nickthorne Posted August 25, 2020 Posted August 25, 2020 Hi ,Pretty new to VR, and wondering if any one could advise at all please. I have updated to latest version of DCS (2.5.6..) and also installed Kegety's shader mod in readiness. My first observation is that when in sitting in the cockpit before even starting up, just looking around is quite jerky, is the cockpit frames and dials etc do not move smoothly in the view when moving my head around. When trying free flight, the outside visuals are not jerky and the frame rate is very acceptable. It literally seems to be the "looking around" that's stuttery. Specs: Oculus Rift I5 9600k stock GTX 1070 16gb ddr ram Module is Spitfire MK IX. I've got PD set at 1.5. Appreciate any ideas?
rrohde Posted August 25, 2020 Posted August 25, 2020 In DCS Settings, you should try and select the VR preset and see if that gets you better performance as a starting point. You can then increase settings to see how far you can push the game details vs VR performance. Starting out with VR is always a balancing act between the look you're used to on a monitor vs acceptable performance. PC: AMD Ryzen 9 5950X | MSI Suprim GeForce 3090 TI | ASUS Prime X570-P | 128GB DDR4 3600 RAM | 2TB Samsung 870 EVO SSD | Win10 Pro 64bit Gear: HP Reverb G2 | JetPad FSE | VKB Gunfighter Pro Mk.III w/ MCG Ultimate VKBcontrollers.com
dburne Posted August 25, 2020 Posted August 25, 2020 Reduce Pixel Density to around 1.2 for your rig. No more than 2x MSAA. Did you try it before installing the Mod? Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|
nickthorne Posted August 25, 2020 Author Posted August 25, 2020 Reduce Pixel Density to around 1.2 for your rig. No more than 2x MSAA. Did you try it before installing the Mod? I did . Looking around was the same.
Recommended Posts