Amarok_73 Posted January 17, 2024 Posted January 17, 2024 ...and I can't get the propper symbology on IHADSS, instead I have the TADS crosshair and FOV corners in it. Is it bugged or there's some trick I don't know to get the normal symbology back? Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
Amarok_73 Posted January 18, 2024 Author Posted January 18, 2024 6 hours ago, NeedzWD40 said: Grayscale selected where? On the WPN page? Yes, there... Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
NeedzWD40 Posted January 18, 2024 Posted January 18, 2024 You should be able to select Grayscale again and it should return to the normal flight symbology, if it's in the pilot seat.
Amarok_73 Posted January 18, 2024 Author Posted January 18, 2024 I am pretty sure that if I'll use this option again, the callibration symbology appears, then pressing it to disable it the described above TADS symbology reappears. I am not at home now, so if I'll return I'll recheck it though. Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
Amarok_73 Posted January 18, 2024 Author Posted January 18, 2024 @NeedzWD40 Ok, I've tested it and it seems, that this happens only with live CP/G on board. Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
NeedzWD40 Posted January 18, 2024 Posted January 18, 2024 4 minutes ago, Amarok_73 said: @NeedzWD40 Ok, I've tested it and it seems, that this happens only with live CP/G on board. Make sure to document and get a track so it can be reported, that's definitely a bug.
Amarok_73 Posted January 18, 2024 Author Posted January 18, 2024 7 minutes ago, NeedzWD40 said: Make sure to document and get a track so it can be reported, that's definitely a bug. Yeah, but it will take a moment, as my CP/G already gone to sleep, and the track from our recent session where I checked it is 156 MB large. Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
Amarok_73 Posted January 20, 2024 Author Posted January 20, 2024 Sorry for delay, here's the track file. First I am showing how it works without live CP/G, then, after he connect, and activate TADS, I am using the Greyscale again, this time receiving permanently the TADS symbology on IHADSS. IHADSS Grayscale issue.trk 1 Natural Born Kamikaze ------------------------- AMD Ryzen 5 3600, AMD Fatal1ty B450 Gaming K4, AMD Radeon RX 5700 XT, 32 GB RAM Corsair Vengeance LPX, PSU Modecom Volcano 750W, Virpil Constellation Alpha Prime on Moza AB9 base, Virpil MongoosT-50CM3 Throttle, Turtle Beach VelocityOne Rudder.
Nytehawk Posted March 22, 2024 Posted March 22, 2024 Just had this happen while flying with a friend. A few days ago his accidental click on grayscale stuck his IHADSS in grayscale mode, and unboxing the option wouldn't return it. Tonight, I did the same thing, and when grayscale was unboxed it was stuck in grayscale mode, but then boxing it gave me stuck IHADSS symbology. Had to grab a new bird to fix it both times. I wasn't running with track on to record it, but will try to line up some recording time soon.
AirSenpai Posted March 25, 2024 Posted March 25, 2024 On 3/22/2024 at 1:44 AM, Nytehawk said: Just had this happen while flying with a friend. A few days ago his accidental click on grayscale stuck his IHADSS in grayscale mode, and unboxing the option wouldn't return it. Tonight, I did the same thing, and when grayscale was unboxed it was stuck in grayscale mode, but then boxing it gave me stuck IHADSS symbology. Had to grab a new bird to fix it both times. I wasn't running with track on to record it, but will try to line up some recording time soon. land, master arm off and ground arm off. try clicking wpn and gray scale again as if you were going to set the ihadss. you can do it on the air too. but its best to do on the ground. (safety reasons)
Recommended Posts