Leo Bodnar's BU0836 Dims?

[jrsteensen]

Hey all. I need the overall dimensions of leo's matrixed board, and where the screwholes and pinheaders are so I can finish up a CAD file that will interface with it before sending it off for manufacturing.

 

Any help?

[Kuky]

you have all the info at his website

http://www.leobodnar.com/products/BU0836/

[jrsteensen]

Unfortunately I do not. I have the overall dimensions, true. However, they do not specify distance between mounting holes, or location of pinheaders by measurement.

 

If anyone could bust out a ruler or calipers, I would be much obliged.

[Duckling]

Hi jrsteensen

 

With best effort:...

 

from a BU0386, PCB labled "Leo Bodnar 2006/06X0282":

 

- Board outer dim is 58,0 x 31,7 mm

- Holes center to center is 50 mm long side / 23 mm shortside centered on PCB

- Holes diameter 3,1 mm

- USB header 12,2 mm wide centered shortside, sticking out 1 mm outside PCB

- PinOut block 38 mm x 8,7 mm (bottom block) with pin 1 distance from shortside 10,4 mm / 4,2 mm from longside (i.e GND row pins slightly "above" centerline between "longside" holes)

 

Hope it could be of some help

/Gus

 

.. pin max height over PCB is 8,4 mm, pinblock height over PCB is 2,4 mm (leaving 6mm free contact height)

USB contact height 11 mm above PCB

Edited March 13, 2010 by Duckling

[jrsteensen]

Perfect! Thank you so much!

[Kuky]

Duckling already did this for you but what you could have done is use the photo and measure yourself then scale according to shown dimensions