Jacks Posted May 2, 2018 Posted May 2, 2018 I am trying to use JoyToKey so I can use the mini stick on my throttle to act as a TDC till the axis issue is fixed with the harrier. However, DCS does not seem to recognise any of the inputs. I have tested the inputs on word and joytokey is definitely generating keyboard outputs just not in DCS. Any ideas? System Specs: i7 8700k @ 5.0GHz (not delidded), ASRock Extreme4 Z370 MOBO, EVGA GTX 1080 SC 8GB, 32GB Corsair Vengeance LPX 3200MHz DDR4 RAM, Samsung Evo 240GB SSD, Samsung Evo 500GB SSD, 1TB HDD, Noctura NH-D15S Heat Sink, Acer VE278H 27" 1080p Monitor, Ocukus Rift CV1. Controllers: TrackIR 5, Thrustmaster HOTAS X, Saitek Throttle Quadrant (with DIY removable collective mod), Saitek Pro Flight Rudder Pedals. Just trying to keep my number of takeoffs and landings equal!
Jacks Posted May 2, 2018 Author Posted May 2, 2018 I tried that and sadly it made no difference System Specs: i7 8700k @ 5.0GHz (not delidded), ASRock Extreme4 Z370 MOBO, EVGA GTX 1080 SC 8GB, 32GB Corsair Vengeance LPX 3200MHz DDR4 RAM, Samsung Evo 240GB SSD, Samsung Evo 500GB SSD, 1TB HDD, Noctura NH-D15S Heat Sink, Acer VE278H 27" 1080p Monitor, Ocukus Rift CV1. Controllers: TrackIR 5, Thrustmaster HOTAS X, Saitek Throttle Quadrant (with DIY removable collective mod), Saitek Pro Flight Rudder Pedals. Just trying to keep my number of takeoffs and landings equal!
Sokol1_br Posted May 2, 2018 Posted May 2, 2018 How you are doing this? I set an joystick axis in Joy2Key to press a key, test with Mig-21 and work OK.
Thick8 Posted May 3, 2018 Posted May 3, 2018 (edited) I don’t know that you can use an axis as a keystroke because it’s a linear analog input as opposed to a digital on-off input. Edited May 3, 2018 by Thick8 All of my posted work, ideas and contributions are licensed under the Creative Commons - Attribution-NonCommercial 4.0 International (CC BY-NC 4.0,) which precludes commercial use but encourages sharing and building on for non-commercial purposes, ©John Muldoon
Prophet Posted May 7, 2018 Posted May 7, 2018 I could do this with Foxy, with TARGET, Sokol can do it with Joy2Key...
Prophet Posted May 7, 2018 Posted May 7, 2018 I am trying to use JoyToKey so I can use the mini stick on my throttle to act as a TDC till the axis issue is fixed with the harrier. However, DCS does not seem to recognise any of the inputs. I have tested the inputs on word and joytokey is definitely generating keyboard outputs just not in DCS. Any ideas? This seems strange. I have done similar things with Foxy for my Cougar and I know its possible with TARGET. Usually when the axis is mapped to a key, and you can confirm the key press in any number of ways... DCS doesn't really care where the command is coming from it just recognizes it as a keyboard input. I don't have the Harrier module, but when I get a chance I will confirm I can accomplish this with other modules.
GregP Posted May 8, 2018 Posted May 8, 2018 I'm just getting into the Harrier module myself, and would have come across the same need (mapping TDC to ministick); and I also use JoyToKey too, so I'll give it a shot tonight and post back here with my results.
GregP Posted May 9, 2018 Posted May 9, 2018 Presume this may be old news, but assigning the TDC Axis to the ministick in-game works just fine in 2.5.1.
Recommended Posts