

{combos = {{key = "4"}}, down = 3014, up = 3014, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B4", category = "Navigation"},

{combos = {{key = "5"}}, down = 3015, up = 3015, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B5", category = "Navigation"},

{combos = {{key = "6"}}, down = 3016, up = 3016, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B6", category = "Navigation"},

{combos = {{key = "7"}}, down = 3017, up = 3017, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B7", category = "Navigation"},

{combos = {{key = "8"}}, down = 3018, up = 3018, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B8", category = "Navigation"},

{combos = {{key = "9"}}, down = 3019, up = 3019, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B9", category = "Navigation"},

{combos = {{key = "0", reformers = {"LAlt"}}}, down = 3020, up = 3020, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 0", category = "Navigation"},

{combos = {{key = "1", reformers = {"LAlt"}}}, down = 3021, up = 3021, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 1", category = "Navigation"},

{combos = {{key = "2", reformers = {"LAlt"}}}, down = 3022, up = 3022, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 2", category = "Navigation"},

{combos = {{key = "3", reformers = {"LAlt"}}}, down = 3023, up = 3023, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 3", category = "Navigation"},

{combos = {{key = "4", reformers = {"LAlt"}}}, down = 3024, up = 3024, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 4", category = "Navigation"},

{combos = {{key = "5", reformers = {"LAlt"}}}, down = 3025, up = 3025, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 5", category = "Navigation"},

{combos = {{key = "6", reformers = {"LAlt"}}}, down = 3026, up = 3026, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 6", category = "Navigation"},

{combos = {{key = "7", reformers = {"LAlt"}}}, down = 3027, up = 3027, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 7", category = "Navigation"},

{combos = {{key = "8", reformers = {"LAlt"}}}, down = 3028, up = 3028, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 8", category = "Navigation"},

{combos = {{key = "9", reformers = {"LAlt"}}}, down = 3029, up = 3029, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 9", category = "Navigation"},

{combos = {{key = "N", reformers = {"LShift"}}}, down = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel IN/UT Input / Output Switch OUT (UT)", category = "Navigation"},

{combos = {{key = "N", reformers = {"LCtrl"}}}, down = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel IN/UT Input / Output switch IN", category = "Navigation"},

{combos = {{key = "C", reformers = {"LShift"}}}, down = 3001, up = 3001, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, value_up = 0.0, name = "Datapanel RENSA (Clear)", category = "Navigation"},

 

 

--RENSA Cover ----------

--Added Bind CLOSE ... i "think" ... anyways - replaced one of them added the other

{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel RENSA cover OPEN", category = "Navigation"},

{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel RENSA cover CLOSE", category = "Navigation"},

--Default combo was: "combos = {{key = "C", reformers = {"LAlt", "LShift"}}}" but now colide since there are 2 of them

--RENSA Cover ----------

 

 

--Datapanel Selector Mods --------

--Added Binds did not exist before

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.6, name = "Datapanel Rotary Mode 7 - AKT POS", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.5, name = "Datapanel Rotary Mode 6 - REF LOLA", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.4, name = "Datapanel Rotary Mode 5 - BANA GRÄNS", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.3, name = "Datapanel Rotary Mode 4 - VINDRUTA MÅL", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.2, name = "Datapanel Rotary Mode 3 - TID", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.1, name = "Datapanel Rotary Mode 2 - TAKT", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel Rotary Mode 1 - ID-NR", category = "Navigation"},

--Datapanel Selector Mods --------

 

--Weapon Selector --------

--Added Binds did not exist before

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.5, name = "Weapon Selector Knob Mode 6 - IR-RB", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.4, name = "Weapon Selector Knob Mode 5 - ATTACK", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.3, name = "Weapon Selector Knob Mode 4 - AKAN JAKT", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.2, name = "Weapon Selector Knob Mode 3 - LUFT | RR", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.1, name = "Weapon Selector Knob Mode 2 - RB75 | MARK | DYK", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.0, name = "Weapon Selector Knob Mode 1 - SJÖ | PLAN", category = "Weapons"},

--Weapon Selector --------

 

--Lights--------

--Replacing Existing Controls defined in the .lua & added new ones

{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Anti collision lights switch - ON', category = 'Lights panel'},

{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Anti collision lights switch - OFF' , category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Navigation lights switch - HEL', category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Navigation lights switch - OFF', category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down =-1.0, name = 'Navigation lights switch - HALV', category = 'Lights panel'},

{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Formation lights switch - ON', category = 'Lights panel'},

{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Formation lights switch - OFF', category = 'Lights panel'},

{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Taxi/landing lights switch - ON', category = 'Lights panel'},

{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Taxi/landing lights switch - OFF', category = 'Lights panel'},

 

--Was Previously this --------

-- -- Lights panel

-- {combos = {{key = 'L', reformers = {'LShift'}}}, down = 3001, cockpit_device_id = devices.LIGHTS, value_down = -1.0, name = 'Anti collision lights switch', category = 'Lights'},

-- {combos = {{key = 'L', reformers = {'RCtrl'}}}, down = 3002, cockpit_device_id = devices.LIGHTS, value_down = -2.0, name = 'Navigation lights switch', category = 'Lights'},

-- {combos = {{key = 'L', reformers = {'LCtrl'}}}, down = 3003, cockpit_device_id = devices.LIGHTS, value_down = -1.0, name = 'Formation lights switch', category = 'Lights'},

-- {down = 3005, cockpit_device_id = devices.LIGHTS, value_down = -1.0, name = 'Position lights switch', category = 'Lights'},

-- {down = 3009, cockpit_device_id = devices.LIGHTS, value_down = -1.0, name = 'Taxi/landing lights switch', category = 'Lights'},

--Lights--------

 

--Useful Misc --------

--Requested by a few friends, would be nice to have

{down = 3104, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Autothrottle TOGGLE', category = 'Autopilot'}, --I'll be honest I don't know why this toggles but it does : /

{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = _('Landing Gear Up'), category = _('Flight Control')},

{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 1.0, name = _('Landing Gear Down'), category = _('Flight Control')},

{down = 3001, up = 3001, cockpit_device_id = 7, value_down = 1.0, value_up = 0.0, name = 'Reversal on (HOLD)', category = 'Flight Control'},

--Useful Misc --------

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

--(Changes END 01.02.2017)

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
Rlaxoxo

Rlaxoxo

Posted
  • Author
Posted (edited)

Added Startup binds.

 

--Start Up------

{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Start System - ON', category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Start System - OFF', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Ignition System - ON', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Ignition System - OFF', category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = "Low Pressure Fuel Valve- MAN", category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = "Low Pressure Fuel Valve- AUTO", category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Main Electric Power - ON', category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Main Electric Power - OFF' , category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Generator - ON', category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Generator - OFF', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Backup Generator - ON', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Backup Generator - OFF', category = 'Motor'},

--Start Up------

 

--Canopy Fix----

{down = 3405, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = 'Ejection seat Safe', category = 'Flight Control'},

--Canopy Fix----


Edited by Rlaxoxo

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
funkyfranky

funkyfranky

Posted
Posted
Proposed fix:

I think they added "value_up=0" but forgot the "up=3011" etc. So the buttons still stay depressed :music_whistling:

A warrior's mission is to foster the success of others.

i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2

RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss

Link to comment
Share on other sites
Rlaxoxo

Rlaxoxo

Posted
  • Author
Posted
I think they added "value_up=0" but forgot the "up=3011" etc. So the buttons still stay depressed :music_whistling:

 

Code checks out and works on my end Not sure what you mean

____

EDIT: AH ... nvm you mean THEY as in devs yea ... I noticed that still using my custom keybinds for now till they fix it

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
funkyfranky

funkyfranky

Posted
Posted
Code checks out and works on my end Not sure what you mean

____

EDIT: AH ... nvm you mean THEY as in devs yea ... I noticed that still using my custom keybinds for now till they fix it

Yes, sorry for the confusion. Your code works just fine. I meant the last update from LNS which is still not working as intended.

A warrior's mission is to foster the success of others.

i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2

RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss

Link to comment
Share on other sites
  • 1 month later...
LeCuvier

LeCuvier

Posted
Posted (edited)

Bindings for Rotary Switches

 

I have looked at the control bindings for rotary switches that Rlaxoxo proposes and I have a concern there. As far as I understand the way this works I would need to use 6 of my push-buttons just for the weapon selector knob for example. That's not practical and even if I had so many pushbuttons available, it would not be user-friendly.

I had been studying the file "clickabledata" to find suitable bindings and I found a simple solution for the TILS rotary:

{down = 3510, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 1.0, name = "TILS rotary clockwise", category = "Navigation"},
{down = 3510, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = -1.0, name = "TILS rotary counterclockwise", category = "Navigation"},

This works with a single 3-position up/down toggle and enables me to select any of the modes very easily.

Then I wanted to use the same approach for Master Mode Selector, Weapon Selector and Datapanel Selector, but it doesn't work. Although these rotary switches use the function "multiposition_switch_limited" like the TILS selector, they don't work in the same way. The programming for the TILS uses the command value as an increment, while the other rotaries use the command value as an absolute value. You can argue that it works, and I cannot deny that; but it's in my opinion a poor solution as it requires far too many switches. The approach used for the TILS is the only one that makes any sense and I would highly recommend to use it for all rotaries.


Edited by LeCuvier

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Link to comment
Share on other sites
Rlaxoxo

Rlaxoxo

Posted
  • Author
Posted
I have looked at the control bindings for rotary switches that Rlaxoxo proposes and I have a concern there. As far as I understand the way this works I would need to use 6 of my push-buttons just for the weapon selector knob for example. That's not practical and even if I had so many pushbuttons available, it would not be user-friendly.

I had been studying the file "clickabledata" to find suitable bindings and I found a simple solution for the TILS rotary:

{down = 3510, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 1.0, name = "TILS rotary clockwise", category = "Navigation"},
{down = 3510, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = -1.0, name = "TILS rotary counterclockwise", category = "Navigation"},

This works with a single 3-position up/down toggle and enables me to select any of the modes very easily.

Then I wanted to use the same approach for Master Mode Selector, Weapon Selector and Datapanel Selector, but it doesn't work. Although these rotary switches use the function "multiposition_switch_limited" like the TILS selector, they don't work in the same way. The programming for the TILS uses the command value as an increment, while the other rotaries use the command value as an absolute value. You can argue that it works, and I cannot deny that; but it's in my opinion a poor solution as it requires far too many switches. The approach used for the TILS is the only one that makes any sense and I would highly recommend to use it for all rotaries.

 

You need to have access to source code if you want to make that work.

Since you need to write your own function to make toggle switches or step up / step down selectors

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
LeCuvier

LeCuvier

Posted
Posted
You need to have access to source code if you want to make that work.

Since you need to write your own function to make toggle switches or step up / step down selectors

I wouldn't mess with source code even if I could.

I expect the developers to put this right.

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Link to comment
Share on other sites
  • 2 months later...
Rlaxoxo

Rlaxoxo

Posted
  • Author
Posted (edited)

bumped

 

Still issues with datapanel binds

 

Lines in default.lua are correct but you guys forgot to declare "up=button_id" so it ain't picking up the up function of a bind.

 

Easy fix

 

EDIT: Fixed it my self and updated the first post with a file that can be downloaded to use the functional binds

 

Added binds:

 

--(Changes BEGIN 11.06.2017)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

--Navigation

--Replacing Existing Controls defined in the .lua for fixing

{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint L MÅL", category = "Navigation"},

{down = 3009, up = 3009, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint LS SKU", category = "Navigation"},

{down = 3010, up = 3010, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint Bx", category = "Navigation"},

{down = 3011, up = 3011, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B1", category = "Navigation"},

{down = 3012, up = 3012, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B2", category = "Navigation"},

{down = 3013, up = 3013, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B3", category = "Navigation"},

{down = 3014, up = 3014, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B4", category = "Navigation"},

{down = 3015, up = 3015, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B5", category = "Navigation"},

{down = 3016, up = 3016, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B6", category = "Navigation"},

{down = 3017, up = 3017, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B7", category = "Navigation"},

{down = 3018, up = 3018, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B8", category = "Navigation"},

{down = 3019, up = 3019, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Navigationpanel Waypoint B9", category = "Navigation"},

{down = 3020, up = 3020, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 0", category = "Navigation"},

{down = 3021, up = 3021, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 1", category = "Navigation"},

{down = 3022, up = 3022, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 2", category = "Navigation"},

{down = 3023, up = 3023, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 3", category = "Navigation"},

{down = 3024, up = 3024, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 4", category = "Navigation"},

{down = 3025, up = 3025, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 5", category = "Navigation"},

{down = 3026, up = 3026, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 6", category = "Navigation"},

{down = 3027, up = 3027, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 7", category = "Navigation"},

{down = 3028, up = 3028, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 8", category = "Navigation"},

{down = 3029, up = 3029, cockpit_device_id = devices.NAVIGATION, value_down = 1.0, value_up = 0, name = "Datapanel Digit 9", category = "Navigation"},

{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel IN/UT Input / Output Switch OUT (UT)", category = "Navigation"},

{down = 3008, up = 3008, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel IN/UT Input / Output switch IN", category = "Navigation"},

{down = 3001, up = 3001, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, value_up = 0.0, name = "Datapanel RENSA (Clear)", category = "Navigation"},

 

 

--RENSA Cover ----------

--Added Bind CLOSE ... i "think" ... anyways - replaced one of them added the other

{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 1.0, name = "Datapanel RENSA cover OPEN", category = "Navigation"},

{down = 3101, up = 3101, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel RENSA cover CLOSE", category = "Navigation"},

--Default combo was: "combos = {{key = "C", reformers = {"LAlt", "LShift"}}}" but now colide since there are 2 of them

--RENSA Cover ----------

 

 

--Datapanel Selector Mods --------

--Added Binds did not exist before

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.6, name = "Datapanel Rotary Mode 7 - AKT POS", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.5, name = "Datapanel Rotary Mode 6 - REF LOLA", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.4, name = "Datapanel Rotary Mode 5 - BANA GRÄNS", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.3, name = "Datapanel Rotary Mode 4 - VINDRUTA MÅL", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.2, name = "Datapanel Rotary Mode 3 - TID", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.1, name = "Datapanel Rotary Mode 2 - TAKT", category = "Navigation"},

{down = 3009, cockpit_device_id = devices.NAVIGATIONPANEL, value_down = 0.0, name = "Datapanel Rotary Mode 1 - ID-NR", category = "Navigation"},

--Datapanel Selector Mods --------

 

--Weapon Selector --------

--Added Binds did not exist before

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.5, name = "Weapon Selector Knob Mode 6 - IR-RB", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.4, name = "Weapon Selector Knob Mode 5 - ATTACK", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.3, name = "Weapon Selector Knob Mode 4 - AKAN JAKT", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.2, name = "Weapon Selector Knob Mode 3 - LUFT | RR", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.1, name = "Weapon Selector Knob Mode 2 - RB75 | MARK | DYK", category = "Weapons"},

{down = 3304, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 0.0, name = "Weapon Selector Knob Mode 1 - SJÖ | PLAN", category = "Weapons"},

--Weapon Selector --------

 

--Lights--------

--Replacing Existing Controls defined in the .lua & added new ones

{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Anti collision lights switch - ON', category = 'Lights panel'},

{down = 3001, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Anti collision lights switch - OFF' , category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Navigation lights switch - HEL', category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Navigation lights switch - OFF', category = 'Lights panel'},

{down = 3002, cockpit_device_id = devices.LIGHTS, value_down =-1.0, name = 'Navigation lights switch - HALV', category = 'Lights panel'},

{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Formation lights switch - ON', category = 'Lights panel'},

{down = 3003, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Formation lights switch - OFF', category = 'Lights panel'},

{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Position lights switch - ON', category = 'Lights panel'},

{down = 3004, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Position lights switch - OFF', category = 'Lights panel'},

{down = 3009, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Taxi/landing lights switch - ON', category = 'Lights panel'},

{down = 3009, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Taxi/landing lights switch - OFF', category = 'Lights panel'},

{down = 3010, cockpit_device_id = devices.LIGHTS, value_down = 1.0, name = 'Emergency lights switch - ON', category = 'Lights panel'},

{down = 3010, cockpit_device_id = devices.LIGHTS, value_down = 0.0, name = 'Emergency lights switch - OFF', category = 'Lights panel'},

--Lights--------

 

--Start Up------

{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Start System - ON', category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Start System - OFF', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = 'Ignition System - ON', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Ignition System - OFF', category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.0, name = "Low Pressure Fuel Valve- ON", category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = "Low Pressure Fuel Valve- OFF", category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Main Electric Power - ON', category = 'Motor'},

{down = 3001, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Main Electric Power - OFF' , category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Generator - ON', category = 'Motor'},

{down = 3002, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Generator - OFF', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 1.0, name = 'Backup Generator - ON', category = 'Motor'},

{down = 3003, cockpit_device_id = devices.ELECTRICSYSTEM, value_down = 0.0, name = 'Backup Generator - OFF', category = 'Motor'},

--Start Up------

 

--Canopy Fix----

{down = 3405, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = 'Ejection seat Safe', category = 'Flight Control'},

--Canopy Fix----

 

--Useful Misc --------

--Requested by a few friends, would be nice to have

{pressed = 3307, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 4.0, name = "Altimeter setting Slow - Up", category = "Flight Data"},

{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 0.05, name = "Altimeter setting Medium - Up", category = "Flight Data"},

{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed =-0.05, name = "Altimeter setting Medium - Down", category = "Flight Data"},

{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed = 0.33, name = "Altimeter setting Fast - Up", category = "Flight Data"},

{pressed = 3306, cockpit_device_id = devices.FLIGHTDATAUNIT, value_pressed =-0.33, name = "Altimeter setting Fast - Down", category = "Flight Data"},

{down = 3925, cockpit_device_id = devices.ENGINEPANEL, value_down = 1.5, name = _('Insert Data Cartridge'), category = _('Navigation')},

{down = 3925, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = _('Remove Data Cartridge'), category = _('Navigation')},

{down = 3104, cockpit_device_id = devices.ENGINEPANEL, value_down = 0.0, name = 'Autothrottle TOGGLE', category = 'Autopilot'}, --I'll be honest I don't know why this toggles but it does : /

{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 0.0, name = _('Landing Gear Up'), category = _('Flight Control')},

{down = 3719, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down = 1.0, name = _('Landing Gear Down'), category = _('Flight Control')},

{down = 3001, up = 3001, cockpit_device_id = 7, value_down = 1.0, value_up = 0.0, name = 'Reversal on (HOLD)', category = 'Flight Control'},

--Useful Misc --------

 

--Added binds from keyboard default.lua

{cdown = 3303, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = 1.0, name = _("Weapon jettison Button"), category = _("Weapons")},

{down = 3969, cockpit_device_id = devices.WEAPON_SYSTEM, value_down = -1.0, name = _("Weapon selector turn clockwise"), category = _("Weapons")},

{down = 3408, cockpit_device_id = devices.FLIGHTDATAUNIT, value_down =1.0, name = _('Parking brake'), category = _('Flight Control')},

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

--(Changes END 11.06.2017)


Edited by Rlaxoxo

[sIGPIC][/sIGPIC]

Youtube

Reddit

Link to comment
Share on other sites
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...