Thumper152 Posted March 3, 2019 Posted March 3, 2019 Hello, In both the manual and the cold and dark training mission during the cockpit inspection section it says to make sure both LH/RH afterburner and oil cut-off switches are on. From my experience on means "up". At no point that I can find does it every tell you to reset them. If these switches are up your mil power and afterburner lights will not illuminate and afterburners will not light during power checks. I cannot tell if the oil-cut off switch is actually doing anything as the engine will start in both positions. Is this as intended, am I missing something?
fjacobsen Posted March 3, 2019 Posted March 3, 2019 It´s an error in the training mission - these switches should not be turned on and are only used in emergencies. | i7-10700K 3.8-5.1Ghz | 64GB RAM | RTX 4070 12GB | 1x1TB M.2. NVMe SSD | 1x2TB M.2. NVMe SSD | 2x2TB SATA SSD | 1x2TB HDD 7200 RPM | Win10 Home 64bit | Meta Quest 3 |
Thumper152 Posted March 3, 2019 Author Posted March 3, 2019 Thats what I figured just wanted to put it out there to double check.
baltic_dragon Posted March 3, 2019 Posted March 3, 2019 I will fix that - the mission was built early and I didn’t notice things have changed since then. thanks! For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Recommended Posts