Jump to content

hellfire L model and bindings.

Rhsmd1

By Rhsmd1
in DCS: AH-64D

 Share
Go to solution Solved by corbu1,

Recommended Posts

Rhsmd1

Rhsmd1

Posted
Posted

1) how do I keep from constantly having to keep my bindings from evaporating or getting changed?

2) how do I access 114 L missles. all i ever see on the rearming page is the K type?

Floyd1212

Floyd1212

Posted
Posted

You should be seeing some preconfigured loadouts in the drop-down list that include them, but you should also be able to right click on the pylon and select them that way. 
 

Are you seeing the option to add or remove the Robbie tank in the center “pylon” selection?

  • Solution
corbu1

corbu1

Posted
  • Solution
Posted

Are you running DCS on Open Beta? Only with OB you can already use the 114L.

If you are on DCS stable you have to wait until stable version gets updatet.

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

WhiskyTango

WhiskyTango

Posted
Posted (edited)
On 6/23/2023 at 11:43 AM, Dr_Pavelheer said:

There is absolutely no reason to use stable, update to open beta and enjoy

I'll give it a try, knew it was out there, but didn't think to install that version. Thanks!

Edited by WhiskyTango
hotrod525

hotrod525

Posted
Posted (edited)
On 6/23/2023 at 2:37 PM, WhiskyTango said:

I'll give it a try, new it was out there, but didn't think to install that version. Thanks!

Yeah for newcomer it might not be "super clear" but there is 3 rules in DCS;

1 - Dont use the Steam version, for the sake of simplicity.

2 - Use OpenBeta only, it is the most up-to-date version with a "beta" tag so if things goes south, Dev have some sort of excuse.

3 - Buy Pre-Purchase and complaim about release.

Edited by hotrod525
  • Like 1
  • 2 weeks later...
pii

pii

Posted
Posted
On 6/22/2023 at 7:42 AM, Rhsmd1 said:

thanks for the reply . im using stable

You can run Open Beta release on the Stable version? Whenever I tried it you can't even see the OB modules if you're on Stable. 

pii

pii

Posted
Posted
On 6/23/2023 at 2:37 PM, WhiskyTango said:

I'll give it a try, knew it was out there, but didn't think to install that version. Thanks!

 

I believe there is no stable version, yet. If you have it installed I'll bet it's the OB version.

TheGhostOfDefi

TheGhostOfDefi

Posted
Posted
57 minutes ago, pii said:

I believe there is no stable version, yet. If you have it installed I'll bet it's the OB version.

There shure is: https://www.digitalcombatsimulator.com/en/downloads/world/

1 hour ago, pii said:

You can run Open Beta release on the Stable version? Whenever I tried it you can't even see the OB modules if you're on Stable. 

I dont really get what the artist is trying to express but there are two versions of DCS to download: Stable and OpenBeta! OpenBeta gets new stuff first but has to deal more with unfinished work. Stable is designed to be as bugfree as possible and reasonable but "lags behind" with content. You can even have both installed at the same time.

When you try to access stuff from the OB you´ll end up quite disapointed...

  • Like 1
pii

pii

Posted
Posted
22 hours ago, TheGhostOfDefi said:

There shure is: https://www.digitalcombatsimulator.com/en/downloads/world/

No Ah-64 stable at that link probably because there isn't one.

 

22 hours ago, TheGhostOfDefi said:

There shure is: https://www.digitalcombatsimulator.com/en/downloads/world/

I dont really get what the artist is trying to express but there are two versions of DCS to download: Stable and OpenBeta! OpenBeta gets new stuff first but has to deal more with unfinished work. Stable is designed to be as bugfree as possible and reasonable but "lags behind" with content. You can even have both installed at the same time.

When you try to access stuff from the OB you´ll end up quite disapointed...

Arn't we talking about open beta MODULES, not DCS itself? If you use DCS stable you will not even be able to access an open-beta module.

corbu1

corbu1

Posted
Posted

Seems there is some confusion brought into this thread with the latest comments.

  • Like 2

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

  • 2 weeks later...
Marshallman

Marshallman

Posted
Posted

Can the pilot change from K to L missiles. I cant seem to find anything on that??

I can load both types onto the racks but cant find how to do it from Pilot seat.

Makes sense when there are close targets, to use K

Regards

 

3XS AMD RyzenTM 7 9800X3D, AM5, Zen 5, 8 Core, 16 Thread, 4.7GHz, 5.2GHz Turbo, ASUS PRIME X870-P WiFi AM5 DDR5 PCIe 5.0 ATX Motherboard,Nvidia Geoforce RTX4090,Corsair Vengeance Grey 64GB 6000MHz AMD EXPO DDR5 Memory Kit,Windows 10 Pro Reverb G2V2

Grennymaster

Grennymaster

Posted
Posted

the switchin is part of the cp/g workload.

If you fly the bird you can give George the command to swich via controlswitch left long.

But if im not mistaken, you can switch in the Weapon page from both seats, but im not completly sure.

  • Like 1
Marshallman

Marshallman

Posted
Posted

Ill have a deeper look thanks

 

3XS AMD RyzenTM 7 9800X3D, AM5, Zen 5, 8 Core, 16 Thread, 4.7GHz, 5.2GHz Turbo, ASUS PRIME X870-P WiFi AM5 DDR5 PCIe 5.0 ATX Motherboard,Nvidia Geoforce RTX4090,Corsair Vengeance Grey 64GB 6000MHz AMD EXPO DDR5 Memory Kit,Windows 10 Pro Reverb G2V2

corbu1

corbu1

Posted
Posted

Actually until FCR or data link is functional pilot can only choose kilo hellfires. So plt can not choose lima’s from weapon page for now. Later he should be able as well.

The actual lima hellfire implementation requires data for the hellfire from TADS which can only be operated by the cpg. So actually only cpg can choose them from weapon page.

You can also order George AI as gunner tu use lima‘s

  • Like 5
  • Thanks 1

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

Marshallman

Marshallman

Posted
Posted

Thankyou!!

Explains it all nicely!!

 

3XS AMD RyzenTM 7 9800X3D, AM5, Zen 5, 8 Core, 16 Thread, 4.7GHz, 5.2GHz Turbo, ASUS PRIME X870-P WiFi AM5 DDR5 PCIe 5.0 ATX Motherboard,Nvidia Geoforce RTX4090,Corsair Vengeance Grey 64GB 6000MHz AMD EXPO DDR5 Memory Kit,Windows 10 Pro Reverb G2V2

 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...