i-scott Posted January 29 Posted January 29 (edited) I have Virpil pedals which are normally working fine, but, (there is always a but) for some reason has lost the bindings, what I mean by this is a day or so ago I was on flying a10IIc and had to use pedals on the ground to steer etc and to control yaw in flight. Yesterday I want on to practise the F4 and started to taxi, but was unable to steer. On checking control settings I found that the bindings weren't there any more. Trouble is you can see the VPC device in the controls but when you pick to pind to brakes or rudder etc. when you go to select the binding options for Z-Axis, Slider and Dial are missing. If I use windows Game Controllers to inspect game controllers I can see the VPC Rudder Pedals and when I check the properties I can see Z-Axis, Slider and Dial fine and they work, react to me using them on the hardware. So far I have, disabled hot plug and re-enabled Recanned all devices Unplugged the rudders and Plugged back in Done a purge of all USB Devices removing all that are not used and to keep all usb Device down to a minimum (about 7 devices) Downloaded VIrpils Software updater and applied latest firmware. Also Virpils software shows the device properly Removed the User Config folder and allowed it to be rebuilt Removed and reinstalled main DCS Game Right now I am stumped and not sure what step to try next, can anyone help Here is the screen in DCS settings null Edited January 29 by i-scott move image
evanswillo Posted January 29 Posted January 29 (edited) When you move the pedal feet forward, the Slider box should move for left pedal and Dial for the right pedal. Are you sure you have completed the Virpil Configuration steps under Axis for these three items Zaxis Slider Axis and Dial Axis should all be blue In DCS mine are known as joy_slider1 / 2 Edited January 29 by evanswillo upodate AMD 7800X3D, MSI PRO X670-P WIFI (AM5) 64GB RGB DDR5 6000MHz Nvidia 4090 Windows 11 Home Version 24H2 OS build 26100.2605 Nvidia Driver 566.36 HOTAS Virpil CM3 Joystick Throttle & Pedal
i-scott Posted January 29 Author Posted January 29 (edited) Hi yeah, got all blue across the board. Never had to use the software before, worked fine then settings dropped off as though the device was not there any more Have added additional screen shot of what I see in main post Edited January 29 by i-scott
i-scott Posted January 29 Author Posted January 29 @evanswillo this is what i see when i run the VPC Software null
i-scott Posted January 29 Author Posted January 29 Hmmm, not sure what I have done,BUT............... All good. WOnder if it was the recalibrate
Scott-S6 Posted February 28 Posted February 28 On 1/29/2025 at 3:05 PM, i-scott said: I have Virpil pedals which are normally working fine, but, (there is always a but) for some reason has lost the bindings, what I mean by this is a day or so ago I was on flying a10IIc and had to use pedals on the ground to steer etc and to control yaw in flight. Yesterday I want on to practise the F4 and started to taxi, but was unable to steer. On checking control settings I found that the bindings weren't there any more. Trouble is you can see the VPC device in the controls but when you pick to pind to brakes or rudder etc. when you go to select the binding options for Z-Axis, Slider and Dial are missing. If I use windows Game Controllers to inspect game controllers I can see the VPC Rudder Pedals and when I check the properties I can see Z-Axis, Slider and Dial fine and they work, react to me using them on the hardware. So far I have, disabled hot plug and re-enabled Recanned all devices Unplugged the rudders and Plugged back in Done a purge of all USB Devices removing all that are not used and to keep all usb Device down to a minimum (about 7 devices) Downloaded VIrpils Software updater and applied latest firmware. Also Virpils software shows the device properly Removed the User Config folder and allowed it to be rebuilt Removed and reinstalled main DCS Game Right now I am stumped and not sure what step to try next, can anyone help Here is the screen in DCS settings null In your last screen shot you are looking at the binding for a digital input, not analogue. I.e. you're binding a key or button specifically to rudder left rather than binding an analogue axis to the rudder. You need to select the axis bindings section in the controls menu, the default view shows digital only.
Recommended Posts