DickeAutos Posted July 10, 2016 Share Posted July 10, 2016 Hi, after the last mirage update, the ANEMO controll light keeps on after the start-up procedure. Any ideas how to get this off? Thank you in advance! Link to comment Share on other sites More sharing options...
Eihort Posted July 10, 2016 Share Posted July 10, 2016 If this is the light I'm thinking of, you need to go to the left rear panel and cycle the FBW self-test switch to clear it. It has a safety cover on it. Link to comment Share on other sites More sharing options...
grunf Posted July 10, 2016 Share Posted July 10, 2016 It's the pitot heat warning. Link to comment Share on other sites More sharing options...
IonicRipper Posted July 10, 2016 Share Posted July 10, 2016 ^ This, you need to find the switch and turn on pitot heat. It is on the right side near the INS panel if I remember correctly. There is 3 switches in a row and its the last one from the top with a reg guard over it. i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
VTJS17_Fire Posted July 11, 2016 Share Posted July 11, 2016 The pitot heat switch is behind the master caution switch. Hardware: Intel i5 4670K | Zalman NPS9900MAX | GeIL 16GB @1333MHz | Asrock Z97 Pro4 | Sapphire Radeon R9 380X Nitro | Samsung SSDs 840 series 120GB & 250 GB | Samsung HD204UI 2TB | be quiet! Pure Power 530W | Aerocool RS-9 Devil Red | Samsung SyncMaster SA350 24" + ASUS VE198S 19" | Saitek X52 | TrackIR 5 | Thrustmaster MFD Cougar | Speedlink Darksky LED | Razor Diamondback | Razor X-Mat Control | SoundBlaster Tactic 3D Rage ### Software: Windows 10 Pro 64Bit [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
DickeAutos Posted July 11, 2016 Author Share Posted July 11, 2016 Thank you very much! I think this procedure is necessary to get the CONF Light off - if I remember correctly: If this is the light I'm thinking of, you need to go to the left rear panel and cycle the FBW self-test switch to clear it. It has a safety cover on it. Link to comment Share on other sites More sharing options...
CrashO Posted July 11, 2016 Share Posted July 11, 2016 Thank you very much! I think this procedure is necessary to get the CONF Light off - if I remember correctly: DECOL requires the FBW test (and trim in neutral, and something else I forgot) CONF indicates the G-Limit needs to be changed. (It depends on your load) Link to comment Share on other sites More sharing options...
Recommended Posts