Server latency timeout

[RokaOvO]

My friend opened a server, but when I tried to connect to it, the loading progress would get stuck in "Mission Load Done" for a few minutes and then pop up "Server Latency Timeout" and get kicked.

This error is not an unresponsive at the time of "Mission Load Done", but is displayed as a response state, and the normal progress should be "Net Sim Post Start" I called a friend to connect to the server and the same error occurred

The server can be seen directly in the server list and can also be connected via IP.

I tried connecting to a different server and it worked.

 

dcs-server-20240411-083357.log dcs-client.log

[Maverick87Shaka]

It looks like nothing happens for about 3 minutes, and that's why the timeout kicked in, from the log I see that server is running several mods and scripts, and they maybe the cause of the issues.
Ask your friend to run a clean server without any mods (olympus in particular), with a simple mission ( use a .miz file that doesn't exceed 1MB for a test) and see if it works or not in that way, and attach new log if the problem persists without mods.



 

[RokaOvO]

12 minutes ago, Maverick87Shaka said:

It looks like nothing happens for about 3 minutes, and that's why the timeout kicked in, from the log I see that server is running several mods and scripts, and they maybe the cause of the issues.
Ask your friend to run a clean server without any mods (olympus in particular), with a simple mission ( use a .miz file that doesn't exceed 1MB for a test) and see if it works or not in that way, and attach new log if the problem persists without mods.



 

Tried uninstalling Olympus as well as very simple tasks, but the truth is still like that.

13 minutes ago, Maverick87Shaka said:

看起来大约 3 分钟没有任何反应，这就是超时开始的原因，从日志中我看到服务器正在运行多个模组和脚本，它们可能是问题的原因。
请你的朋友运行一个没有任何模组（特别是奥林巴斯）的干净服务器，有一个简单的任务（使用不超过 1MB 的 .miz 文件进行测试），看看它是否以这种方式工作，如果问题仍然存在，请附上新日志没有模组。



 

Retesting, the above is what I tested on my friend's server earlier

[RokaOvO]

30 minutes ago, Maverick87Shaka said:

看起来大约 3 分钟没有任何反应，这就是超时开始的原因，从日志中我看到服务器正在运行多个模组和脚本，它们可能是问题的原因。
请你的朋友运行一个没有任何模组（特别是奥林巴斯）的干净服务器，有一个简单的任务（使用不超过 1MB 的 .miz 文件进行测试），看看它是否以这种方式工作，如果问题仍然存在，请附上新日志没有模组。



 

Here

dcs-server.log dcs-client.log

[Maverick87Shaka]

It looks like your client is not able to ping anymore the server  this time....
From server log it looks like the port was opened by UPNP. Please make sure to manually create a firewall rule for bot TCP and UDP port used by DCS server, and also manually add TCP and UDP port forwarding on router to forward incoming traffic to the local IP address of machine that is acting as a server.


 

[RokaOvO]

1 hour ago, Maverick87Shaka said:

看起来您的客户端这次无法再ping服务器了。
从服务器日志来看，该端口似乎是由 UPNP 打开的。请确保手动为DCS服务器使用的机器人TCP和UDP端口创建防火墙规则，并在路由器上手动添加TCP和UDP端口转发，以将传入流量转发到充当服务器的机器的本地IP地址。


 

I contacted the server host and he said that UPNP on the router was always off.

[RokaOvO]

1 hour ago, Maverick87Shaka said:

看起来您的客户端这次无法再ping服务器了。
从服务器日志来看，该端口似乎是由 UPNP 打开的。请确保手动为DCS服务器使用的机器人TCP和UDP端口创建防火墙规则，并在路由器上手动添加TCP和UDP端口转发，以将传入流量转发到充当服务器的机器的本地IP地址。


 

I remotely controlled my friend's server and solved the problem by messing around with the GUI of the router XD