raymondabel Posted September 7, 2018 Share Posted September 7, 2018 We do not duplicate anything today. I think it still works like it was back then. Unfortunately. I had a bit of a hunch that I would not have to change the DCS scripts to get those expenses. That worked. Unfortunately in the version 2.5 no more. your reply prove me that my question is not clear. In Ikarus, the RWR if just a clear frame with no DATA. The DATA needs to comes from DCS like the MFCD. so how to make RWR DATA "under" the Ikasus so it can be seen thruth ? see the fisrt picture : https://forums.eagle.ru/showthread.php?t=70716 this is V1.1.1.1 old I am loog for a new and beter way to do it I am sure you are doing it but my question is not clear (bad english level...) Thanks for your time Link to comment Share on other sites More sharing options...
H-J-P Posted September 7, 2018 Share Posted September 7, 2018 (edited) You need a hole in the Ikarus copit. We use png - files. This makes it possible to define a transperency. Also a semitrancy. Does that answer your question? I have to take a closer look tomorrow ... let's see .. I'll contact you. It would be nice if there was another way. Edited September 7, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 7, 2018 Share Posted September 7, 2018 You need a hole in the Ikarus copit. We use png - files. This makes it possible to define a transperency. Also a semitrancy. Does that answer your question? I need the green info to show up in the monitor then I will be able to start Ikarus over it Link to comment Share on other sites More sharing options...
raymondabel Posted September 8, 2018 Share Posted September 8, 2018 Can you see. I need this top center the little "A" Link to comment Share on other sites More sharing options...
H-J-P Posted September 8, 2018 Share Posted September 8, 2018 @JAT Problems found for "UHF radio mode select" and "Tacan mode select". :thumbup: Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
H-J-P Posted September 8, 2018 Share Posted September 8, 2018 (edited) @raymondabel You have to understand that we can not offer customized solutions. That would exceed my time. Please try it yourself. It's not that hard either. There are some forums that have already dealt with this. You have to make changes to the Lua - files in DCS. Just search. This is always necessary with the RWR. Unfortunately. Edited September 8, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 8, 2018 Share Posted September 8, 2018 @raymondabel You have to understand that we can not offer customized solutions. That would exceed my time. Please try it yourself. It's not that hard either. probably all Ikarus user had done the modification yet. AN_ALR69V_init.lua needs to be modify C:\Program Files\eagle dynamics\DCS World\Mods\A-10C - Instrument Export\Mods\aircraft\A-10C\Cockpit\scripts\AN_ALR69V\indicator\AN_ALR69V_init.lua and C:\Program Files\eagle dynamics\DCS World\Config\MonitorSetup Link to comment Share on other sites More sharing options...
H-J-P Posted September 8, 2018 Share Posted September 8, 2018 Very good raymondabel. Remember, if an update is installed, then your changes are overwritten again. Make a backup. :smilewink: Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 8, 2018 Share Posted September 8, 2018 (edited) Very good raymondabel. Remember, if an update is installed, then your changes are overwritten again. Make a backup. :smilewink: :) is it possible to have yours AN_ALR69V_init.lua for A-10C yours MonitorSetup *.lua file assoated witj it then? mine is for V1.1.1.1 so it must have gone thout a lot of changes since then Thanks for your time Ray Edited September 8, 2018 by raymondabel Link to comment Share on other sites More sharing options...
JAT Posted September 8, 2018 Share Posted September 8, 2018 Aha, that's great ! Link to comment Share on other sites More sharing options...
H-J-P Posted September 8, 2018 Share Posted September 8, 2018 @JAT I upload Developer Version 1.4.5.3n for M-2000C bug fixes and lights panel and F/A-18 compass. McMicha is still working on the displays. There are also 2 supplemented lua files. Please copy accordingly. Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
JAT Posted September 9, 2018 Share Posted September 9, 2018 (edited) Great improvement, congrats ! Here are my remarks: - UHF mode switch still return to the default position by itself - Barometric pressure calibration knob stop turning after some clics - All lights must be a 3 position switch - Hydraulique emergency pump switch must be a 3 position switch - Pitot heat switch must be down as default position You are near the end on this i think :) Edited September 9, 2018 by JAT Link to comment Share on other sites More sharing options...
H-J-P Posted September 9, 2018 Share Posted September 9, 2018 (edited) I am only finished when you are satisfied. We'll get that very soon. Edited September 9, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 10, 2018 Share Posted September 10, 2018 (edited) I found what I was looking for: https://forums.eagle.ru/showthread.php?t=70716&page=62 Export - All Viewports.rar Edited September 10, 2018 by raymondabel Link to comment Share on other sites More sharing options...
slowmover Posted September 13, 2018 Share Posted September 13, 2018 I am trying to put ikarus at the second screen but i can not.Any can help? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
raymondabel Posted September 13, 2018 Share Posted September 13, 2018 I am trying to put ikarus at the second screen but i can not.Any can help? for A-10c but it will probably works for all open Ikarus click configutration find front panel find "Pos X" then change zero" for what you need find "Pos Y" then change zero" for what you need Save refresh wala Link to comment Share on other sites More sharing options...
slowmover Posted September 13, 2018 Share Posted September 13, 2018 (edited) for A-10c but it will probably works for all open Ikarus click configutration find front panel find "Pos X" then change zero" for what you need find "Pos Y" then change zero" for what you need Save refresh wala it is already to zero both.i should change ip to 192.160.0.192? Edited September 13, 2018 by slowmover [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
raymondabel Posted September 13, 2018 Share Posted September 13, 2018 it is already to zero both.i should change ip to 192.160.0.192? IP adress as nothig to do with screen position it should be let at 127.0.0.1 AFAIAK Link to comment Share on other sites More sharing options...
raymondabel Posted September 13, 2018 Share Posted September 13, 2018 (edited) it is already to zero both.i should change ip to 192.160.0.192? welll if you read what I wrote CHANGE the zero to an othe digit so if you have 2 screen lone over the other Pos Y is set to 1080 in my case. Pl take time to READ when someone take the time to reply to you. If you do not undersand then say: "your english level is poor and I do not undersatnd" That will be better Edited September 13, 2018 by raymondabel Link to comment Share on other sites More sharing options...
slowmover Posted September 13, 2018 Share Posted September 13, 2018 (edited) welll if you read what I wrote CHAGE the zero to an othe digit so if you have 2 screen lone over the other Pos Y is set to 1080 in my case. Pl take time to READ when someone take the time to reply to you. If you do not undersand then say: "your english level is poor and I do not undersatnd" That will be better It was a mistake.I was reading fast i did not understand what you said.I did what you say but just the panel get smaller.Both windows DCS and IKARUS is at the same screen,I make something wrong but i can not find it.I choosed panel 1 nad 2. Edited September 13, 2018 by slowmover [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
raymondabel Posted September 13, 2018 Share Posted September 13, 2018 (edited) It was a mistake.I was reading fast i did not understand what you said.I did what you say but just the panel get smaller.Both windows DCS and IKARUS is at the same screen,I make something wrong but i can not find it.I choosed panel 1 nad 2. be sure you modify Pos X and Pos Y nor Width or Height... :) Also, yau have to finf the main panel. On A-10C it is call Front Panel. Witch plane would you like to modify? Question: Do you have 2 sreens or you try to have DCS and Ikarus on the same screen? Edited September 13, 2018 by raymondabel Link to comment Share on other sites More sharing options...
slowmover Posted September 13, 2018 Share Posted September 13, 2018 Yes i do that i am sure :) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
raymondabel Posted September 18, 2018 Share Posted September 18, 2018 (edited) allo little "bugs" I found it the A-10C profile: mostly all the same thing 3 way switch are not set properly when you start the profile. AHCP - Turn On/Off/Test IFFCC; DCSID 384 at test should be at off all CMSP 3way switch should be at off but start at on Not clear withLand Taxi Lights DCSID 655 but should start at off. I try to find a way to fix it myself but I am no programer at all. Just an happy user. One thing, I have to set those each time because I notice that when I do not do it, DCS freese. I can not make a clear relation one on one (Univeral Radio)+Ikarus= DCS freese yet to help to find what is wrong. Thanks for your time Ray Edited September 19, 2018 by raymondabel Link to comment Share on other sites More sharing options...
H-J-P Posted September 19, 2018 Share Posted September 19, 2018 @Ray Thanks for the good bug report. I will release a new version soon. Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
H-J-P Posted September 19, 2018 Share Posted September 19, 2018 (edited) Just one thing. You do not have to be a programmer. It just needs to be configured accordingly. Anyone who has read our wiki should be able to do that. Of course, I'm doing this now, so that everyone has something of it. Please send more reports and take a closer look. Thank you. The A-10C was our first project with Ikarus. Since then a lot has changed. :thumbup: Edited September 19, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
Recommended Posts