Pimax Play v1.41.1

[Nuggetz]

Using Pimax Play 140.4, QVFR, QV Companion @120% I get:

Marianas mostly 90fps, low level over Guam 65-75 fps. (Ultra Shadows- Low might yeild 90) On the ground at Anderson 90 fps. 

Germany mostly 90 fps. Berlin low level 55-65 fps (side view awful).

Sinai mostly 90 fps. 

Conclusion: despite some attractive features the latest Pimax Play it appears to be inferior to version 140.4 with QVFR & QVC in pure performance terms. 
 

Hopefully Pimax have some new PP under development  

 

Edited August 18 by Nuggetz

[Moxica]

The PiServer keep crashing. I havent even started Pimax Play, just by starting my PC, this is in event viewer:

Programnavn med feil: PiServiceLauncher.exe, versjon: 0.0.0.0, tidsangivelse: 0x671f43f7
Modulnavn med feil: ucrtbase.dll, versjon: 10.0.22621.3593, tidsangivelse: 0x10c46e71
Unntakskode: 0xc0000409
Feilforskyvning: 0x000000000007f6fe
Feil prosess-ID: 0x0x70C
Feil starttid for program: 0x0x1DC0F7CDB6C112B
Feil programbane: C:\Program Files\Pimax\Runtime\PiServiceLauncher.exe
Feil modulbane: C:\WINDOWS\System32\ucrtbase.dll
Rapport-ID: 3cfe5fc9-ea39-4bdb-b596-759607f41710
Fullstendig navn på feilpakke: 
Relativ program-ID for feilpakke: 

Edited August 17 by Moxica

[Calvin.Pimax]

On 8/17/2025 at 2:57 AM, Nuggetz said:

Using Pimax Play 140.4, QVFR, QV Companion @120% I get:

Marianas mostly 90fps, low level over Guam 65-75 fps. (Ultra Shadows- Low might yeild 90) On the ground at Anderson 90 fps. 

Germany mostly 90 fps. Berlin low level 55-65 fps (side view awful).

Sinai mostly 90 fps. 

Conclusion: despite some attractive features the latest Pimax Play it appears to be inferior to version 140.4 with QVFR & QVC in pure performance terms. 
 

Hopefully Pimax have some new PP under development  

 

For sure! The devs will be reviewing the QV parameters and working on revisions to improve performance based on user feedback.

On 8/18/2025 at 12:19 AM, Moxica said:

The PiServer keep crashing. I havent even started Pimax Play, just by starting my PC, this is in event viewer:

Programnavn med feil: PiServiceLauncher.exe, versjon: 0.0.0.0, tidsangivelse: 0x671f43f7
Modulnavn med feil: ucrtbase.dll, versjon: 10.0.22621.3593, tidsangivelse: 0x10c46e71
Unntakskode: 0xc0000409
Feilforskyvning: 0x000000000007f6fe
Feil prosess-ID: 0x0x70C
Feil starttid for program: 0x0x1DC0F7CDB6C112B
Feil programbane: C:\Program Files\Pimax\Runtime\PiServiceLauncher.exe
Feil modulbane: C:\WINDOWS\System32\ucrtbase.dll
Rapport-ID: 3cfe5fc9-ea39-4bdb-b596-759607f41710
Fullstendig navn på feilpakke: 
Relativ program-ID for feilpakke: 

Please file a support ticket, our engineers will reach out to you shortly.

[Papamiraculi]

Hi, I have updated to the latest hotfix. How do I now use the original Mbucchia QV? Do I need to uncheck Quadviews in Pimax Play for DCS but enable it in DCS to use the original?

I have tried that but it didn't work, but I haven't de- and reinstalled Mbucchia QV yet (I have just read I am supposed to do that).

Does enabling quad views in Pimax Play generally override Mbucchia QV? 

 

I get jittering in DCS. Generally the whole experience is far from smooth. DCS frame counter gives me constant 90fps and constant frametimes, but I get jittering all the time which makes it very much unplayable, it at least not enjoyable.

[Rufuz64]

On 8/20/2025 at 3:15 PM, Papamiraculi said:

Hi, I have updated to the latest hotfix. How do I now use the original Mbucchia QV? Do I need to uncheck Quadviews in Pimax Play for DCS but enable it in DCS to use the original?

I have tried that but it didn't work, but I haven't de- and reinstalled Mbucchia QV yet (I have just read I am supposed to do that).

Does enabling quad views in Pimax Play generally override Mbucchia QV? 

Reinstall mbucchia QV and uncheck QV in PP.

And yes, QV in PP overrides mbucchisa's QV.

[Papamiraculi]

vor 18 Stunden schrieb Rufuz64:

Reinstall mbucchia QV and uncheck QV in PP.

And yes, QV in PP overrides mbucchisa's QV.

Ok, thanks, this worked. 

I find the original much better than the PP QV. mbucchia QV allows for turbo mode and to reduce the border size. I think the PP version doesn't do this.

[Gun Jam]

I have version 1.41.2

Using quadviews If I want to supersample the Foveated section in the center of the FOV to 150% is the following the correct method?

Note: "Gaze area resolution" can not be set past 100. This would be the logical way to supersample the foveated part of the display... but no.

1) Set image quality "CUSTOM" set slider to 150% 

2) Set quadviews "Gaze area resolution to 100%

This means that the whole image is now 150% boosted and I would have to reduce "peripheral area resolution" by 50% to get it back to the same value as it was when "set image quality" was at 100%???

Is this the proper way to SS the foveated section in PP?

Thanks!

[MadMonty]

After summer break, I upgraded to 1.41.2, reinstalled QV Companion (just as a precaution) and got everything to run smooth again at 72Hz without having to change anything.

Tried PP Quadviews (while deactivating QVC), but I had big problems only achieving 35 FPS and a lot of stutter.

 

But one thing bothers me - pressing volume + button on the Super does not open the Pimax Menu anymore, just keeps increasing volume. @Calvin.PimaxDo I have to activate it in the settings or is this mandatory feature gone?

Edited 14 hours ago by MadMonty

[Gun Jam]

11 hours ago, MadMonty said:

but I had big problems only achieving 35 FPS and a lot of stutter.

@Calvin.Pimax Im having almost the exact same issue.

1) I started out with 4.41.2 and nothing else.

2) i used Quadviews in PP only and right away got a good 75ish FPS on the ground and about 85 to 90 in the air. It was working well.

3) I tried some other setting only within PP like using "start" in the games tab within the "DCS" game after making setting adjustments. I also tried "smart smoothing" and lock to half frame rate.

4) after doing the steps describe in 3 FPS dropped to 35 and was not usable. I could not solve this problem by reversing the settings. I gave up and installed  1.40.4 and quadviews. This ran great (at least as good as in step 2) but DCS would crash frequently. 

5) I switched back to 4.41.2 and tried only the PP quadviews. same problem 35 fps. Reinstalled (repair option) mbuccha quadviews and using that I get 75-90 fps again.

6) but dcs still seems to crash a lot. Im worried its a cable issue. am investigating.

[Gun Jam]

@Calvin.Pimax

In order to help trouble shoot the crashing issue I simply enabled quadviews within PP its my understanding that they overwrite the mbuccha quadviews. I was expecting to fly around at 30fps but wanted to see if it would crash.

to my surprise I was getting the same FPS as with mbucca's QV

1) I dont know why its working now

2) I havent figured out how to replicate the issue yet

3) This seems to have stopped the constant crashing will keep testing this

Thanks!