iVVChewy9141VVi Posted April 28, 2018 Posted April 28, 2018 Can i use multiply BU0836X? Will the computer recognize 2 separate ones? I will be using switches that don't require me to edit the LUA (On-On and (On)-off-(On)) This is why i ask this will DCS and computer recognize each BU0836X if i have 2 connected to a powered hub
mr_mojo97 Posted April 28, 2018 Posted April 28, 2018 Yep, I used 4 at the same time when I had my A-10C pit. MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |
iVVChewy9141VVi Posted April 28, 2018 Author Posted April 28, 2018 (edited) Thanks so much. Quick question do you have to edit anything so they don't get mixed up inside the game? Is it safe to use 4 BU0836X with say switches that i don't need to edit the LAU? ! If i don't want to edit the LAU i would use (On)-Off-(On) and On On switches? Also last question can i connect say for the On-On switch can i connect the both On and On part of the switch to B1 and then ground to the ground? Is this safe to have connected for something that requires say to turn on APU press (Ctrl-A) and to turn it off press (Ctrl- A). Edited April 28, 2018 by iVVChewy9141VVi
bnepethomas Posted April 29, 2018 Posted April 29, 2018 One of the nice things is you can load firmware to give each controller a unique name, makes identification a little easier. cheers Peter Thanks so much. Quick question do you have to edit anything so they don't get mixed up inside the game? Is it safe to use 4 BU0836X with say switches that i don't need to edit the LAU? ! If i don't want to edit the LAU i would use (On)-Off-(On) and On On switches? Also last question can i connect say for the On-On switch can i connect the both On and On part of the switch to B1 and then ground to the ground? Is this safe to have connected for something that requires say to turn on APU press (Ctrl-A) and to turn it off press (Ctrl- A).
Sokol1_br Posted April 29, 2018 Posted April 29, 2018 "Q. Can I plug in more than one of the same controller on my PC or MAC? A. Yes. Every controller has a unique serial number which means our devices will work alongside each other with no issues. We once tried 12 without issues but we're certain more could be connected; we just ran out of ports! :) "
Recommended Posts