Jump to content

Recommended Posts

Posted

Hi there, we want to know if the carrier will be able to operate in a specific area an make an anchor pattern to stay head wind (and if the wind changes). If it's the case will the carrier indicates red or green deck?

 

Thanks per advance!

Modules: Nevada, Persian Gulf, Syria, Normandie, FC3, CA, Super Carrier, A-10C, A-10C II, F/A-18C, F-16 C, F-14 B, SA342, and WWII assets.

Hardware: I7 8700K, Geforce GTX 1080Ti 11Go OC, 32Gb RAM, screen resolution 2K

Devices: Hotas Warthog, Cougar MFDs, Saitek rudder pedals, Track IR

Posted
Hi there, we want to know if the carrier will be able to operate in a specific area an make an anchor pattern to stay head wind (and if the wind changes). If it's the case will the carrier indicates red or green deck?

 

Thanks per advance!

 

Not something they have talked about (hence your question) and a great question! When ships go to flying stations they always point into the wind - the supercarrier should do the same.

F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf

 

i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080

 

Every Day, Someone Uses Cute Krispy Snacks

 

[sIGPIC][/sIGPIC]
Posted

given it can be manually controlled worst case just steer it to the wind before stopping. though it happening on its own would be good too

Posted

up

Modules: Nevada, Persian Gulf, Syria, Normandie, FC3, CA, Super Carrier, A-10C, A-10C II, F/A-18C, F-16 C, F-14 B, SA342, and WWII assets.

Hardware: I7 8700K, Geforce GTX 1080Ti 11Go OC, 32Gb RAM, screen resolution 2K

Devices: Hotas Warthog, Cougar MFDs, Saitek rudder pedals, Track IR

Posted

If it's not built in to the module, Wrench created a script you can use to accomplish that. You can find it here and it works beautifully.

Very Respectfully,

Kurt "Yoda" Kalbfleisch

San Diego, California

"In my private manual I firmly believed the only time there was too much fuel aboard any aircraft was if it was fire." --Ernest K. Gann

 

Posted
If it's not built in to the module, Wrench created a script you can use to accomplish that. You can find it here and it works beautifully.

 

The videos are looking good.

 

Look forward to farther improvements. Will it can be integrated some function such as giving orders to the carrier via F10 view?

Posted

Sonoda Umi,

 

Yes, there is already provision for giving the carrier orders via the F10 menu, including getting it to tell you the Base Recovery Course, launch the 'alert' S-3B tanker, and turn into the wind immediately.

 

Set up properly and left to itself, Wrench's script will have the carrier turn into the wind at a set interval of time, maintain heading into the wind for a time, and then steam downwind to the spot where it started. I've been using it for a while, and it supports 1+15 and 1+30 launch cycles perfectly.

Very Respectfully,

Kurt "Yoda" Kalbfleisch

San Diego, California

"In my private manual I firmly believed the only time there was too much fuel aboard any aircraft was if it was fire." --Ernest K. Gann

 

Posted
Sonoda Umi,

 

Yes, there is already provision for giving the carrier orders via the F10 menu, including getting it to tell you the Base Recovery Course, launch the 'alert' S-3B tanker, and turn into the wind immediately.

 

Set up properly and left to itself, Wrench's script will have the carrier turn into the wind at a set interval of time, maintain heading into the wind for a time, and then steam downwind to the spot where it started. I've been using it for a while, and it supports 1+15 and 1+30 launch cycles perfectly.

 

It works good.

 

P.S. My "F10 view" means F10 map mode.:P

Posted
P.S. My "F10 view" means F10 map mode.:P

 

Heh. I misread that. :music_whistling:

Very Respectfully,

Kurt "Yoda" Kalbfleisch

San Diego, California

"In my private manual I firmly believed the only time there was too much fuel aboard any aircraft was if it was fire." --Ernest K. Gann

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...