WMundstock Posted November 8, 2023 Posted November 8, 2023 13 hours ago, ChillNG said: The campaign is fairly heavy in performance demand as it's very detailed, but having said that it sounds like you're having a bigger impact than most, most issues I'm aware of (pre multi threading) were in VR. Few things worth mentioning to check and be aware of. Incirlik, especially the shelters, are not a great area for performance...that's just a Syria map thing. Once away from the base things settle down a lot more. Hopefully you're running the multi threading version, if not I would advise to do so as the high unit counts in the campaign benefit from this. If you use TACVIEW then try disabling it, TACVIEW takes CPU resources and this is made worse with the amount of things it has to track in the campaign. Finally if you have any Win-wing devices then disable the scripts they use in DCS as these are real performance hogs. Thanks for the quick response. I am not sure if it was running the MT option. I removed the icon and launched again ensuring MT is selected. I have already disabled TACVIEW. I do not have winwing devices, but I do use DCS BIOS (older version). Do you think DCS BIOS could have anything to do? ---------------- In general inside the shelter I am getting around 20FPS. I had the settings on high, and as a result you see the HW usage as attached. As you can see memory is almost 100%, which may be part of the problem, however there does not seem to have any paging happening on the disks. I will try lowering textures and other settings to check again. Also I will give it a shot and move around in the scenario to see if it gets better once I get out from the shelter. Thank you!
WMundstock Posted November 8, 2023 Posted November 8, 2023 17 minutes ago, WMundstock said: I do not have winwing devices, but I do use DCS BIOS (older version). Do you think DCS BIOS could have anything to do? Just to keep the history, I will not edit my previous post, I will just add up in bold here: DCS Bios was the reason for the issues. I had version DCS-BIOS Version: v0.10.0+64 (21e288cdeb95f54d1b5c4935fde9e51ae3c58965). I removed the DCS BIOS code from export.lua and now I get 35-45 FPS inside the hangar. Totally playable now. I do like DCS Bios so I will try the Skunkworks fork which I just recently learned about. https://github.com/DCS-Skunkworks/dcs-bios. If that works well I will post here to let others know.
ChillNG Posted November 8, 2023 Posted November 8, 2023 1 hour ago, WMundstock said: Just to keep the history, I will not edit my previous post, I will just add up in bold here: DCS Bios was the reason for the issues. I had version DCS-BIOS Version: v0.10.0+64 (21e288cdeb95f54d1b5c4935fde9e51ae3c58965). I removed the DCS BIOS code from export.lua and now I get 35-45 FPS inside the hangar. Totally playable now. I do like DCS Bios so I will try the Skunkworks fork which I just recently learned about. https://github.com/DCS-Skunkworks/dcs-bios. If that works well I will post here to let others know. Brilliant, glad you got to the bottom of it. Thanks for the info!
Recommended Posts