F-15C Left wheel brake axis?

[Basco1]

Hi,I recently installed the DCS 15-C for DCS World,but I'm led to believe it's the same flight model for FC3 too,so here's my problem.

 

When assigning the wheel brakes for Left wheel brake I can't get my Saitek Combat Rudder pedals to recognise the Left Axis for the Left wheel brake option.

 

The right side works without a problem,all my other DCS Module aircraft that use left/right wheel brakes work ok,is there anybody else who has come across this glitch?

 

Again,the rudder works ok,it's just this Left wheel brake axis.

 

Any help or advice would be richly appreciated thank you :thumbup:

[WildBillKelsoe]

the axis settings have left brake and right brake. if not, delete your saved games folder and it reconstructs controls. make sure no doubles.

[Basco1]

Thanks Wild Bill,I thought it must have left and right Axis,maybe my Left Axis is stuck,anyway and I'll try this,much appreciated friend :thumbup:

[winchesterdelta1]

DCS F-15C is the same as the FC3 one.

[Basco1]

Thanks guys,for some reason the Axis on my left brake was not working at the time I was binding it to acknowledge the 'Left brake'Axis............but all ok now,I appreciate all the help guys,thank you very much :thumbup:

[Shack]

My wheel brake stays activated after the initial press. Both Left and Right brakes individually.  I can initially taxi but after the initial press of the brake, it just stays locked ? 

[mikko.1842]

7 hours ago, Shack said:

My wheel brake stays activated after the initial press. Both Left and Right brakes individually.  I can initially taxi but after the initial press of the brake, it just stays locked ? 

What you are describing is not the normal behavior for wheel brakes. As soon as you release a brake, it should stop being activated. Anyway, in DCS, I rarely taxi the F-15C with wheel brakes, but I would rather use the rudder axis.

Did you check your key mappings ? Did you calibrate your input device ?

I am joining a take-off track so you can check how wheel brakes work with my setup (right Ctrl + Enter to show the axis inputs).

 

F-15C_WheelbrakesTest_Nellis_01062024_12-55.trk

[Shack]

I missed inverting the curves !   Thanks.