Deadman Posted August 13, 2010 Posted August 13, 2010 (edited) HI I am looking for MIG 29 grip and throttle part number for a friend any one happen to have them thanks Edited August 14, 2010 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Machinegun417 Posted August 14, 2010 Posted August 14, 2010 I am looking for one myself for my cockpit. Please let me know if find one.
Deadman Posted August 14, 2010 Author Posted August 14, 2010 well if i get the part number and i find only one it goes to the friend first But if i find two what is your budget? https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
71st_Mastiff Posted August 14, 2010 Posted August 14, 2010 http://www.simaviatik.com/map/ "any failure you meet, is never a defeat; merely a set up for a greater come back", W Forbes. "Success is not final, failure is not fatal, it is the courage to continue that counts", "He who never changes his mind, never changes anything," Winston Churchill. MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||
Scudslaker Posted August 14, 2010 Posted August 14, 2010 ??? TM HOTAS WH :joystick:, Saitek Pro Pedals, Track IR 4, 2xJoyWarrier, 1x KeyWarrior, i52500k @4600MHz, ASUS P8Z68-V Pro, NV 670GT, SSD+ WD BC+ WD Raptor, 32HD:pilotfly:[sIGPIC][/sIGPIC]
71st_Mastiff Posted August 14, 2010 Posted August 14, 2010 just go there and read, they will make cockpits and any thing you want. http://www.simaviatik.com/en/index.php?show=F-16-Cockpit http://www.simaviatik.com/en/index.php?show=me109 http://www.simaviatik.com/en/index.php?show=P-51-Mustang "any failure you meet, is never a defeat; merely a set up for a greater come back", W Forbes. "Success is not final, failure is not fatal, it is the courage to continue that counts", "He who never changes his mind, never changes anything," Winston Churchill. MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||
Deadman Posted August 14, 2010 Author Posted August 14, 2010 (edited) Ok that is nice but not what I am asking for i have several suppliers that deal with Stock number or part numbers so I am ASKING IF ANY ONE KNOWS THE PART NUMBER FOR THE GRIP.This is not ment to be yelling just witen large so all can understand what i am asking for thanks Edited August 14, 2010 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Triggerhappy69 Posted August 14, 2010 Posted August 14, 2010 Ok that is nice but not what I am asking for i have several suppliers that deal with Stock number or part numbers so I am ASKING IF ANY ONE KNOWS THE PART NUMBER FOR THE GRIP. I have the original russian Combat Manual, and the NATO Flight Manual for the MIG-29. If you give me your email address, I'll send them to you so you can go through them and see if you find a referance to the control stick part number somewhere inside one of them?..? "But (504)Brewber said they were'nt friendly.. So I took'em out.!" [sIGPIC][/sIGPIC]
Deadman Posted August 14, 2010 Author Posted August 14, 2010 Thanks amigo email on the way :thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Triggerhappy69 Posted August 14, 2010 Posted August 14, 2010 everyone else.. Just go to my 4Shared site and download the manuals from there: http://www.4shared.com/dir/Joo3U9fB/sharing.html "But (504)Brewber said they were'nt friendly.. So I took'em out.!" [sIGPIC][/sIGPIC]
Scudslaker Posted August 15, 2010 Posted August 15, 2010 nice trigger,..i put my finger on the trigger... great support mate.. TM HOTAS WH :joystick:, Saitek Pro Pedals, Track IR 4, 2xJoyWarrier, 1x KeyWarrior, i52500k @4600MHz, ASUS P8Z68-V Pro, NV 670GT, SSD+ WD BC+ WD Raptor, 32HD:pilotfly:[sIGPIC][/sIGPIC]
JLZ Posted August 15, 2010 Posted August 15, 2010 I had taken TriggerHappy69 Mig-29 manual and made it searchable. It should be much more useful this way if you were looking for specific data... http://www.megaupload.com/?d=JTJ5XF82 1 [sIGPIC][/sIGPIC]
aap_flanker Posted August 16, 2010 Posted August 16, 2010 hi everybody! I'm looking for some help... I'm finishing the design process of su-27 panel (systems), but in the draws that I found I just can't be abble to found the toggle switch that is employed to select between "scan" (OBZ) and "track-while-scan"(SNP) modes. any ideas???? thanks Intel i5 11700F + H80 | 4x4GB 3200mhz RAM | AORUS ELITE B560M | Samsung 850 PRO SSD 256gb| KINGSTON SA400 480GB SSD | WD 500GB | Gigabyte GTX 1070 8GB | Antec 1200 PSU | Thrustmaster Warthog HOTAS and homemade panels and rudder pedals | 24" Samsung T24C550 @60Hz 2ms | Opentrack 3 led clip
Deadman Posted August 17, 2010 Author Posted August 17, 2010 Ah start a tread with YOUR question in the Title line so maybe it gets an answer.:music_whistling: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
aap_flanker Posted August 18, 2010 Posted August 18, 2010 Ah start a tread with YOUR question in the Title line so maybe it gets an answer.:music_whistling: ok! thanks for your recomendation! :thumbup: Intel i5 11700F + H80 | 4x4GB 3200mhz RAM | AORUS ELITE B560M | Samsung 850 PRO SSD 256gb| KINGSTON SA400 480GB SSD | WD 500GB | Gigabyte GTX 1070 8GB | Antec 1200 PSU | Thrustmaster Warthog HOTAS and homemade panels and rudder pedals | 24" Samsung T24C550 @60Hz 2ms | Opentrack 3 led clip
Recommended Posts