unable to reproduce freezes an F-16

[nodes]

Im from Russia. Recently, I started playing the F-16 module, but I encountered a problem: I experience stutters and freezes specifically with this module. I can’t play normally because the game freezes during any maneuver with the aircraft. I posted about this on the Russian forum, but nobody was able to help me. Ryzen 5 5600, rtx 2060 super, HDD 500 gb 

video: https://drive.google.com/file/d/1uEblFW7D7bsnta64ggrY25u4qdt_Fcpc/view?usp=sharing

фризы2.log фризы.trk

Edited Monday at 01:41 PM by nodes

[NineLine]

Hi, we need your dcs.log, please. Thanks!

[nodes]

29 минут назад, NineLine сказал:

Hi, we need your dcs.log, please. Thanks!

 

cef_log.log dcs.20241222-110846.crash dcs.20241222-110846.dmp dcs.log dcs.log-20241229-135332.zip dcs.log-20241229-142942.zip dcs.log-20241229-143255.zip dcs.log-20241229-143448.zip dcs.log.old debrief.log

[rob10]

System RAM: 15315 MB, Pagefile: 11776 MB

You're playing with only bare minimum RAM requirement.  I'd bump your pagefile to a fixed min/max of 32,768GB and make sure it's on a fast drive (not a HDD).

[nodes]

9 часов назад, rob10 сказал:

System RAM: 15315 MB, Pagefile: 11776 MB

You're playing with only bare minimum RAM requirement.  I'd bump your pagefile to a fixed min/max of 32,768GB and make sure it's on a fast drive (not a HDD).

It didn't help, it even seemed to get worse

[BJ55]

Try with repairing/reinstalling VC_redist (you can find it in ..\DCS World\distr) , perform a RAM check. A dxdiag log could be helpful.

https://forum.dcs.world/topic/312131-dcs-error-vcruntime140dll/

 

[nodes]

3 часа назад, BJ55 сказал:

Try with repairing/reinstalling VC_redist (you can find it in ..\DCS World\distr) , perform a RAM check. A dxdiag log could be helpful.

https://forum.dcs.world/topic/312131-dcs-error-vcruntime140dll/

 

Not work

[BJ55]

2025-06-02 14:42:08.673 WARNING SECURITYCONTROL (Main): IC fail: coremods/aircraft/f-16c/entry.lua

+ other multiple IC fail warnings... Perform a full repair, if this doesn't work uninstall the F-16 module, restart and close DCS, reinstall the module, check if DCS installation folder is excluded from AV scanning and disable memory integrity, also disable disk indexing for faster r/w.

Check your free disk space, must be at least 100GB.

Be aware that your sys specs are very low, bring the pagefile to fixed 64GB and start thinking at some HW upgrades (64GB RAM, 2TB SSD).

Edited Tuesday at 02:51 PM by BJ55

[NineLine]

On 6/2/2025 at 8:30 AM, nodes said:

 

cef_log.log 92.61 kB · 4 downloads dcs.20241222-110846.crash 1.35 kB · 4 downloads dcs.20241222-110846.dmp 534.47 kB · 4 downloads dcs.log 252.31 kB · 11 downloads dcs.log-20241229-135332.zip 109.51 kB · 2 downloads dcs.log-20241229-142942.zip 100.48 kB · 2 downloads dcs.log-20241229-143255.zip 116.84 kB · 2 downloads dcs.log-20241229-143448.zip 104.14 kB · 2 downloads dcs.log.old 1.47 kB · 3 downloads debrief.log 56.53 kB · 2 downloads

Your system is most likely the issue here.

Changing the page file when you have little to no room on either of your drives won't help much. Your current drivers are fairly slow drives as well. Consider a larger drive at least, assuming your system is not capable of handling an M.2 drive. Most things will not run well on drives that are near full.

Your system memory is ok, but not helped by poor pagefile performance I am sure.

VRAM is bare minimum, and the 2060 card is not great. But it's usable at low settings, if the other issues did not exist. 
The quickest, easiest move here is a better drive, but even then, your system will need to use lower settings.