Pickle72 Posted March 27, 2018 Posted March 27, 2018 (edited) First post! I'm new to DCS and just getting my feet wet with the frogfoot. I am surprised to say I am really enjoying this aircraft, was not sure that would happen. My question is, is there any fire suppression on the frogfoot? I always seem to be on fire:cry: Sometimes I almost make it back for an emergency landing before the fuel tanks explode, but most times I don’t. Do we have fire extinguishers modeled in this module? Any advice. Also I am trying to complete the very first mission in the campaign. Any advice here? I can usually take out a few tanks just past waypoint 3 but I almost never make to the recon area between waypoint 5,6. Read my first question above :helpsmilie: Thanks Edited March 27, 2018 by Pickle72 T-16000M FCS | Track IR5 | Quest 2 | ASROCK Z370 | i7-8700k | GTX1080-OC | 32GB DDR4 | Windows 10 | OSX High Sierra for real work Hack build
FlankerMan Posted March 27, 2018 Posted March 27, 2018 Do you mean the Su-25T, or the plain version with FC3? Either way, I've never done the campaign, and I don't know if there are any fire extinguishers, or any other way to keep the flames from destroying your aircraft. I myself prefer the fighters, mainly the F-15C, MiG-29S, and Su-27, but the Frogfoot is a worthy attack aircraft. I hope you figure out how to make it!:thumbup: Sorry I don't know how to help.:cry:
Ironhand Posted March 27, 2018 Posted March 27, 2018 First post! I'm new to DCS and just getting my feet wet with the frogfoot. I am surprised to say I am really enjoying this aircraft, was not sure that would happen. My question is, is there any fire suppression on the frogfoot? I always seem to be on fire:cry: Sometimes I almost make it back for an emergency landing before the fuel tanks explode, but most times I don’t. Do we have fire extinguishers modeled in this module? Any advice. Also I am trying to complete the very first mission in the campaign. Any advice here? I can usually take out a few tanks just past waypoint 3 but I almost never make to the recon area between waypoint 5,6. Read my first question above :helpsmilie: Thanks There's no fire suppression system that you actively control. It engages automatically, such that it is. The best thing to do, in the case of something like an engine fire, is to shut the engine down. Of course, ejecting is always an option, too. :) YouTube Channel: https://www.youtube.com/channel/UCU1...CR6IZ7crfdZxDg _____ Win 11 Pro x64, Asrock Z790 Steel Legend MoBo, Intel i7-13700K, MSI RKT 4070 Super 12GB, Corsair Dominator DDR5 RAM 32GB.
Weta43 Posted March 27, 2018 Posted March 27, 2018 My personal experience echoes Ironhand's - that if you shut that engine down & close the throttle, usually the fire will go out (though I think the voice message will continue until you cancel it). Cheers.
Pickle72 Posted March 27, 2018 Author Posted March 27, 2018 Good info. Thanks guys. I am sure I will get a chance to practice this tonight :) T-16000M FCS | Track IR5 | Quest 2 | ASROCK Z370 | i7-8700k | GTX1080-OC | 32GB DDR4 | Windows 10 | OSX High Sierra for real work Hack build
esb77 Posted March 28, 2018 Posted March 28, 2018 Another tip that used to work back in the 1.2 era, haven't tried it lately, is that you can use the dump fuel command to empty the tanks. This is handy in the case where you're on fire enough that engine shutdown won't stop the fire. Most particularly in cases where the plane is controllable otherwise and you can make it to an airbase with repairs. If you land with a burning plane and request repairs the plane will often explode from fire before being repaired. If you run to 0 fuel right about at touchdown after 30 seconds or so the fires will go out, presumably due to lack of fuel. It's more "game mechanic" than simulation I suspect, but I've done it several times at least in the 25T and maybe once or twice in the 25? The best part of course, is the feeling of accomplishment when you've managed to time the fuel dump and your approach so that the engines die when your approach is on speed, on slope, just as you cross the runway threshold. Callsign "Auger". It could mean to predict the future or a tool for boring large holes. I combine the two by predictably boring large holes in the ground with my plane.
Recommended Posts