triumph Posted February 18, 2015 Posted February 18, 2015 it works for a short time followed by. buttons not functioning, but stick and throttle still working. trakir still working, but keyboard non active, cant ctrl alt delete for task manager. cant use escape. first time, it got me back to desktop, and reported a few syntax errors. I checked for control conflicts. second time I had to do a hot shutdown. ok so target is bugged. target software suggests, that it will launch dcs, it doesn't, after a wait I launch from the dcs icon. a lot of cash for a product that looks good, but should not lock me out of my own pc, asus p6t ws pro mobo.i7 975 extreme cpu..nvid rog strix 1070 gpu.1000+w enermax psu.12 gb domi ram.twin velociraptors.w7 64..ch stick,throttle,pedals,trakir..x52 pro stick,throttle.. thrustmaster warthog
jcbak Posted February 18, 2015 Posted February 18, 2015 Try it without the Target software. I don't use Target and have no issues. [sIGPIC][/sIGPIC]WIN 10, i7 10700, 32GB DDR4, RTX 2080 Super, Crucial 1TB SSD, Samsung EVO 850 500GB SSD, TM Warthog with 10cm extension, TIR5, MFG Crosswind Pedals, Wheelstand Pro, LG 40" 4K TV, Razer Black Widow Ultimate KB[/size]
RogueSqdn Posted February 18, 2015 Posted February 18, 2015 Are your stick and throttle plugged into the motherboard or into a hub? Is the hub powered? Reliable? It's possible your hub is shorting and causing the stick or throttle to disconnect, thus causing TARGET to stop your script, and causing DCS to have problems discerning what controls are present. I've had it happen with a few 12-port hubs before. DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)
triumph Posted February 19, 2015 Author Posted February 19, 2015 Are your stick and throttle plugged into the motherboard or into a hub? Is the hub powered? Reliable? It's possible your hub is shorting and causing the stick or throttle to disconnect, thus causing TARGET to stop your script, and causing DCS to have problems discerning what controls are present. I've had it happen with a few 12-port hubs before. my stick, throttle, trakir, rudder. all into mobo. dcs is all I run these days. seems to work outside of target. although it would be nice to have the left hand throttle set for prop control for p51d. but it only works as two separate controls in A10C. asus p6t ws pro mobo.i7 975 extreme cpu..nvid rog strix 1070 gpu.1000+w enermax psu.12 gb domi ram.twin velociraptors.w7 64..ch stick,throttle,pedals,trakir..x52 pro stick,throttle.. thrustmaster warthog
RogueSqdn Posted February 19, 2015 Posted February 19, 2015 Then at that point I'd suggest uninstalling TARGET, restarting, and reinstalling. And make sure your plugs aren't coming loose. DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)
Iku_CC Posted February 19, 2015 Posted February 19, 2015 (edited) Is your script fully tested? Sometimes some wrong programming with target makes some button send key press all the time and then keyboard is not working...have you tested your script with Event tester? Have you checked and configured your configuration at DCS after you have loaded TARGET profile... Edited February 19, 2015 by Iku64 [sIGPIC][/sIGPIC] HP Z420 | Xeon E5-1650 @3.20GHz/3.70Ghz | 16Gb DDR3-1333 | ZOTAC GTX 980 Ti AMP! | Micron RealSSD C400 256Gb | Sound Blaster Z | TrackIR4 | Thrustmaster HOTAS Warthog| CH Pro pedals | Win 10 Pro 64-bit
triumph Posted February 19, 2015 Author Posted February 19, 2015 (edited) yes good call Is your script fully tested? Sometimes some wrong programming with target makes some button send key press all the time and then keyboard is not working...have you tested your script with Event tester? Have you checked and configured your configuration at DCS after you have loaded TARGET profile... I followed the instructions exactly. but its highly probable that the script is out of date. I will test with event tester. I assume probably incorrectly that the driver and target software, which includes a short list of profiles downloaded 3 days ago would be up to date, and not corrupted. a corrupt download is not unusual, I don't think that's the case. target manual says point at DCS update, and add profile in box provided. I would assume at launch it would, run script, launch updater, which in turn launches DCS. but it doesn't launch DCS, I have to do it manually, is this normal ?. no chance of loose usb cables, in this room are two very large desks and self built computers. its my computer room. did a reinstall, etc. running outside of target it works perfectly. can now use left throttle as prop control, in p51d. need to absorb the target manual, before using it. Edited February 20, 2015 by triumph new data asus p6t ws pro mobo.i7 975 extreme cpu..nvid rog strix 1070 gpu.1000+w enermax psu.12 gb domi ram.twin velociraptors.w7 64..ch stick,throttle,pedals,trakir..x52 pro stick,throttle.. thrustmaster warthog
Recommended Posts