nazradu Posted June 13, 2023 Share Posted June 13, 2023 (edited) On the Enigma server I noticed that at around 700 m asl, with Hot-3, 35 % fuel and 85 torque you will not exceed 20 m agl. You are almost at power limit, as you cant aplly more than 90 torque at take off. In SP with the same load out set in mission editor and at the same weather conditions you have 200 m/m climb rate. With the said load out plus a recon group, you can't even get out of ground effect in the vertical. Landing with these conditions will almost always lead into a settle with power state and cause crashes. The only way to recreate the performance of the server in SP is by adding 200 kg internal cargo in ME. After some further testing I came to the conclusion, that defueling in the mission does not reduce weight, while setting it in ME does. Here is a video to demonstrate. Regard the performance differences when fuel is set in ME Edited June 13, 2023 by nazradu 1 Link to comment Share on other sites More sharing options...
Kinkkujuustovoileipä Posted June 13, 2023 Share Posted June 13, 2023 Will look into this. Link to comment Share on other sites More sharing options...
Kinkkujuustovoileipä Posted June 13, 2023 Share Posted June 13, 2023 Fixed, will be pushed in next Gazelle update. 3 2 Link to comment Share on other sites More sharing options...
nazradu Posted June 13, 2023 Author Share Posted June 13, 2023 9 minutes ago, Kinkkujuustovoileipä said: Fixed, will be pushed in next Gazelle update. Awesome. On a side note, it is the same for refueling in mission. Checked fuel consumption. That does affect weight. If the figures are correct is beyond my scope and will of testing P.S. nice to see, that your UH-60 adventure did drive you to Polychop. 1 Link to comment Share on other sites More sharing options...
Enigma89 Posted June 13, 2023 Share Posted June 13, 2023 1 hour ago, Kinkkujuustovoileipä said: Fixed, will be pushed in next Gazelle update. Thanks King Link to comment Share on other sites More sharing options...
nazradu Posted June 23, 2023 Author Share Posted June 23, 2023 (edited) On 6/13/2023 at 10:00 PM, Kinkkujuustovoileipä said: Fixed, will be pushed in next Gazelle update. Patch has applied thge changes, but defueling in mission does not reduce the same amount of weight, as setting fuel in ME. See this video. Test: Pad location 680 m asl, 24 ° C - start mission with 4 x HOT 3 and 100 % fuel - apply max torque available (85) - Heli climbs to 4 ft agl - reduce fuel to 50 % via ground crew - apply max torque available (85) - Heli climbs to 13 ft agl - reduce fuel to 50 % via ME - apply max torque available (85) - Heli climbs to with 100 m/m out of ground effect Gazelle-weight.miz Edited June 23, 2023 by nazradu added miz that I use for testing Link to comment Share on other sites More sharing options...
Kinkkujuustovoileipä Posted June 23, 2023 Share Posted June 23, 2023 Resolved, was a separate issue regarding fuel mass. Thanks for the help, it will fix some other issues too. 2 Link to comment Share on other sites More sharing options...
JohnMclane Posted June 30, 2023 Share Posted June 30, 2023 Was this fixed in the last patch or it will be fixed in next one? 1 Link to comment Share on other sites More sharing options...
Recommended Posts