Sport Posted January 9, 2020 Posted January 9, 2020 Jumped into DCS and found I had no pitch control. The Y axis is no longer being detected by DCS or the VPC software. Any help with how to trouble shoot or get customer support on this? Thanks in advance! Come check me out on YouTube! Twitch! Have a listen to the Alert 5 Podcast - YOUR source for the latest combat flight simulation news!
VpR81 Posted January 10, 2020 Posted January 10, 2020 Is the Y axis detected by Windows? Then maybe a win calibration might help. If not i´d open it and check if any cables or plugs are loose. Otherwise i would suggest contacting customer support. But there was orthodox christmas last monday and they are propably on holidays. I placed an order on december 28 wich is not shipped yet... Phanteks EvolvX / Win 11 / i9 12900K / MSI Z690 Carbon / MSI Suprim RTX 3090 / 64GB G.Skill Trident Z DDR5-6000 / 1TB PCIe 4.0 NVMe SSD / 2TB PCIe 3.0 NVMe SSD / 2TB SATA SSD / 1TB SATA SSD / Alphacool Eisbaer Aurora Pro 360 / beQuiet StraightPower 1200W RSEAT S1 / VPC T50 CM2 + 300mm extension + Realsimulator F18 CGRH / VPC WarBRD + TM Warthog grip / WinWing F/A-18 Super Taurus + F-15EX / 4x TM Cougar MFD / Slaw Device RX Viper V3 / HP Reverb G2
Sport Posted January 10, 2020 Author Posted January 10, 2020 Yeah, it's not being detected at all (VPC Calibrator Software, Windows, Etc). I opened it up and checked for loose wires, none, as well as cleaned off the sensor, just in case. I'm going to open a support ticket and see what happens. Thanks for the reply Come check me out on YouTube! Twitch! Have a listen to the Alert 5 Podcast - YOUR source for the latest combat flight simulation news!
HC_Official Posted January 10, 2020 Posted January 10, 2020 best bet ... a loose bolt inside or loose connector No more pre-orders Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. .
Recommended Posts