Reshade VR Enhancer Mod (VREM)

[gonvise]

3 hours ago, lefuneste01 said:

Can you reproduce with another plane and put track here ? I do not have the F16C, but I have the F18, the AV8, the P51.FC planes and of course the Su25T. When you have saturated color outside, is the cockpit in HDR anyway ?

Any aircraft, the thing is that after loading a mission in Afghanistan, the colors appear saturated or darker, I couldn't say, and if you then load one in Caucasus the same thing happens again. The HDR continues to work in all cases only in the cockpit. I'm going to try to delete the shader directories.

[lefuneste01]

48 minutes ago, gonvise said:

Any aircraft, the thing is that after loading a mission in Afghanistan, the colors appear saturated or darker, I couldn't say, and if you then load one in Caucasus the same thing happens again. The HDR continues to work in all cases only in the cockpit. I'm going to try to delete the shader directories.

But not if you are flying directly in Caucasus and not start with Afghanistan ?

[gonvise]

23 minutes ago, lefuneste01 said:

But not if you are flying directly in Caucasus and not start with Afghanistan ?

First of all, sorry for the quality of the screenshots, I'm remote... the effect is the same in 2D and VR

Loading several missions in Caucasus, one after the other, all good...

Loading first Afghanistan mission...saturated colors

Loading again same caucasus mission, saturated colours...

And after load first mission, this shadow appears in the menu, it is the cockpit frame of the plane...

[lefuneste01]

3 hours ago, gonvise said:

First of all, sorry for the quality of the screenshots, I'm remote... the effect is the same in 2D and VR

And after load first mission, this shadow appears in the menu, it is the cockpit frame of the plane...

you should always have the shadow, as the effect and its mask is applyed on the whole picture.  I have it for example at the beginnign of quick mission for AH64 when the briefing box is displayed. I do not have afghanistan, I can not reproduce. Can you try with Sirya, PG, Normandy ?

Can you aslo try the button "refresh technique" when you have the issue in caucasus after afghanistan ?

And can you do a "capture frame" and put the reshade.log when in afghanistan and having the saturated color issue ?

[gonvise]

3 hours ago, lefuneste01 said:

you should always have the shadow, as the effect and its mask is applyed on the whole picture.  I have it for example at the beginnign of quick mission for AH64 when the briefing box is displayed. I do not have afghanistan, I can not reproduce. Can you try with Sirya, PG, Normandy ?

Can you aslo try the button "refresh technique" when you have the issue in caucasus after afghanistan ?

And can you do a "capture frame" and put the reshade.log when in afghanistan and having the saturated color issue ?

Of course, the shadow doesn't matter.

The same thing happens in Syria. 

With "refresh technique" nothing change.

Attach reshade.log with free fight in syria with saturated colours after "capture frame".

 

ReShade.log

[lefuneste01]

11 hours ago, gonvise said:

Of course, the shadow doesn't matter.

By "shadow" I mean the footprint of the cockpit in the menu (you named it like that previously). So it is normal as the effect apply on the whole picture, whatever there is a menu or not. Setting mask for menu would be a lot of work.
I tried the F18 quick mission in Syria with cockpit only for HDR, there is not change on external color when enabling/disabling HDR, only cockpit is changing...So I can not reproduce. You did not capture the frame (maybe you did not set the debug feature...).

Anyway, there is something strange : effects seems compiled 2 times in your config...

Just to be sure, could you uninstall VREM and reshade, delete all *.ini files (it will reset your VREM settings, maybe you could backup DCS_VREM.ini), re install reshade and VREM and unzip this zip containinig my DCS_VREM.ini file into bin-mt, then launch the game ?

 

DCS_VREM.zip

Edited February 7 by lefuneste01

[slowmover]

Hello mates. I am want to add only 3 features 1-label masking feature 2-NVG feature and 3-430 feature.Is there any way to add only this 3 features?
I am asking because i have installed reshade with Direct-X11/12  and Open XR enable at installation and i am not sure if the whole VREM MOD pack will work.
If i unpck only the shaderreplace folder with what i want will it work?

Edited February 7 by slowmover

[lefuneste01]

26 minutes ago, slowmover said:

Hello mates. I am want to add only 3 features 1-label masking feature 2-NVG feature and 3-430 feature.Is there any way to add only this 3 features?
I am asking because i have installed reshade with Direct-X11/12  and Open XR enable at installation and i am not sure if the whole VREM MOD pack will work.
If i unpck only the shaderreplace folder with what i want will it work?

See explanation on the first post:  you should not install OpenXR support for Reshade, only DirectX11. You MUST install all the components of the mod : the addon, the shaderreplace,..If you remove any .cso file, it will make DCS crashing. I keep it in this way to have people informed of any missing components.

Have a look also the videos showing how to setup the different options. 

The mod is smart enough to load only what is selected in the mod settings. For example if you did not select any option needing the stencil mask (not your case as you want label feature), the texture will not be copied. Same for NS430 texture (not your case also). Only needed shaders (.cso file) will be used.
Just tick the things you want, maintain the other unticked. That's it.

[slowmover]

Thanks mate i will give a try. I guess i have to reinstall Reshade with out the OpenXr and just use the Mod with OvGME. Question the NS430addon work onoly with Heuy or with all modules? (i guess with all)

[gonvise]

9 hours ago, lefuneste01 said:

By "shadow" I mean the footprint of the cockpit in the menu (you named it like that previously). So it is normal as the effect apply on the whole picture, whatever there is a menu or not. Setting mask for menu would be a lot of work.
I tried the F18 quick mission in Syria with cockpit only for HDR, there is not change on external color when enabling/disabling HDR, only cockpit is changing...So I can not reproduce. You did not capture the frame (maybe you did not set the debug feature...).

Anyway, there is something strange : effects seems compiled 2 times in your config...

Just to be sure, could you uninstall VREM and reshade, delete all *.ini files (it will reset your VREM settings, maybe you could backup DCS_VREM.ini), re install reshade and VREM and unzip this zip containinig my DCS_VREM.ini file into bin-mt, then launch the game ?

 

DCS_VREM.zip 1.03 kB · 3 downloads

I was doing a step by step to give you all the information but, in short, it turns out that with your DCS_VREM it now works perfectly... and I say this because yesterday I tried to do what you say, that is, start from zero, and the only thing that has changed is your file. I'll send you my old DCS_VREM file in case you notice something that could cause the color saturation or what you mention about the double compilation.

DCS_VREM.ini

[slowmover]

1 hour ago, lefuneste01 said:

See explanation on the first post:  you should not install OpenXR support for Reshade, only DirectX11. You MUST install all the components of the mod : the addon, the shaderreplace,..If you remove any .cso file, it will make DCS crashing. I keep it in this way to have people informed of any missing components.

Have a look also the videos showing how to setup the different options. 

The mod is smart enough to load only what is selected in the mod settings. For example if you did not select any option needing the stencil mask (not your case as you want label feature), the texture will not be copied. Same for NS430 texture (not your case also). Only needed shaders (.cso file) will be used.
Just tick the things you want, maintain the other unticked. That's it.

I reinstalled it with only DirectX selected and  i could not manage to make it work.But i installed it only at bin/mt i use only the MT verzion.At Home page at reshade should i leave them all blank or can i use that effects?  May the force enable VR is a problem here?

Or maybe i should uncheck from openXRtoolkit?

 

Here also my settings:       Should i turn off anti-allasing and Upscalling?


 

Edited February 7 by slowmover

[lefuneste01]

1 hour ago, slowmover said:

I reinstalled it with only DirectX selected and  i could not manage to make it work.But i installed it only at bin/mt i use only the MT verzion.At Home page at reshade should i leave them all blank or can i use that effects?  May the force enable VR is a problem here?

Or maybe i should uncheck from openXRtoolkit?

Ensure to install the reshade version with addon support, and there is a screencopy in first post of supported settings. cockpit illumination should be off. I do not know for OpenXR toolkit, as it is not compliant with quad view I disabled it for the Varjo. Try at first without it, and once it will work test to enable it again. What is the "force enable VR" ?

[slowmover]

-installed Reshade 6.3.3 with full ad on support and ONLY directX both at bit and bit-mt
-installed  ReshadeDCS_VREM_v7.2_unofficial_reshade  with ovgme

I tested it on 2D. Hiding label works. NVG does not work on 2D. And at VR nothing works

And also my settings
 

 

Edited February 8 by slowmover

[lefuneste01]

7 hours ago, slowmover said:

-installed Reshade 6.3.3 with full ad on support and ONLY directX both at bit and bit-mt
-installed  ReshadeDCS_VREM_v7.2_unofficial_reshade  with ovgme

I tested it on 2D. Hiding label works. NVG does not work on 2D. And at VR nothing works

And also my settings
 

 

Can you try disabling volumetric light or use the settings I put here https://forum.dcs.world/topic/356128-reshade-vr-enhancer-mod-vrem/page/6/#findComment-5595871

 

[slowmover]

4 minutes ago, lefuneste01 said:

Can you try disabling volumetric light or use the settings I put here https://forum.dcs.world/topic/356128-reshade-vr-enhancer-mod-vrem/page/6/#findComment-5595871

 

I think I tried your option.lua settings but it did not helped. I will try again and I will also disable volumetric light. If still does not work what else can I try? 

[lefuneste01]

Just now, slowmover said:

I think I tried your option.lua settings but it did not helped. I will try again and I will also disable volumetric light. If still does not work what else can I try? 

Put your option.lua here.

[gonvise]

Using VREM HDR all day in differents missions; the effect works, it's awesome, but every four or five DCS starts, this happens an HDR VREM doen's work:

 

[lefuneste01]

5 hours ago, gonvise said:

Using VREM HDR all day in differents missions; the effect works, it's awesome, but every four or five DCS starts, this happens an HDR VREM doen's work:

 

That’s very hard for me to solve if I can not reproduce..could you provide  reshade.log in this case ?

[gonvise]

18 hours ago, lefuneste01 said:

That’s very hard for me to solve if I can not reproduce..could you provide  reshade.log in this case ?

For example, this time it was by enabling the Technicolor2_for_VREM effect and modifying its strength, in this case it even crashed DCS...

ReShade.log

[lefuneste01]

12 hours ago, gonvise said:

For example, this time it was by enabling the Technicolor2_for_VREM effect and modifying its strength, in this case it even crashed DCS...

It seems yo uhave no more the double entires for each shaders. Once you will have choosen your settings, could you try to tick the option "technique only for VRview" in VREM "technique" settings ?

[gonvise]

7 hours ago, lefuneste01 said:

It seems yo uhave no more the double entires for each shaders. Once you will have choosen your settings, could you try to tick the option "technique only for VRview" in VREM "technique" settings ?

Where exactly do you see this duplication in reshade.ini? I just wanted to check it myself.

[gonvise]

First test checking the option "technique only for VRview" in VREM, and in this moment...

ReShade.log

[lefuneste01]

3 hours ago, gonvise said:

Where exactly do you see this duplication in reshade.ini? I just wanted to check it myself.

I just saw then in reshade.log...

[lefuneste01]

4 hours ago, gonvise said:

First test checking the option "technique only for VRview" in VREM, and in this moment...

I think I understand the issue: rshade is re compiling the shaders on the furst 3D game session. I'll have a look...

[lefuneste01]

15 hours ago, gonvise said:

First test checking the option "technique only for VRview" in VREM, and in this moment..

Could you try to replace reshade DCS VREM.addon64 in the bin-mt folder by the one in the provided zip ?

Technique are recompiled at 3D session lauch, this is why your game may hang. No way to avoid this.

I setup a sleep option that used a new variable in "debug" section. By default it is 100ms, but you can increase it. It may help (or not) reshade to not block...

reshade DCS VREM.zip