Jump to content

OpenBeta 2.5.6.55960 often crash

Mercury_1965

By Mercury_1965
in Game Crash

 Share

Recommended Posts

Flappie

Flappie

Posted
Posted

Hi, you seem to have an issue between DCS and your graphics card (DXGI_ERROR_DEVICE_REMOVED). It can be due to overclocking or sometimes to a misplacement of the gfx card in its slot. Do you have an overclocked GPU or an overlocked RAM?

 

You also appear to have a very small pagefile (less than 5 GB). You should try customizing Winfows pagefile, 16 GB min, 32 GB max.

 

2020-10-08 01:35:44.162 INFO EDTERRAINGRAPHICS41: surface5 gc() LOD 0 71 squares

2020-10-08 01:35:44.163 INFO EDTERRAINGRAPHICS41: surface5 gc() LOD 1 71 squares

2020-10-08 01:35:44.163 INFO EDTERRAINGRAPHICS41: surface5 gc() 3.553500 ms

2020-10-08 01:35:45.808 INFO TACVIEW.DLL: Recording flight data in [C:\Users\gmv\Documents\Tacview\Tacview-20201008-033546-DCS-AMVI-DCS-Preselezione.zip.acmi]

2020-10-08 01:45:39.127 INFO TACVIEW.DLL: During the last 600.0s an average of 0 units objects and 0 ballistic objects have been active per frame

2020-10-08 01:45:39.127 INFO TACVIEW.DLL: The average frame rate of 57.3fps would have been 57.6fps if the flight data recorder was disabled

2020-10-08 01:45:39.127 INFO TACVIEW.DLL: DCS World simulation is taking 99.4% of CPU

2020-10-08 01:45:39.127 INFO TACVIEW.DLL: DCS GetWorldObjects is taking 0.2% of CPU

2020-10-08 01:45:39.127 INFO TACVIEW.DLL: Tacview recorder is taking 0.5% of CPU

2020-10-08 01:52:12.389 ERROR DX11BACKEND: DX device removed. Reason: 0x887A0006

2020-10-08 01:52:12.511 WARNING LOG: 18 duplicate message(s) skipped.

2020-10-08 01:52:12.511 ERROR DX11BACKEND: failed to create vertex buffer. Reason: DXGI_ERROR_DEVICE_REMOVED

2020-10-08 01:52:12.511 ERROR DX11BACKEND: Failed assert `false && "failed to create vertex buffer"` at Projects\render\dx11backend_win8\Source\DX11BufferManager.cpp:379

2020-10-08 01:52:12.511 ERROR DX11BACKEND: failed to create const buffer. Reason: DXGI_ERROR_DEVICE_REMOVED

2020-10-08 01:52:12.511 INFO EDCORE: try to write dump information

2020-10-08 01:52:12.513 INFO EDCORE: # -------------- 20201008-015212 --------------

2020-10-08 01:52:12.514 INFO EDCORE: DCS/2.5.6.55960 (x86_64; Windows NT 10.0.19041)

2020-10-08 01:52:12.516 INFO EDCORE: C:\WINDOWS\SYSTEM32\d3d11.dll

2020-10-08 01:52:12.517 INFO EDCORE: # C0000005 ACCESS_VIOLATION at 96C19890 00:00000000

2020-10-08 01:52:12.519 INFO EDCORE: SymInit: Symbol-SearchPath: '.;C:\Program Files\Eagle Dynamics\DCS World OpenBeta;C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin;C:\WINDOWS;C:\WINDOWS\system32;SRV*C:\websymbols*http://msdl.microsoft.com/download/symbols;', symOptions: 530, UserName: 'gmv'

2020-10-08 01:52:12.521 INFO EDCORE: OS-Version: 10.0.19041 () 0x100-0x1

2020-10-08 01:52:12.926 INFO EDCORE: 0x0000000000129890 (d3d11): CreateDirect3D11SurfaceFromDXGISurface + 0x10200

2020-10-08 01:52:12.927 INFO EDCORE: 0x000000000000ACC9 (dx11backend): RenderAPI::DX11Renderer::useTesselatorStage + 0x4BB9

2020-10-08 01:52:12.927 INFO EDCORE: 0x000000000006A667 (Effects2): ed::Random::genInt + 0x391F7

2020-10-08 01:52:12.927 INFO EDCORE: 0x00000000000625CB (Effects2): ed::Random::genInt + 0x3115B

2020-10-08 01:52:12.927 INFO EDCORE: 0x000000000002E29A (Effects2): Effects::OParticleSystem::~OParticleSystem + 0x10A

2020-10-08 01:52:12.927 INFO EDCORE: 0x000000000002EBF1 (Effects2): Effects::OParticleSystem::init + 0x281

2020-10-08 01:52:12.927 INFO EDCORE: 0x0000000000049E49 (Effects): Effects::GraphicEffect_Impl::undock + 0x147F9

2020-10-08 01:52:12.928 INFO EDCORE: 0x0000000000033320 (Effects): Effects::release_effects + 0x2AA0

2020-10-08 01:52:12.928 INFO EDCORE: 0x0000000000033566 (Effects): Effects::release_effects + 0x2CE6

2020-10-08 01:52:12.928 INFO EDCORE: 0x00000000003C545A (DCS): CoreUtils::TempFilesManager::operator= + 0x5782A

2020-10-08 01:52:12.928 INFO EDCORE: 0x00000000003F0DE5 (DCS): CoreUtils::TempFilesManager::operator= + 0x831B5

2020-10-08 01:52:12.929 INFO EDCORE: 0x00000000003FD55A (DCS): CoreUtils::TempFilesManager::operator= + 0x8F92A

2020-10-08 01:52:12.929 INFO EDCORE: 0x00000000006749C5 (DCS): CoreUtils::TempFilesManager::operator= + 0x306D95

2020-10-08 01:52:12.929 INFO EDCORE: 0x000000000002F268 (FMBase): EagleFM::EffectManager::dequeue + 0x38

2020-10-08 01:52:12.929 INFO EDCORE: 0x000000000067C459 (DCS): CoreUtils::TempFilesManager::operator= + 0x30E829

2020-10-08 01:52:12.930 INFO EDCORE: 0x000000000050C357 (DCS): CoreUtils::TempFilesManager::operator= + 0x19E727

2020-10-08 01:52:12.930 INFO EDCORE: 0x0000000000510306 (DCS): CoreUtils::TempFilesManager::operator= + 0x1A26D6

2020-10-08 01:52:12.930 INFO EDCORE: 0x0000000000003B94 (World): wSimTrace::CommandsTraceDiscreteIsOn + 0x504

2020-10-08 01:52:12.930 INFO EDCORE: 0x000000000000403D (World): wSimCalendar::DoActionsUntil + 0x1FD

2020-10-08 01:52:12.930 INFO EDCORE: 0x0000000000711B7F (DCS): CoreUtils::TempFilesManager::operator= + 0x3A3F4F

2020-10-08 01:52:12.931 INFO EDCORE: 0x00000000007243D3 (DCS): CoreUtils::TempFilesManager::operator= + 0x3B67A3

2020-10-08 01:52:12.931 INFO EDCORE: 0x00000000006F6604 (DCS): CoreUtils::TempFilesManager::operator= + 0x3889D4

2020-10-08 01:52:12.931 INFO EDCORE: 0x00000000006F69C9 (DCS): CoreUtils::TempFilesManager::operator= + 0x388D99

2020-10-08 01:52:12.931 INFO EDCORE: 0x00000000016E8CEB (DCS): AmdPowerXpressRequestHighPerformance + 0xB1ACE7

2020-10-08 01:52:12.931 INFO EDCORE: 0x00000000008E261E (DCS): CoreUtils::TempFilesManager::operator= + 0x5749EE

2020-10-08 01:52:12.932 INFO EDCORE: 0x0000000000016FD4 (KERNEL32): BaseThreadInitThunk + 0x14

2020-10-08 01:52:12.932 INFO EDCORE: 0x000000000004CEC1 (ntdll): RtlUserThreadStart + 0x21

2020-10-08 01:52:13.050 INFO EDCORE: Minidump created.

---

Mercury_1965

Mercury_1965

Posted
  • Author
Posted

Hi Flappie,

I increased the page file to 16GB.

My graphic card is AMD Radeon RX 5700 XT (8GB) I use the las Adrenalin (Radeon software) setting tuning in Automatic -Default mode VRam clock speed is 200Mhz in quiet mode when DCS is running the clock speed increase to 1.750Mhz the max frequency is 1.900Mhz.

 

 

 

I will check anyway the graphic card slot.

Thanks

Flappie

Flappie

Posted
Posted

OK. Adrenalin overclocks your GPU then (base clock is 1605 MHz). If you keep having these crashes despite a 16 GB pagefile and after checking out the slot, please try disabling the Adrenalin automatic overclocking function. DCS is not always keen on overclocking.

 

Let us know how your PC is doing.

---

Mercury_1965

Mercury_1965

Posted
  • Author
Posted

Hi Flappie,

now I'm like this:

- page file 16GB (I can go to 32GB it's better ?)

- Adrenalin in Autotuning "Default" so no extra Overclock GPU neither Overclock VRAM

 

DCS is running on 4K monitor at 30FPS I enclose the graph setting, if uou have any suggestion to speed a bit ..

 

I tried some mission and all is right .. apparently.

 

I will try soon the exaclty mission where DCS cashed and I will

update you.

Settings.thumb.png.b0cad92332dbecc0076ee3cccb9c0a26.png

Flappie

Flappie

Posted
Posted

Glad your DCS hasn't crashed yet. smile.gif

 

My W10 automatically gives a 32GB pagefile whenever I start DCS. This is probably done so because I have 32GB of RAM, ans this seems perfectly logical. Yet I see Windows acting differently to many users and I have no clue why. Often, W10 only lend 4 or 5 GB of pagefile, which seems to piss DCS quite a lot.

 

So yes, you can raise your pagefile min size to 32GB minimum (example: min size = 32GB, max size = 32 GB) as long as the SSD containing your pagefile has enough free space.

 

 

Until Syria came out, I wouldn't need to optimize my DCS much, because I play at 1920x1200px with a 1080Ti and 32GB of RAM. But now is the time for me to tweak things a little bit, since my FPS drop severely over Syria.

 

My 50 cent:

 

1/ You have a 4K resolution, which is very precise for the human eye: disable useless GPU post-processing like FXAA, Gamma correction, AA transparency, SSAA, SSLR...

 

2/ Set your graphics driver to maximize power (instead of optimizing power) and see if you get better FPS.

 

3/ Read this guide (even if it's a bit old now) if you want to tune DCS graphical options. Try and see if Motion Blur OFF and/or Shadows MEDIUM give you better FPS.

---

  • 2 weeks later...
Flappie

Flappie

Posted
Posted

OK. How often do you get stutters? Like one episode every 3 minutes, or only when you're looking at things on the ground? Are there many ground units in your missions? In solo or mulriplayer?

---

Mercury_1965

Mercury_1965

Posted
  • Author
Posted

I have not this option

 

 

In settings -> system -> display -> graphics settings the option isn't show.

nor in the register file the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\HwSchMode" not exist ...

Flappie

Flappie

Posted
Posted

I thought it would be there because your log shows you have W10 update 2004, which has introduced this new feature. And I see your PC has a recent AMD driver.

 

Have you already tried emptying both your FXO and Metashaders2 folders, so DCS can renew them? If not, give it a try please.

 

C:\Users\your_name\Saved Games\DCS\fxo

C:\Users\your_name\Saved Games\DCS\metashaders2

 

If the issue persists, please attach a screenshot of your AMD graphics settings.

---

milit

milit

Posted
Posted

Also I discovered that surface format optimisation should be off. It lowers fps without any visible improvements on my system.

=WRAG=345

R7 5800X @ 4,8 GHz; DDR4 64Gb RAM (+32Gb swap); Radeon RX 6800 16Gb; 3840x2160; Oculus Quest 3; Win10-64

 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...