FZG_Immel Posted January 5, 2019 Posted January 5, 2019 (edited) ok.. more than a long speech here is a youtube video I made of my issue . I apologize for the format but I play on a 39/9 wide monitor so it is what it is. so basically I am master arm ON, then go A/G master mode. I select the stores page and then I select the MavF. then on the other DDI I also go stores page, and now the left DDI display the OSB to do to Imav Display. But when I click on it, my DDI goes blank- same when I click on the mavF on the stores page again. Any idea ? thanks a lot ! Edited January 5, 2019 by FZG_Immel [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
FZG_Immel Posted January 5, 2019 Author Posted January 5, 2019 (edited) That is NOT it.. I have been testing it after 10min of selecting the maverick. Any idea ? Edited January 5, 2019 by FZG_Immel [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
DeathAngel1 Posted January 5, 2019 Posted January 5, 2019 It needs 2.40 min to warm. And I`ve used it without any problem, it even has greater range since the last OB update. ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
unknown Posted January 5, 2019 Posted January 5, 2019 .... Any idea ? Do you use any mods? Because i have no problems using the AGM-65F in the latest OpenBeta. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings
FZG_Immel Posted January 5, 2019 Author Posted January 5, 2019 i have some added ground object in the SavedGames/Coremods folder but thats it. also, I was initially able to use the AGM-65F... but not now. I don't know why [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
FZG_Immel Posted January 6, 2019 Author Posted January 6, 2019 (edited) I can reproduce it 100% of the times... no idea ??? I will try repairing Edited January 6, 2019 by FZG_Immel [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
FZG_Immel Posted January 6, 2019 Author Posted January 6, 2019 repairing with DCS updater Utility solved it. Thank you [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
FZG_Immel Posted January 6, 2019 Author Posted January 6, 2019 For information, the issue seemed to be caused by the modification brought to some -lua file when using the Virtual Cockpit server to set DDI's on other monitor. [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5
drallabco Posted January 10, 2019 Posted January 10, 2019 This has GOT to be it. Thank you so much for the update. This was really frustrating me. Thank you so much. So does the Maverick work if you just turn the DDIs off on VCS?
Recommended Posts