Joystik Thrustmaster Warthog help

[PLUTON]

My joystik thrustmaster warthog not recognized by DCS since I unplugged it for 2 days then plugged it back in, it no longer appears in the control settings and no longer works during the flight,
Anyone have an idea about the problem?
To know that since I bought the UFC 1 & the take-off aid from Winwing which works very well for them, is there a connection?
Thanks in advance for any help you can give me.

[tomcat_driver]

Is it connected to a USB Hub? If so, try connecting it directly to the PC to see if it works.

[PLUTON]

first of all thank you for your answer
yes I connected it directly to the pc but that does not change
my pc recognizes and configures my stick, it works Because I checked the driver and the window indicated to me (didn't detect any problem

In addition, as I have DCS OB and DCS Stable, the problem occurs in both versions.

[tomcat_driver]

Have you tried "Rescan Devices" from DCS' control config menu?

[PLUTON]

no but what should I do with rescan devices?
because when I press it nothing happens.
I deactivated everything and just reinstalled the rudder pedals (dear thrustmaster, the hotas warthog throttle and hotas warthog joystik, the first two are in the commands configuration in DCS but joystik does not appear there

[tomcat_driver]

Just now, PLUTON said:

no but what should I do with rescan devices?
because when I press it nothing happens.
I deactivated everything and just reinstalled the rudder pedals (dear thrustmaster, the hotas warthog throttle and hotas warthog joystik, the first two are in the commands configuration in DCS but joystik does not appear there

Try a slow DCS full repair. If you say that windows recognizes it then its probably not a physical problem, nor a problem with the OS. "Next" is application.

[PLUTON]

ok I will do that (slow repair) but what I find odd is that both versions of DCS (ob & stable have the same problem)
I'll let you know thank you

[PLUTON]

here is the slow update is finished and still no stik in the DCS list

[PLUTON]

And would a system restore work or not?

[tomcat_driver]

Out of curiosity, do you see a horizontal scroll bar at the bottom of the screen? 

[PLUTON]

Forgive me I've been away all day
when you talk about this bar at the bottom of the screen! are you talking about the control settings screen?

[Lange_666]

On 1/19/2023 at 2:06 PM, PLUTON said:

my pc recognizes and configures my stick, it works Because I checked the driver and the window indicated to me (didn't detect any problem

Can you give some extra info on the phrase in red because i don't understand what you mean and how you "checked the driver and the window indication"?
You mean it's still detected by the Windows Device manager?
Any other game installed you can try the Warthog on?
If you go to C:\Users\Your Name\Saved Games\DCS\Config\Input do you have a disabled.lua there (on the bottom of the list). If yes, what's in it?
 

[PLUTON]

local disabled = {
	["devices"] = {
	},
	["pnp"] = true,
}
return disabled

THIS IS WHAT YOU ASKED MRS  Lange_666

disabled.lua

[Lange_666]

Ok, nothing disabled.
What about my 2 other questions?

[PLUTON]

Ha yes that means that in device manager I right click on Hotas Warthog Joystik in the window I click again on property this window tells me that this device is working correctly and yes it is detected except in DCS

For the moment no other games where I can try the joystik, I would have to download one but I don't know which one

[PLUTON]

by the way thank you for your help

[Lange_666]

More to try:

Go Devices and Printers in the Windows Control Panel.
Select either stick or throttle, right click, select Game Controller Settings, select either stick or throttle again in there, select Properties and see if the stick/throttle reacts to inputs.

Edited January 20, 2023 by Lange_666

[PLUTON]

I just did what you asked me, on the trotle (gas) I was able to access the parameters of the game controllers and it is in the list with the pedals, the mfds, the ufc all those I have except the joysti who is not on the list.
as for the joystik I do not have access to the game settings

i downloaded via steam falcon 4
in free trial it recognizes the pedals and the trottle, which can be configured but the stik does not appear either

[Lange_666]

Since you didn't mention you uninstalled and re-installed (reboot in between) the Warthog drivers you could give that a try.
More to try: open up the stick,s base, looking for a (partly) disconnected plug, faulty USB wire/connection, stick to base connection etc...
 

[tomcat_driver]

13 hours ago, PLUTON said:

Forgive me I've been away all day
when you talk about this bar at the bottom of the screen! are you talking about the control settings screen?

I can't take a screenshot to show cause I happen to just recently disable a bunch of unused vJoy devices and the roll bar is not showing.

When you have too many devices and not enough screen resolution to display all of the detected devices in the same page, DCS' UI provides a horizontal scroll bar at the bottom of the controls menu. It *can* happen that one misses it and some devices are left hidden outside to the right of the screen.

 

Edit.

Edited January 21, 2023 by tomcat_driver

[Lange_666]

But even then the axis of the stick should work since they are setup by default.
+ No stick on the Control Panel / Devices and Printers (but the throttle is present) and Falcon 4.0 doesn't see it either.

[PLUTON]

Hello sir here I am again
for (lange) I will recheck all the USB sockets to see if there is a problem,
for (tomcat_driver) no I no longer have this bar, but what I find odd now that you are talking to me about this one is that before I have always had this bar since the beginning of DCS is now that I no longer have any peripherals plug in there is no longer.
(There is rudder pedal/hotas Warthog Throttle/ 3 mfd Thrustmaster/Winwing UFC 1+ HUD 1/Winwing F18 Takeoff Panel/Mouse/)

with this there should be this bar

[Lange_666]

38 minutes ago, PLUTON said:

for (lange) I will recheck all the USB sockets to see if there is a problem,

I was not referring to USB sockets on your computer (i guess you swapped the stick around already to rule that out) but the USB connection of the stick itself, also check internally in the sticks base.

Edited January 21, 2023 by Lange_666

[PLUTON]

Question,
  in the human machine interface of the device manager, I see the rudder pedals and hotas warthog joystik bulk but not normal warthog trottles?
And why it is marked bulk at the end of the designation of the stick
(Thrustmaster Hotas Warthog Joystik Bulk)

Ha ok I did not understand I will check

[Lange_666]

I have no clue.
None of HID entry ever carried the name of the device they are connected too and even if i look into detail or events i only have USB/VID number and other data, never the device name.

 

nullnull