Jump to content

white noise in radios after cold start


Go to solution Solved by sirrah,

Recommended Posts

Posted (edited)

If I do a cold start in the AH-64D and use the radios there is a lot of white noise there and I can barely hear the ATC (it is very quiet). The squelch buttons on the right panels seems not to work at all. This is not the case in a hot start mission. Any ideas?

Got it: you have to push ALL squelch switches to get rid of the noise not just that one for VHF. 

Edited by Nereid

DCS:A-10C / DCS:Ka-50 / DCS:UH-1H / DCS:Mig21bis / DCS:P-51D / DCS:Mi-8MTV2 / DCS:Fw190D9 / DCS:Bf109K4 / DCS:C-101EB / DCS:L-39C / DCS:F-5E / DCS:Spitfire LF Mk. IX / DCS:AJS37

  • Solution
Posted
1 minute ago, Nereid said:

If I do a cold start in the AH-64D and use the radios there is a lot of white noise there and I can barely hear the ATC (it is very quiet). The squelch buttons on the right panels seems not to work at all. This is not the case in a hot start mission. Any ideas?

The squelch buttons do work, at least they do on my end (latest OB). Make sure to flip them all (up) and the noise is gone.

 

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3

 

~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH

Posted
3 minutes ago, sirrah said:

The squelch buttons do work, at least they do on my end (latest OB). Make sure to flip them all (up) and the noise is gone.

 

Yes, I found this myself a few minutes ago. Unfortunately most if not all cold start tutorials skip this part (even Matts cold start) and in some the switches stay in postion what they not seem to do in the current build.

DCS:A-10C / DCS:Ka-50 / DCS:UH-1H / DCS:Mig21bis / DCS:P-51D / DCS:Mi-8MTV2 / DCS:Fw190D9 / DCS:Bf109K4 / DCS:C-101EB / DCS:L-39C / DCS:F-5E / DCS:Spitfire LF Mk. IX / DCS:AJS37

Posted
4 minutes ago, Nereid said:

Yes, I found this myself a few minutes ago. Unfortunately most if not all cold start tutorials skip this part (even Matts cold start) and in some the switches stay in postion what they not seem to do in the current build.

I think the switches automatically flip back to center since last OB update. (I assume that this is correct/realistic)

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3

 

~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH

Posted
vor 18 Minuten schrieb sirrah:

I think the switches automatically flip back to center since last OB update. (I assume that this is correct/realistic)

afaik yes they are spring-loaded to center position but will "remember" last setting. It has been discussed that it would also be realistic that in DCS AH64 squelch will be set to "always on". maybe we will see an special settings option for it or an ME option for each aircraft. Maybe it will stay the way it is 😉

K

Posted

Similar topic.

Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64)
Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR
>>MY MODS<< | Discord: Devrim#1068

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...