Tempelhof and Schonefeld main runway switch please

[grim_reaper68]

Hi

As I'm working on the ILS correction on the GDR side, I noticed during a test flight at Berlin's airports, that on Tempelhof, none of the ILS frequencies appears. But they are in the Beacon list. At Schonefeld, only the 25R (110.30). It seems to come from the fact that the main runway is on the 09L/27R for Tempelhof, and 07L/25R for Schonefeld, which, by the way have only an ILS on the 25R (that is correct).

I think DCS is unable to "use" ILS at 2 runways at the same airport, which can be tricked in the beacons.lua, but only the "main" runway is displayed in the information window. So, I suggest to switch the "main" runway to 09R/27L for Tempelhof and 07R/25L for Schonefeld, so players could have both ILS direction displayed in the information window on the map while flying.

Here you can see Tempelhof without any ILS information. And above I put the screen from the Mission Editor Beacon page. It my WIP Beacons.lua so don't be surprised to see informations you don't have on the stock one. 

Beacons

And here Schonefeld information on the ingame map

For comparison here the Hannover info, as you can see, the "main" runway is the southern one, and the ILS IHSE and IHSW are those from that one

Edited May 10 by grim_reaper68

[MAESTR0]

Hi
Write how it will work after the update, because I see that it is assigned as you ask:
in Schönefeld 1#25L and 2#25R
in Tempelhof: 1#09R and 2#09L
I indicated the main courses and numbers for these runways.
1# and 2# are the runway numbers. So in Schönefeld the first runway is 25L/07R with the main course 25L

[grim_reaper68]

[grim_reaper68]

Hi

First of all, thanks for the update! I saw that Tempelhof's runway has switched, Could you do the same for Schonefeld?