mjayuk Posted July 11, 2024 Posted July 11, 2024 I've just updated to the latest version of DCS. When I try to fly, my Tobii Eye Tracker 5 (which had been working perfectly) isn't tracking anymore. I've tested the Tracker with other software and everything seems OK. Has anyone else experienced this? If so - any idea what I need to do to get it working? I'm just about to reinstall the Tobii software just in case that fixes the issue. I'll post an update here later. Thanks in advance... M 1
gorzasty Posted July 11, 2024 Posted July 11, 2024 After last update my rudder doesnt work. It works in the options but not during flight. I have also red sign at the rudder line, but no info while I hold mouse over it. Wysłane z mojego VOG-L29 przy użyciu Tapatalka 1 PC: i7 13700k, 64GB RAM 3600MHz DDR4, SSD M.2 Drives, RTX 4090, VR: Quest 3. VPC MongoosT-50CM2 Grip, VPC MongoosT-50CM3 Throttle, crosswinds rudder pedals, VPC panel CP3, WinWing PTO2
mjayuk Posted July 11, 2024 Author Posted July 11, 2024 Reinstalling software didn't work. I've also just noticed a couple of other people with the same issue - see thread No headtracking with Tobii Eyetracker with latest update 1
Moxica Posted July 11, 2024 Posted July 11, 2024 (edited) 18 minutes ago, gorzasty said: After last update my rudder doesnt work. It works in the options but not during flight. I have also red sign at the rudder line, but no info while I hold mouse over it. Wysłane z mojego VOG-L29 przy użyciu Tapatalka Had the same with my Thrustmaster throttle; could not be used due to the red exclamation mark on all modules. Here's what I did: Restarted computer. Disconnect, and reconnect throttle. Restarted PC again, started DCS which crashed twice with some DX11 render error. Restart PC, and DCS twice. Suddenly throittle working again. -So do not re-assign or anything (yet) Edited July 11, 2024 by Moxica ASUS ROG Strix B550-E GAMING - PNY GeForce RTX 4090 Gaming VERTO EPIC-X - AMD Ryzen 9 5900X - 64Gb RAM - 2x2Tb M2 - Win11 - Pimax crystal light - HP Reverb g2 - Oculus Quest 2 - Thrustmaster Warthog HOTAS - Thrustmaster Pendular Rudder - 2X Thrustmaster MFD Cougar - Audient EVO8
gorzasty Posted July 11, 2024 Posted July 11, 2024 Had the same with my Thrustmaster throttle; could not be used due to the red exclamation mark on all modules. Here's what I did: Restarted computer. Disconnect, and reconnect throttle. Restarted PC again, started DCS which crashed twice with some DX11 render error. Restart PC, and DCS twice. Suddenly throittle working again. -So do not re-assign or anything (yet)Ok, I will wait and try to re pług it. Thx! Wysłane z mojego VOG-L29 przy użyciu Tapatalka 1 PC: i7 13700k, 64GB RAM 3600MHz DDR4, SSD M.2 Drives, RTX 4090, VR: Quest 3. VPC MongoosT-50CM2 Grip, VPC MongoosT-50CM3 Throttle, crosswinds rudder pedals, VPC panel CP3, WinWing PTO2
mjayuk Posted July 11, 2024 Author Posted July 11, 2024 Update - problem with Tobii fixed by disabling the new launcher 4
Ramses823 Posted July 12, 2024 Posted July 12, 2024 I'm using Tobii as well and after the update my eye tracker stopped working as well. After reading your post I tried disabling the new launcher and it fixed the problem for me as well, hopefully this will get fixed in the next update, heck without reading your post DCS would be unplayable at the moment...
Moxica Posted July 12, 2024 Posted July 12, 2024 2 hours ago, Ramses823 said: I'm using Tobii as well and after the update my eye tracker stopped working as well. After reading your post I tried disabling the new launcher and it fixed the problem for me as well, hopefully this will get fixed in the next update, heck without reading your post DCS would be unplayable at the moment... Well, my throttle assignment problem is back. How do I disable the new launcher? ASUS ROG Strix B550-E GAMING - PNY GeForce RTX 4090 Gaming VERTO EPIC-X - AMD Ryzen 9 5900X - 64Gb RAM - 2x2Tb M2 - Win11 - Pimax crystal light - HP Reverb g2 - Oculus Quest 2 - Thrustmaster Warthog HOTAS - Thrustmaster Pendular Rudder - 2X Thrustmaster MFD Cougar - Audient EVO8
Ramses823 Posted July 12, 2024 Posted July 12, 2024 21 minutes ago, Moxica said: Well, my throttle assignment problem is back. How do I disable the new launcher? On the launcher windows click on the settings icon then to the far right you will see a option to disable it. 1
Moxica Posted July 12, 2024 Posted July 12, 2024 (edited) 1 hour ago, Ramses823 said: On the launcher windows click on the settings icon then to the far right you will see a option to disable it. Thx! I think I might have solved it by using the control-settings main menu. Assign and save from there. It had no exclamation mark. Edited July 12, 2024 by Moxica ASUS ROG Strix B550-E GAMING - PNY GeForce RTX 4090 Gaming VERTO EPIC-X - AMD Ryzen 9 5900X - 64Gb RAM - 2x2Tb M2 - Win11 - Pimax crystal light - HP Reverb g2 - Oculus Quest 2 - Thrustmaster Warthog HOTAS - Thrustmaster Pendular Rudder - 2X Thrustmaster MFD Cougar - Audient EVO8
flying-coyotus Posted July 12, 2024 Posted July 12, 2024 Hi, Tobii updated, I have disabled new launcher, no exclamantion mark in the command, but still doesn't work. Any idea or other clue ? Thanks
Raptorattacker Posted July 12, 2024 Posted July 12, 2024 (edited) 24 minutes ago, flying-coyotus said: Hi, Tobii updated, I have disabled new launcher, no exclamantion mark in the command, but still doesn't work. Any idea or other clue ? Thanks The way I fixed it was to disable the Launcher by going in-game options>Misc and stopping it there (I think it's a button on the right-hand side). Then make sure your GameHub is referring your MT.exe (or normal .exe) by clicking the Magnifying Glass next to DCS World in your GameHub interface (see picture). It should work after that, mine did... Edited July 12, 2024 by Raptorattacker 2
5vn5n Posted July 12, 2024 Posted July 12, 2024 Sometimes restarting both Tobii Programs after spawning in DCS solves the Problem. Since the Update i need to do this every time - i will give disabling the Launcher a try!
GT4NE1 Posted July 13, 2024 Posted July 13, 2024 (edited) Make sure Headtracker.dll is in the bin and bin-mt directories. My first few attempts at updating to 2.9.6.57650 failed and it deleted a bunch of files. I had to do a cleanup and repair but Tobii still wasn't working even after removing and reinstalling all of the Tobii software. I had to manually copy the Headtracker.dll file into bin and bin-mt to get it working again. Something I'm assuming the Tobii software did itself when I first started using it months ago. Check out this page for more information. https://help.tobii.com/hc/en-us/articles/18493132485137-Experiencing-Issues-in-DCS-World Edited July 13, 2024 by GT4NE1 1
Mork Posted July 13, 2024 Posted July 13, 2024 (edited) Hi, We got a new Game launcher, there is a Run Launcher On Start option Inside the new game launcher, go to setting, the option is in the right column. Disable the Run Launcher on Start function. Ok... the New Launcher is now Disabled.... but ... ok until they fix it........ The most important thing is, the Tobii Eye Tracker is working again. If you want it back, after logging in go to options and misc., but who wants that???? Edited July 13, 2024 by Mork
DarkOmenX Posted July 14, 2024 Posted July 14, 2024 Same here however for me if I disable the new Launcher and start the game Tobii 5C is working again Turn'n'Burn..Baby! :joystick:
Snail-6 Posted July 18, 2024 Posted July 18, 2024 (edited) Big thanks guys. Your's solutions work for me. Eagles don't can do anything thith third party software, it is just some issues with major changes in game launcher. Edited July 18, 2024 by Snail-6
Psychotoddler Posted July 19, 2024 Posted July 19, 2024 I can get Tobii working by going back to the game hub after DCS is running and hitting the recycle button to restart tracking. 1
flying-coyotus Posted July 24, 2024 Posted July 24, 2024 On 7/12/2024 at 7:08 PM, Raptorattacker said: The way I fixed it was to disable the Launcher by going in-game options>Misc and stopping it there (I think it's a button on the right-hand side). Then make sure your GameHub is referring your MT.exe (or normal .exe) by clicking the Magnifying Glass next to DCS World in your GameHub interface (see picture). It should work after that, mine did... Finally it works by pointing again the dcs.exe path in Tobii gamehub. Thanks
simo-dj Posted October 1, 2024 Posted October 1, 2024 Updated yesterday with the latest patch and Tobii stopped tracking. And this seems to happen each time there is a major update (july and yesterday). Has anybody found a definitive solution or we still have to disconnect/stop/restart/unplug/plug/pray God? "If you low&slow you're BBQing, if you hot&fast you're grilling, if you low&fast you're flying an Apache"
gazda090 Posted October 5, 2024 Posted October 5, 2024 (edited) On 10/1/2024 at 12:25 PM, simo-dj said: Updated yesterday with the latest patch and Tobii stopped tracking. And this seems to happen each time there is a major update (july and yesterday). Has anybody found a definitive solution or we still have to disconnect/stop/restart/unplug/plug/pray God? try this, it worked for me Tracking features not working https://help.tobii.com/hc/en-us/articles/18493132485137-Experiencing-Issues-in-DCS-World Edited October 5, 2024 by gazda090 1
simo-dj Posted October 6, 2024 Posted October 6, 2024 Thanks @gazda090. I've sorted it out by looking at the same article. Thanks for your help "If you low&slow you're BBQing, if you hot&fast you're grilling, if you low&fast you're flying an Apache"
Recommended Posts