Jump to content

Recommended Posts

Posted

Hello all,

 

I am playing DCS World on Steam.

 

Please see the attached image

 

2015_07_10_00001.jpg

 

As you can see, I have a loadout that contains AIM-120's in it, but the AIM-120's do not show up in the rearming configuration window. Only the fuel tank and AIM-9's do. I should note that all other weapons/fuel tanks show up fine EXCEPT for the "AIM-120". Correct me if I am wrong, but the "AIM-120" is the AIM-120C, correct? Because I can select other loadouts that have the AIM-120B and those show up fine.

 

What in the world is going on here? When I try and rearm, the ground crew does not arm me with AIM-120's. Again, every other weapon BESIDES this one works. I think I may just install the non steam version.

"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo da Vinci

Intel i7-4790k | Cooler Master Hyper 212 Evo heat sink | Thermaltake Core V71 case | 750W EVGA PSU | 8gb G.SKILL Ripjaws DDR3 RAM | MSI Z97 Gaming 5 LGA 1150 motherboard | Samsung SSD | ASUS STRIX GTX 970 | Thrustmaster HOTAS Warthog | TIR 5 | Razer Deathadder | Corsair K70

Posted

One positibility is the mission uses airbase resources and Aim-120Cs simply aren't available. You can check by right clicking a pylon that can carry it on the re-arming screen and see if Aim-120Cs are listed. If not, then the missile isn't available due to the resources defined in that mission and you are forced to use something else.

 

If they are listed then you can select your payload manually and the problem would likely be the loadout preset has incorrect data.

The right man in the wrong place makes all the difference in the world.

Current Projects:  Grayflag ServerScripting Wiki

Useful Links: Mission Scripting Tools MIST-(GitHub) MIST-(Thread)

 SLMOD, Wiki wishlist, Mission Editing Wiki!, Mission Building Forum

Posted
One positibility is the mission uses airbase resources and Aim-120Cs simply aren't available. You can check by right clicking a pylon that can carry it on the re-arming screen and see if Aim-120Cs are listed. If not, then the missile isn't available due to the resources defined in that mission and you are forced to use something else.

 

If they are listed then you can select your payload manually and the problem would likely be the loadout preset has incorrect data.

 

Thank you so much for the reply. I will report back once I am done reinstalling.

 

I will say this, this image was taken from the "Cold Start" instant action mission that comes with the F-15C. I was having the same issue on the 104th server. So effectively I had the same issue in two different missions. I did not know about the right click feature so that is my last hope. If that doesn't work I will install the non-steam version.

 

Lastly, is the AIM-120C normally listed as "AIM-120" in the loadout selector?

"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo da Vinci

Intel i7-4790k | Cooler Master Hyper 212 Evo heat sink | Thermaltake Core V71 case | 750W EVGA PSU | 8gb G.SKILL Ripjaws DDR3 RAM | MSI Z97 Gaming 5 LGA 1150 motherboard | Samsung SSD | ASUS STRIX GTX 970 | Thrustmaster HOTAS Warthog | TIR 5 | Razer Deathadder | Corsair K70

Posted
One positibility is the mission uses airbase resources and Aim-120Cs simply aren't available. You can check by right clicking a pylon that can carry it on the re-arming screen and see if Aim-120Cs are listed. If not, then the missile isn't available due to the resources defined in that mission and you are forced to use something else.

 

If they are listed then you can select your payload manually and the problem would likely be the loadout preset has incorrect data.

 

The right clicking method worked! Thank you so much, you have saved me such a headache. Hopefully this thread can help others with the same issue :thumbup:

"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo da Vinci

Intel i7-4790k | Cooler Master Hyper 212 Evo heat sink | Thermaltake Core V71 case | 750W EVGA PSU | 8gb G.SKILL Ripjaws DDR3 RAM | MSI Z97 Gaming 5 LGA 1150 motherboard | Samsung SSD | ASUS STRIX GTX 970 | Thrustmaster HOTAS Warthog | TIR 5 | Razer Deathadder | Corsair K70

Posted
It only affects the AIM-120C, not the -B.

On my end at least.

 

Yep, same here. Do you have the Steam version?

"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo da Vinci

Intel i7-4790k | Cooler Master Hyper 212 Evo heat sink | Thermaltake Core V71 case | 750W EVGA PSU | 8gb G.SKILL Ripjaws DDR3 RAM | MSI Z97 Gaming 5 LGA 1150 motherboard | Samsung SSD | ASUS STRIX GTX 970 | Thrustmaster HOTAS Warthog | TIR 5 | Razer Deathadder | Corsair K70

Posted (edited)

Nope. Non steam for me.

The issue appeared after an update not so long ago, but don't remember which one.

Have you tried making a custom load out in ME SP and picking that in MP?

 

EDIT: I think it affects everybody, because online i often hear ppl asking why they can't have slammers.

 

EDIT EDIT: I lied. On one of my new custom load outs i have -B's missing as well.

Edited by Svend_Dellepude

[sIGPIC][/sIGPIC]

Win10 64, Asus Maximus VIII Formula, i5 6600K, Geforce 980 GTX Ti, 32 GB Ram, Samsung EVO SSD.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...