JackPinMV Posted February 23, 2022 Posted February 23, 2022 Yesterday, I started my PC everything was normal, opened DCS, and as I was waiting for DCS to load up I noticed that my warthog throttle had no lights on. I looked in the DCS controls menu and my warthog stick was present but my warthog throttle was nowhere to be found. I tried re-installing drivers but no luck, showed up as unrecognized in windows USB menu. I read up on some common issues with the PCB so I opened it up just to look around and blew some air on it and put it back together. As soon as I plugged it back in, IT WORKED! I flew around and it was completely fine. This morning I powered on my PC and it flashed the 5 dotted lights, which it has been doing since, and every once in a while the backlit LEDs will flash upon PC startup. I'm pretty sure I'm SOL and need a new PCB but just wanted some insight/tips. Thanks
GPatricks Posted February 23, 2022 Posted February 23, 2022 Have you tried different (direct to mobo) USB outlets? GIGABYTE X870E AORUS Elite WIFI7, Thermaltake 1200w PS \AMD Ryzen 7 9800X3D - Corsair iCue Titan Liquid CPU cooler \ 64GB G.Skill Z5 DDR5 \ SBlasterX G6 \ 4TB NvMe M.2 Boot Drive \ Zotac GeForce RTX 4090 Trinity 24GB - Nvidia 576.02 drivers \ 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz Gsync \ Win11 Pro Ver. 24H2 - Build 26100.3775 \ TIR 5 \ Warthog HOTAS with VirPil stick base \ MFG V3 Pedals \ TM MFDs on 2 8" Lilliputs \ Simgears ICP \ Varjo XR-3 VR
Burt Posted February 23, 2022 Posted February 23, 2022 Exactly what I was gonna ask. ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090 - XFURY 64GB -3400 MHz RAM Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia Start Date April 2020
JackPinMV Posted February 23, 2022 Author Posted February 23, 2022 I've plugged into every USB port on the motherboard as well as the front IO of my PC case, No luck. However just plugged into a desktop Mac and it lit up just like normal. I also plugged it into a windows laptop and it said it was unrecognized.
_NightWolf_ Posted March 8, 2022 Posted March 8, 2022 (edited) On 2/23/2022 at 5:44 AM, JackPinMV said: Yesterday, I started my PC everything was normal, opened DCS, and as I was waiting for DCS to load up I noticed that my warthog throttle had no lights on. I looked in the DCS controls menu and my warthog stick was present but my warthog throttle was nowhere to be found. I tried re-installing drivers but no luck, showed up as unrecognized in windows USB menu. I read up on some common issues with the PCB so I opened it up just to look around and blew some air on it and put it back together. As soon as I plugged it back in, IT WORKED! I flew around and it was completely fine. This morning I powered on my PC and it flashed the 5 dotted lights, which it has been doing since, and every once in a while the backlit LEDs will flash upon PC startup. I'm pretty sure I'm SOL and need a new PCB but just wanted some insight/tips. Thanks Hi JackPinMV, I had EXACTLY your same problem. The "motherboard" of the throttle is gone. You should contact TM customer service and buy a new one...they are going to send the new motherboard and you just put the new one into the older one position. You just open the throttle (it is very easy, I did it by myself and believe I am denied for these things) and switch the new motherboard with the old one. As cost I remember around 80euros with shipment. Edited March 8, 2022 by _NightWolf_
Bex Posted July 2, 2022 Posted July 2, 2022 (edited) I want to share my experience. Recently my Warthog Throttle failed as well. Here are the features: windows 11 1. Joystick was shown as a USB device but not recognized as a throttle. 2. LED lights were off. 3. Driver installation and troubleshooting PDF from Thrustmaster did not help. Linux: For reference whether the joystick is recognized at all, I tried it in Query Linux. It showed the Thrustmaster name and Port had no LED lights either. The length of time solving the problem: Sun 19.6. / 9 a.m. - Thrustmaster Support contacted. (The support is very nice.) Th 30.6 / 1 p.m. - HOTAS WARTHOG THROTTLE MAIN PCB arrived very well packaged in a bubble envelope. Costs: Payment is via Paypal only Board €36.74 Standard shipping to germany: 8.63€ Express shipping to germany: 16.81€ Shipping from France via „La Poste“ Thrustmaster requires: >Telephone number/email address/first name+last name/street+street number/if applicable company name/zip code+city/country >Photo of the cable Label with product name + serial number (both sides of the label) >Confirmation of payment via Paypal. They send a PDF explaining the payment. Changing the circuit board is very easy: >5 screws on the bottom. >2 panels are loosened. >Loosen the circuit board with 4 screws and carefully lift it off. >Is connected to a circuit board underneath with a plug contact. >I unplugged each cable individually and plugged it into the new board. >Press the new circuit board back onto the plug contact and screw it in. >Pay attention to the grounding when screwing on the base plate. >I guided it in the hole with the screwdriver and pressed the bottom plate so that it didn’t slip away. >screw up. ..........Connect. Throttle is recognized again. Problem solved. Edited July 2, 2022 by Bex
Recommended Posts