Bog9y Posted November 15, 2021 Share Posted November 15, 2021 Posting on behalf of a former AV-8B avionics engineer. He informed me that currently the duct pressure is too low for a certain check which the engineers would conduct called the "40-30-20 check". With 40% throttle set and 30 degrees nozzle you should get 20 PSI of duct pressure. Currently in DCS it shows as 4 PSI and begins to climb around 46% RPM . This check is to be found in A1-AV8BD-290-200 manual. However, for the duct pressure check with the 2/5 finger check the pressure reads correctly at 45 PSI (60% throttle and 30 degree nozzle). Not sure if it's possible to add a slightly different curve for the duct pressure indication so that duct pressure begins to climb earlier and hits these marks (at 40% and 60% for the checks) ? 1 Link to comment Share on other sites More sharing options...
AlphaJuliet Posted November 17, 2021 Share Posted November 17, 2021 Hey, Issue reported, but could take a bit before taken a look at, it's low priority compared to our other bugs. But we'll get there Cheers, Alpha 3 Link to comment Share on other sites More sharing options...
Recommended Posts