bkthunder Posted June 19, 2021 Posted June 19, 2021 What is the state of the FM after the last update? Been out of the Tomcat loop for a while and getting back to it. It feels great as usual, but there are a few "open points" that I noticed/remember from previous versions: - F-14B can reach mach 1.5 without A/B at 25k feet (clean) - F-14A can't get past Mach 1-point-something above 30k feet - pitch moment vs airbrake position: the elevators should pitch up with a deployed speed brake to compensate, but this was removed a while ago as a stop-gap measure (so during start-up checks, if you open the speed brakes, there is no matching elevon deflection as there should be) - drag of different loadouts Thanks Windows 10 - Intel i7 7700K 4.2 Ghz (no OC) - Asus Strix GTX 1080 8Gb - 16GB DDR4 (3000 MHz) - SSD 500GB + WD Black FZEX 1TB 6Gb/s
Donut Posted June 19, 2021 Posted June 19, 2021 Take a look at this... https://forums.eagle.ru/topic/267546-f-14b-acceleration-correct/#comments i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"
IronMike Posted June 19, 2021 Posted June 19, 2021 Hey @bkthunder - currently the performance is undergoing a massive overhaul to finetune the last aspects and issues of underperforming, it just takes long, because many components are involved and they all depend on each other. All the above issues are being addressed with it. We just had a very lengthy discussion about this and decided to close threads around this issue for now, because we are turning in circles else. We kindly ask you for a bit patience. Once we have the changes in, we will open a new thread and inform you of all what has been done of course. Thank you for your kind understanding. Please take a look at the link Donut posted above. Thread Closed. 1 1 Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/
Recommended Posts