Jump to content

Recommended Posts

Posted

When I use a mission starting in the air, I can fire the rockets without a problem. But when the mission starts with take-off, the rockets won't fire. Here is what I do:

1. open the cover of the Dogfight/Resurm Search Switch

and set the switch to the upper position.

2. set the corresponding armament position select switches to upper position

3. Set the external stores selector to Rockets

4. set the AN/ASG-31 switch to manual

When I push the Weapon Release button a kind of TV image shows up on the right (same as when gun trigger first detent is activated), and that's it.

What am I missing?

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted
Here is what I do:

1. open the cover of the Dogfight/Resurm Search Switch and set the switch to the upper position.

 

There is no such switch located under cover in F-5E that I know of. There is Dogfight/Resurm Search Switch located on the stick but it is not under cover.

 

What you are opening and setting to upper position is probably Guns/Missile, and Camera Switch which is under red cover on the armament panel.

If you do this your A/G weapons wont work. Leave that switch in the middle and capped.

Posted

What you are opening and setting to upper position is probably Guns/Missile, and Camera Switch which is under red cover on the armament panel.

you are right. That's the switch I set to the up position.

Re your advice:

"If you do this your A/G weapons wont work. Leave that switch in the middle and capped."

Will try tomorrow.

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted (edited)

What you are opening and setting to upper position is probably Guns/Missile, and Camera Switch which is under red cover on the armament panel.

If you do this your A/G weapons wont work. Leave that switch in the middle and capped.

I have tried with 2 different missions. Whether the switch "Guns, Missile & Camera" is in the upper or middle position has absolutely no effect on the (M151) rockets. It must be in the Up position for all gun use, incl. A/G.

Edit:

I have tried several missions now, and only one of them gave me the problem with the rockets. I've not yet found out what makes the difference.

Edited by LeCuvier

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted

Interesting, I fly F-5 a lot, and that is yet to happen to me.

Ill check some weapon configurations later tonight.

Post track of your unsuccessful attempts to fire if you can.

Posted
Interesting, I fly F-5 a lot, and that is yet to happen to me.

Ill check some weapon configurations later tonight.

Post track of your unsuccessful attempts to fire if you can.

I had modified the mission where I had the problem, and now I cannot reproduce it any more. Will post if and when I run into it again.

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted

OK, Ive tried some configurations with switches and circuit breakers last night.

If you have CBs for weapons stations - WPN PWR LEFT(RIGHT) INB(OUTB) and WPN PWR CENTER LINE pulled out (they are located in front of the stick) weapons on corresponding stations wont work.

Also if you have the switch for SELECT JETTISON in positions other than OFF weapons wont fire.

Otherwise it always worked for me.

Posted

Luckily I found a copy of the mission that shows the problem. Note 1: the saved mission has no rockets. I added 2 * 19 M151 on the inner wing pods with the mission planner. Note 2: this mission starts on the ground.

In this mission, a group of 4 MIG-21bis must be defeated before you can attack the 4 MLRS. I managed to survive (letting my AI wingmen do the dangerous work) and flew to the Smerchs' location after configuring my weapon controls for the rockets. I made at least 2 runs trying to fire the rockets, but they just won't fire. Only the TV picture came up when I pressed the Weapon Release button.

In the end I got tired of trying and destroyed the Smerchs with the gun.

I did save the track; but unfortunately when I replayed it, it showed pure nonsense. So the track is useless. I attach the mission so you can try to reproduce the problem. Don't forget to add the rockets in Mission Planner!

F-5E vs Mig-21bis Furball_Test.miz

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted

All weapons work fine in the mission for me. One thing I remembered fighting those 21s though.

Before engaging ground targets after A/A engagement be sure you are not in DM/DG modes (deselect the modes by pressing return to search).

If so and attacking ground targets you would even fire your AIM-9 missiles if you still had them on, or not fire at all.

Might be what troubles you, might not, but if properly configured all weapons work fine for me.

Posted

Before engaging ground targets after A/A engagement be sure you are not in DM/DG modes (deselect the modes by pressing return to search).

I might have made that mistake. Will try. Thanks Golo!

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted

it's getting worse. Now, I can't even fire missiles any more. And when I enable gun and missiles, the grumble of the AIM-9 starts with a significant delay. I thing the module is broken. I ran a repair, but without effect. Maybe I should delete the files in the ...\Bin folder and run a repair again?

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Posted

It's solved. There was a serious cockup in control bindings. I cleaned that all up, and now it's working as expected-

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...