Deadman Posted July 9, 2014 Posted July 9, 2014 I have a set of three A-10A cockpit posters. The Instrument Panel Left and right Consoles as of 5 Jan 1974 if there is enough interest I can get these professionally scanned and reprinted before I have them framed for the cock pit room. They are not scale blue print drawings the font is not correct either they are hand drawn and very retro A-10A. You will notice the old style center pull ejection handle of the ESCAPAC IE-9 ejection seat. Sorry the picture are not great from my phone let me know if any one is interested as all way there will be a minimum order to cover all of the cost. I have some where around $70 just in to the originals and I found out scanning cost about $2.00 a square foot so about $20.00 each for scanning I will check on poster sites and check on printing cost. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted July 9, 2014 Author Posted July 9, 2014 Sorry guys double posted this lets use this thread thanks https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
MacFevre Posted July 9, 2014 Posted July 9, 2014 Sign me up DM! Buttons aren't toys! :smilewink: My new Version 2 Pit: MacFevre A-10C SimPit V2 My first pit thread: A-10C Simulator Pit "The TARDIS." Dzus Fastener tutorial, on the inexpensive side: DIY Dzus Fastener
Deadman Posted July 10, 2014 Author Posted July 10, 2014 any one else? https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted July 24, 2014 Author Posted July 24, 2014 Well with no other interest in these I will be getting some frames and hanging them up in the Sim Hanager https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
moken Posted July 24, 2014 Posted July 24, 2014 May I ask you that the ratio wthether is 1:1 with original size of cockpit?
drsgfire Posted July 24, 2014 Posted July 24, 2014 I would recommend still scanning them though. You never know what the future holds. They are pretty BA though. Where did you get them?
MacFevre Posted July 24, 2014 Posted July 24, 2014 Well DM, my birthday is coming up, so :music_whistling: :lol: Buttons aren't toys! :smilewink: My new Version 2 Pit: MacFevre A-10C SimPit V2 My first pit thread: A-10C Simulator Pit "The TARDIS." Dzus Fastener tutorial, on the inexpensive side: DIY Dzus Fastener
Strut Posted July 25, 2014 Posted July 25, 2014 They are very good DM, love your ability to find this stuff mate, id love a copy but logistics to here is a bit shonky, probably end up ripped and bent. But the scanning idea sounds great and would be to your future benefit i rekon. Regards DL available skins here: https://www.digitalcombatsimulator.com/en/files/?CREATED_BY=Strut Pictures of my Skins here: https://imgur.com/a/bOQyQqW [sIGPIC][/sIGPIC] Win10 64bit, Intel® Core i7-5820K CPU OC @ 4.50GHz x6, X99A GAMING PRO CARBON, MSI RTX 2080 TI GAMING X TRIO 11Gb, 32GB DDR4 RAM, SSD 960 EVO250GB, SSD 850 EVO 500GB, JetSeat, MFG Crosswind Pedals, VPC Mongoose T-50, TMWH, DSD ButtonBox, Pimax 5k XR/BE
Deadman Posted July 25, 2014 Author Posted July 25, 2014 Hi Moken as posted in the first paragraph no they are hand drawn and not to exact scale the drawing have no value as a blue print.May I ask you that the ratio wthether is 1:1 with original size of cockpit? The cost of scanning them in one shot is quite a bit so with out interest from the community in purchasing copies there is no reason for me to make the investment. I purchase these from my local A-10 surplus store. I would recommend still scanning them though. You never know what the future holds. They are pretty BA though. Where did you get them? Happy birthday Well DM, my birthday is coming up, so :music_whistling: :lol: Hi when I post to you area i make sure that the package material with provide more than sufficient protection, regrettably there is not the interested I had hoped for on these . They are very good DM, love your ability to find this stuff mate, id love a copy but logistics to here is a bit shonky, probably end up ripped and bent. But the scanning idea sounds great and would be to your future benefit i rekon. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
MacFevre Posted July 25, 2014 Posted July 25, 2014 I purchase these from my local A-10 surplus store. Ha! See!? I don't care what anyone else says about you, DM. You do have a sense of humor! :lol: I kid, of course. :smilewink: but I swear, if you don't have an "A-10's-Are-Us" store nearby, you could open one! :D Buttons aren't toys! :smilewink: My new Version 2 Pit: MacFevre A-10C SimPit V2 My first pit thread: A-10C Simulator Pit "The TARDIS." Dzus Fastener tutorial, on the inexpensive side: DIY Dzus Fastener
Recommended Posts