JG27_Arklight Posted December 4, 2010 Posted December 4, 2010 (edited) *EDIT* Nvm...strangely enough, it looks like my mouse is the culprit. How...I have no idea. Needless to say, I am glad it wasn't the Warthog. lol *EDIT* Nvm again...I have no idea whats going on. :( Mods please delete. Edited December 5, 2010 by JG27_Arklight Ark ------------------ Windows 10 Pro x64 9900K @ 5ghz Gigabyte Aorus Master Z390 32GB G.Skill Trident Z RGB CAS 14 EVGA RTX 2080 Ti Ultra XC2 256gb Samsung 869 Pro (Boot Drive) 1TB - Samsung 970 EVO Plus Seasoninc 1000w Titanium Ultra PSU 34" ASUS PG348
Slammin Posted December 5, 2010 Posted December 5, 2010 No worries. I usually create threads like these when I have beer in my eye :P Abit IN9 32x MAX- Kentsfield QX6700 @3520 1.5 vcore watercooled D-Tek Fuzion/PA-160/MCR120/2x MCP655 2x2GB G-Skill 1066 5-5-5-15 2T@1.9vdimm 2x EVGA 580GTX 1.5GB SLI 2x 74GB Sata Raptor Raid0 2x 320GB Hitachi Sata II X-FI Elite Pro Dell U3011 Lian Li V2100B Corsair HX1000
sofie_59 Posted December 5, 2010 Posted December 5, 2010 Infront of my eye:smilewink: MB:MSI X79A-GD45 CPU:Intel Core i7 3930K 3.2GHz Ram:16 gb Grafik :GTX 680 Sli Win 7 64 bit 1200 W 2 ssd 120 gb 1 2 TB western Digital Caviar Green
JG27_Arklight Posted December 5, 2010 Author Posted December 5, 2010 I tested some more, and it was the Warthog. It kept auto-assigning keys when I tried to reassign keys in RFactor. I unplugged the Warthog and RFactor no longer has the mapping issue. Ugh... Ark ------------------ Windows 10 Pro x64 9900K @ 5ghz Gigabyte Aorus Master Z390 32GB G.Skill Trident Z RGB CAS 14 EVGA RTX 2080 Ti Ultra XC2 256gb Samsung 869 Pro (Boot Drive) 1TB - Samsung 970 EVO Plus Seasoninc 1000w Titanium Ultra PSU 34" ASUS PG348
topdog Posted December 6, 2010 Posted December 6, 2010 You know that the warthog is a little odd and that sometimes you might think a button is off/depressed, when actually it is on? For example, closing the throttle down completely to the 'engine off' position is actually pressing ON a joystick button for each one. To get the desired result, you actually need to put them into the engine idle position instead. Flaps should be on MVR, and other switches should either be centered if they have a center, or down if they're only 2 way. Center the 'fakey' throttle friction wheel. In this way, you should find in the Windows Control Panel > Game Controllers > stick/throttle that all the buttons are off, and it should stop appearing to auto-assign itself to any input configuration software. [ i7 2600k 4.6GHz :: 16GB Mushkin Blackline LV :: EVGA GTX 1080ti 11GB ] [ TM Warthog / Saitek Rudder :: Oculus Rift :: Obutto cockpit :: Acer HN274H 27" 120Hz :: 3D Vision Ready ]
sofie_59 Posted December 6, 2010 Posted December 6, 2010 And the Cougar is lighten up every button when i move my pedals, I have the Cougar as docking station for my F16c pedals. But it dosnt interferes whit enything. MB:MSI X79A-GD45 CPU:Intel Core i7 3930K 3.2GHz Ram:16 gb Grafik :GTX 680 Sli Win 7 64 bit 1200 W 2 ssd 120 gb 1 2 TB western Digital Caviar Green
Teej Posted December 7, 2010 Posted December 7, 2010 (edited) 1: Close TARGET (or at least make sure a profile isn't running) 2: 2-position switches to the rear (EAC, RDR ALTM, ENG FLOW, APUetc). 3: 3 position switches (flaps, pinky, autopilot, speedbrake, boatswitch, ENG OPER) to the middle position (ie AP to "ALT/HDG", ENG OPER to 'NORM', etc). 4: Throttles off the idle stop. Done. Edited December 7, 2010 by Teej "Tank! I need a program for a TM Warthog!" [sIGPIC][/sIGPIC] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Thermaltake V9 SECC case | Corsair RM750 PSU | Asus ROG Ranger VIII | Intel i7 6700K | 16GB 3000mhz RAM | EVGA GTX 980Ti FTW | TrackIR 4 w/ pro clip | TM HOTAS Warthog | TM MFD Cougar Pack | Win 10 x64 |
Recommended Posts