Question: altitud mode.

[Tarres]

In a Hover, the altitud mode can be switch on/off.

Can the altitude mode be engaged in "route mode", as a submode?

[VampireNZ]

8 hours ago, Tarres said:

In a Hover, the altitud mode can be switch on/off.

Can the altitude mode be engaged in "route mode", as a submode?

 

You 'should' be able to, but I haven't had any luck enabling Altitude while travelling with or without Route mode active.

 

 

En-Route Flight with Activated AFCS Mode Route

En-route flights with activated mode Route should be performed
in horizontal flight at altitudes from 50 up to 3,000 m and at flight speeds
from l20 km/h up to the maximum'

 

Set a selected flight path angle (SFPA) (3rr| by means of the 3nv-24
selector. Switch on the Route channel, to which end:
- stabilize the helicopter in the straight horizontal flight;
- zero the forces on the control stick by pressing the force-release
button;
- make sure that movable indices of the channels Yaw, Roll
and Pitch are in the neutral position on the autopilot control panels;
- switch on the AFCS by pressing the annunciator-button ROUTE;
as this is done, the green annunciator-button ON is to illuminate;
- switch on the channel Altitude of the autopilot and activate flight
speed hold.

 

After 10'..15 s of flight, make sure that the helicopter is stabilized
in the selected mode and continue to fly with free control.

[Tarres]

Yes, tried the same but doesn’t work.

Maybe WIP feature.

 

Thanks!